FEIYUTEK 3-Axis Video Stabilized Handheld Gimbal for iPhone User Manual
- June 7, 2024
- FEIYUTEK
Table of Contents
FEIYUTEK 3-Axis Video Stabilized Handheld Gimbal for iPhone
Product Overview
Never submerge the gimbal in water
Package List
Enclosed: How to use the compatible accessories
User Guide
Install the battery
Remove the handle and insert one 22650 battery into it. Install the
smartphone
Attach the smartphone with the quick-release adapter, and ensure it is secure.
Tips: Please take off the protective casing of the smartphone before
installation.
Attention:
- Please install the smartphone before powering on the gimbal
- When not in use, turn off the gimbal and then remove the smartphone
Balance Adjustment
Power on / off
Power on: Long press function button and release it until the green light
is on.
Power off: Long press function button and release it until the red light
changes from quick flashing to constant.
Attention: Make sure the smartphone is secure before power on the Gimbal.
In case of low battery, the indicator will flash red 3 times every 5 seconds. Please charge SPG or replace the battery.
Download and connect App
Download App
Please download Feiyu ON at your smartphone app store or can the QR code
below.
Requires iOS 9.0 or later, Android 6.0 or later.
Connecting App
Start the App on your smartphone, follow the instructions to connect the smartphone with gimbal via bluetooth.
Mode / Function Operation Instructions
Operation
Explanation of LED indicator status
Vertical Shooting
Charging
Please make sure the battery was fully charged before you power on the gimbal first time.
Option 1: charging with micro USB cable.
Option 2: remove the battery and charge the battery with charger(equipped by user).
Firmware Upgrade
Upgrade the firmware through the Feiyu ON App.
- Click the icon
- Select upgrade type.
- Follow the prompts to upgrade the firmware.
Upgrade type introductions:
Gimbal update: Repair / update or newly add gimbal control / function /
parameter and etc.
Keyboard update: Repair / update or newly add button/touch
screen/interaction functions, update more compatibility cameras which can be
controlled through WIFI, repair few bugs about camera control through WIFI,
and etc.
Gimbal initialization
You can initialize your gimbal when:
- when smartphone is not level
- if not used for a long period of time
- in case of extreme temperature variations
Adjusting steps:
Long press function button and release it until the red light flash the gimbal enter the standby mode, the blue light will flash 3 times periodically.
Lay the gimbal on a static flat surface and triple tap the function button. Initialization is successful when the blue light changes from constant on to flashing 3 times periodically, otherwise fail.
Parameters
D I S C L A I M E R
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third- party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may cause changes in function descriptions in this user manual, please read the instructions carefully before upgrading the firmware and use the corresponding user manual.
Feiyu Tech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>