COROS B19 GPS Sports/Outdoor Watch User Manual
- June 6, 2024
- COROS
Table of Contents
- GPS
- Navigation (Available on select models)
- Maps (Available on select models)
- Oximeter (Available on select models)
- ECG Monitor (Available on select models)
- External Sensors
- Wearing the Device and Heart Rate
- Sensors
- Daily Maintenance
- Accessories
- Bluetooth
- Safety Warnings
- Hazardous Materials in the COROS Watch
- Warranty
- Returns
- Screen Repair
- Global Compliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GPS
By using any one of the outdoor activity profiles (i.e. swim, cycle, run), you
are activating the GPS automatically. If GPS is being used to calibrate
altitude, the margin of error is within approximately 165ft.
For best results, avoid locations with signal interference and allow GPS to
locate your position prior to starting an activity.
Note: GPS signal will be lost if the COROS device is submerged
underwater. For open water swimming, it is recommended to use freestyle
strokes for better GPS accuracy.
Navigation (Available on select models)
If your COROS device supports navigation functionality, you may pre-load the
route to the device as a . GPX file from the COROS APP.
Note: Using navigation will automatically turn on the GPS. Please use your
best judgment during navigation.
Maps (Available on select models)
If your COROS device supports mapping functionality, you may access it from
the main menu under Maps.
Note: COROS uses a third-party provider for map data information. Please read
the terms and conditions of the provider before downloading and using the
mapping function. COROS is not responsible for the accuracy of the data and
the stability of the connection.
Oximeter (Available on select models)
The optical oximeter sensor flashes an infrared light onto the wrist to
determine the user’s blood oxygen level. In order to ensure the accuracy of
the oximeter sensor, please fasten your watch band and make sure the watch
fits securely against your wrist.
The optical oximeter is available on select COROS watch models. To see a
complete list of compatible models, please visit
www.coros.com.
Note: The oximeter sensor is not for medical use and may be subject to
external interference. Certain circumstances may cause the blood oxygen
reading to be inaccurate. Blood oxygen readings are for reference only and
COROS shall not be held responsible for the consequences of any readings.
ECG Monitor (Available on select models)
The ECG monitor receives signals from the electrodes on the surface and back
of the watch to detect heart rate variability for fitness condition
assessments. Please make sure the electrodes are in full contact with your
finger and wrist when taking a measurement. Dry skin and constant movement
will affect ECG signals.
The ECG monitor is not for medical use and may be subject to external
interference. The data captured by this ECG monitor may not be completely
accurate and is for reference only. COROS shall not be held responsible for
the consequences of any readings.
External Sensors
The COROS device supports many wireless ANT+ and Bluetooth Smart sensors. The first time you connect an ANT+ or Bluetooth Smart enabled sensor to the COROS device, navigate to Menu > Settings > Accessories > Add ANT+ or Add Bluetooth to complete the pairing process.
Wearing the Device and Heart Rate
The COROS watch uses an optical heart rate monitor, that flashes a green LED
light onto the wrist to measure heart rate. To improve the accuracy of the
heart rate monitor, please fasten your watch band and make sure the watch
rests securely on your wrist.
Note: The heart rate monitor is not for medical use and may be subject to
external interference. Always consult your physician before starting an
exercise program. Heart rate data is for reference only and COROS shall not be
held responsible for the consequences of any readings.
Sensors
The COROS device is equipped with a geomagnetic sensor, thermometer,
barometer, gyroscope, and accelerometer. An accelerometer is used for
detecting hand gestures, steps and the calculation of Caloric data. The
compass uses a geomagnetic sensor to show directions. Both the thermometer and
barometer will detect ambient temperature and atmospheric pressure.
Note: The data captured by these sensors may not be completely accurate and is
for reference only.
Daily Maintenance
It is recommended you thoroughly clean your COROS device to remove excess sweat and debris after frequent usage. If not properly cleaned, residual sweat may corrode the device. To properly clean the device, please use mild soapy water and ensure the device remains dry when contacting the skin. If skin irritation occurs, remove the device immediately. Keep the heart rate monitor sensor and charging port clean and clear of debris (i.e. sand, sweat, dirt, etc.). Avoid excessive exposure to extreme hot or cold temperatures.
Accessories
The COROS device comes with a USB charging cable and a watch band. Please
remove and clean the watch band regularly to avoid skin irritation. The
watchband is not covered under the warranty policy.
Note: Please only use the COROS charging cable and watch band.
Bluetooth
The COROS watch contains a Bluetooth module for smartphones and an external sensor connection. The Bluetooth module uses a 2.4 GHz frequency and may interfere with inflight and ground communication devices. (Bluetooth: 2402~2480MHz / EIRP: 1mW)
Safety Warnings
Battery Warnings
Do not perform an unauthorized battery replacement. Avoid excessive exposure
to extreme hot or cold temperatures. Do not submerge the battery. Keep the
battery away from children.
Data Security
Accidental damages and improper operation may cause daily and workout data
loss. Please sync the COROS device with the COROS APP regularly. Product
repair may cause data loss.
Privacy
You can find detailed Privacy Policy and Terms of Service in the COROS APP on
the About Us page.
