COROS W331 Pace 2 Running Watch User Guide
- June 12, 2024
- COROS
Table of Contents
COROS W331 Pace 2 Running Watch
Product Information
The product is a device developed by COROS Sports Technology. It is designed
for various activities and is compatible with the COROS app. The device comes
with a charging cable and has specific charging specifications. It also
complies with safety standards and regulations.
Charging Specifications
- Input: 5V1A
Battery Warnings
- Do not perform an unauthorized battery replacement.
- Avoid excessive exposure to extreme hot or cold temperatures.
- Do not submerge the battery.
- Keep the battery away from children.
IC Warning
This device complies with Innovation, Science, and Economic Development
Canada license-exempt RSS standard (s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
Regulatory Information
For regulatory information, certification, and compliance marks specific to
the product, go to Settings > More Settings > About Product Name.
Manufacturer Information
The device is manufactured by Guangdong COROS Sports Technology Joint Stock
Company in China. The importers for the United States, European Union, and
United Kingdom are COROS Wearables, Inc., COROS Netherlands B.V., and COROS
Wearables UK Ltd. respectively.
Contact Information
- China Manufacturer: Guangdong COROS Sports Technology Joint Stock Company, Room 601 & 701, Bld. 2, No. 2, Science and Technology 9 Rd, Songshan Lake Hi-Tech Zone, Dongguan, Guangdong 523808, China
- USA Importer: COROS Wearables, Inc., 3 Peters Canyon Road Suite 100, Irvine, CA 92606, United States
- EU Importer: COROS Netherlands B.V., De Oude Veiling 79M, 1689 AD Zwaag, Netherlands
- UK Importer: COROS Wearables UK Ltd., Office 4, Embsay Mills, Skipton, North Yorkshire, BD23 6QF, United Kingdom
FCC ID and IC
- FCC ID: 2BBGF-W331
- IC: 29574-W331
Product Safety
The product meets safety standards and regulations. It is advised to follow the provided charging specifications and battery warnings. The device should not be left on the charger for an extended time to avoid battery damage. Charging in wet conditions should be avoided.
Product Usage Instructions
- Download and install the COROS app from app.coros.com or respective app stores.
- Sign up using your email address and agree to the COROS Privacy Policy and Terms of Service.
- Verify your email address by entering the verification code sent to your email.
- Open the COROS app and navigate to the “My Device” section.
- Select “Add New Device” to start pairing with the device.
- Follow the on-screen instructions to complete the pairing process.
- Once paired, you can view your progress, activities, explore features, and manage your profile using the COROS app.
- To scan for warranty and safety information, use the built-in QR code scanner in the COROS app.
Please refer to the user manual or the “Settings > More Settings > About product Name” section in the COROS app for additional information, regulatory compliance, and certifications specific to your product.
Download the COROS app
Create your COROS account
Press to power on
Pair with the COROS app
Scan with the COROS app for warranty and safety information
- Charging Specs
- Input: 5V 1A
This device comes with a charging cable. Please only use COROS accessories to charge this device. Do not leave the device on the charger for an extended time to avoid damage to the battery. Please avoid charging in wet conditions.
Battery Warnings
- Do not perform an unauthorized battery replacement.
- Avoid excessive exposure to extreme hot or cold temperatures.
- Do not submerge the battery.
- Keep the battery away from children
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. For face-up,10mm was
used for the test, this equipment should be installed and operated with a
minimum distance of 10m.
IC Warning
This device complies with Innovation, Science and Economic Development Canada
license-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
IC exposition aux radiations: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For face-up,10mm was used for the test, this equipment should be installed and operated with a minimum distance of 10m
CE Statement
COROS hereby declares that this product complies with the essential
requirements and the other relevant provisions of Directive 2014/53/EU. The
full text of the EU Declaration of Conformity is available at the following
web link: https://coros.com/declaration-of-conformityThis device contains a
Bluetooth module for smartphones and external sensors connection. The
Bluetooth module uses a 2.4 GHz frequency and may interfere with inflight and
ground communication devices.
- COROS PACE 2 Bluetooth: 2400MHz – 2483.5MHz, -6.53dBm;
- COROS APEX 2 Bluetooth: 2400MHz – 2483.5MHz, 3.17dBm WIFI: 2400MHz – 2483.5MHz, 14.76dBm;
- COROS APEX 2 Pro Bluetooth: 2400MHz – 2483.5MHz, 3.47dBm WIFI: 2400MHz – 2483.5MHz, 6.93dBm;
- COROS VERTIX 2 Bluetooth: 2400MHz – 2483.5MHz, 9.26dBm WIFI: 2400MHz – 2483.5MHz, 14.44dBm;
- COROS PACE 3 Bluetooth: 2400MHz – 2483.5MHz, 11.79dBm WIFI: 2400MHz – 2483.5MHz, 13.68dBm
Instructions to user
For regulatory information, certification, and compliance marks specific to
the product Name, go to Settings > More Settings > About Product Name.
Guangdong COROS Sports Technology Joint Stock Company
Room 601 & 701, Bld. 2, No. 2, Science and Technology 9 Rd, Songshan Lake Hi-
Tech Zone,
Dongguan, Guangdong 523808, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>