Diida Electric Hot Pot Cooker Instruction Manual

Table of Contents

Diida Electric Hot Pot Cooker Instruction Manual

Diida Electric Hot Pot Cooker Instruction Manual - Introduction to
components

Before using this product, please read this manual carefully, especially the “Safety Precautions”.
Put the pot body on the table top, put in appropriate amount of water or food materials, cover the pot cover, plug in the power plug, and turn the knob to the “small” or “large” position, and the electric cooker will enter into the working state.
If it is necessary to use the steamer, put appropriate amount of water or food materials into the pot body, then put the steamer on the pot body, put appropriate food to be steamed into the steamer, cover the pot cover, plug in the power plug, turn the knob to the “small” or “large” position, and the electric cooker will enter into the working state.

Please add appropriate amount of water or food materials according to the water mark on the pot body, do not exceed the maximum water level, and do not have too little water in the pot to avoid working without water.
In order to prevent the phenomenon of water overflowing out of the pot, please lift the pot cover when the water is boiling quickly, and keep away from the pot body to prevent scalding.
If you want to stop heating, please turn the knob to the “off” position and unplug the power plug.
Du ring the operation of the electric cooker, it is strictly forbidden to touch the heating plate and the surface of the product by hand to avoid scalding.
To ensure food health, do not reuse cooked oil.
Before the first use, fill the pot with water to the maximum water level, select the “big” function, then pour out the boiling water after completion, and then repeat it again to clean the inside of the pot body to remove the odor.

Diida Electric Hot Pot Cooker Instruction Manual - Name of
components

Before clean ing the electric cooker, pull off the power plug and let it cool down.
Do not immerse the electric cooker, power cord, power plug and power base in water.
Make sure the electrical wiring is dry.
Wipe the shell of the electric cooker with a wet cloth. Do not use scrubbing powder, cleaning paste and other products, because they will damage the lustre of the electric cooker.
The surface of the pot body is coated with a non stick coating. To prevent scratching the surface coating, please use a wooden or plastic shovel.
The pot body has a non stick coating and is easy to clean. Do not use any meta l or other sharp objects to clean the electric cooker, which may cause the coating to fall off or scratch.