Hazardous Materials in the COROS Watch
Toxic Materials
Component| (Pb)| (Hg)| (Cd)| Cr(VI)| (PBB)| (PBDE)
Components in the
watch body| X| O| O| O| O| O
Wrist Band| O| O| O| O| O| O
Battery| X| O| O| O| O| O
Charging Cable| O| O| O| O| O| O
Warranty
COROS products are manufactured to the highest quality standards possible. However, on the rare occurrence should one suffer quality issues, we stand behind our products. All COROS Helmets & Watches include a 2-year warranty from the date of purchase. Accessories are covered by a 90-day warranty. Should you have an issue with your product resulting from a manufacturing defect, COROS will help replace your product or remedy your issue. Simply reach out to us via phone or e-mail to assist in completing a warranty claim and our team will handle your claim in a timely fashion.
United States & Canada
Phone: 714-389-0269 (9am-6pm PST, M-F)
E-mail: support@coros.com
Should you need support outside the United States & Canada, please reach out
to the contacts above, and we’ll direct you to the best local support.
COROS Wearables Inc. (“COROS”) warrants that the Product (defined below)
delivered hereunder to the original purchaser (“Original Purchaser”) from
COROS.com or a COROS Authorized Reseller (each an “Authorized Reseller”) will
be free from material and workmanship defects that adversely affect the
performance of the Product under normal use, pursuant to the terms outlined
below. This Limited Warranty is only valid for the Original Purchaser, is non-
transferable, and does not extend to any used Products or Products not
purchased from COROS.com or an Authorized Reseller.
Products Covered and Warranty
Length For purposes of this Limited Warranty, “Products” and “Product” means
the individual COROS product(s) as described below by the following prefix:
Multisport Watches
Limited Warranty
Term The length of the Limited Warranty is limited to two years from the
original date of purchase for all products except accessories. Accessories
have a 90-day warranty.
Nothing in the Product instructions or information shall be construed to
create an express warranty of any kind with respect to the Products. No agent,
employee, dealer, representative, or reseller is authorized to modify or
extend this Limited Warranty or to make binding representations or claims,
whether in advertising, presentations or otherwise, on behalf of COROS
regarding the Products or this Limited Warranty.
Nothing in this Limited Warranty affects any statutory rights of consumers
that cannot be waived or limited by contract. This Limited Warranty gives you
specific legal rights, and you may also have other rights which vary from
State to State or Province to Province.
If any portion of this Limited Warranty is held to be illegal or
unenforceable, such partial illegality or unenforceability shall not affect
the enforceability of the remainder of the Limited Warranty.
These Limited Warranty terms shall be governed in all respects by the laws of
the United States and of the State of California, without regard to the
conflicts of laws and principles thereof. The United Nations Convention on
Contracts for International Sale of Goods is specifically disclaimed. The
state and/or federal courts residing in Orange County, California shall have
exclusive jurisdiction over any dispute or claim arising out of these Limited
Warranty terms.
What is not covered by this Limited Warranty
This Limited Warranty applies only to Products used in accordance with this
Limited Warranty and COROS’s published documentation and does not cover:
Products that are modified outside of factory specifications and/or not in
factory condition.
Products with modification to the serial number and/or factory identification
label whether removed, relocated, falsified, defaced, damaged, altered or made
illegible.
Damages to the body of the product whether cut, scratched, warped, bent,
cracked, dented or broken.
Any damages to the components, hardware and/or assembly of the Products
including but not limited to damages caused as a result of neglect, abuse,
accidents, misuse, or unusual physical, electrical or electromechanical
stress.
Any missing hardware, components and/or assemblies of the Product.
Cosmetic damages deemed outside of reasonable usage are caused by deep
scratches, cuts, cracks, dents, discoloration, neglect, dropping or
mishandling the product.
Products that are exposed to liquid, liquid residue or excessively humid
environments result in rust, moisture, dampness, stains, corrosion or liquid
spills on components, hardware or electronics. Burns or component flare-ups as
a result of a liquid accident or spill.
Direct usage of paint, submersion of the power supply in oil, use of adhesives
or glues on any part of the Product, usage of solder to the Product,
electronics and/or component modification.
Exposure to cigarette tar residue, dampness, sand, dirt or excessive debris.
Products that are rendered non-functional due to an accident, collision with
an object or tool, use of excessive force, neglect for care, exposure to fire
or abnormal heat, flooding, dirt, windstorms, lightning, earthquakes,
excessive weather conditions, or other acts of God, theft, blown fuses,
improper use of any electrical source, or overloaded electrical circuits.
Defects or damage resulting from the use of a 3rd party product in conjunction
or connection with accessories, products, software or secondary peripheral
equipment not furnished for the usage with or approved for the Product by
COROS.
Defects or damages resulting from improper testing, operation, maintenance,
installation, service, or adjustment not furnished or approved by COROS.
The use of inadequate shipment packaging or use of inadequate packing material
resulting in damages to the Product while in transit with Original Purchaser’s
or Second-Hand Purchaser’s shipping courier.
Products purchased from unauthorized resellers or dealers, which include,
without limitation, online marketplaces such as eBay (except for COROS’s
official eBay store),
Amazon (except for COROS’s official Amazon Marketplace store), and other
online auction and/or marketplace websites. If you are unsure of whether a
reseller is an Authorized Reseller, please contact COROS for confirmation.
Exclusive Remedy and Limited Refunds
Except as specifically provided below, your sole remedy for a defective
Product shall be the repair or replacement of such defective Product in
accordance with the terms and conditions of this Limited Warranty.
COROS only offers refunds for products purchased directly from its official
website COROS.com if such products are returned within 30
days of purchase. For products not purchased at COROS.com,
refund claims, if any, are subject to the Authorized Reseller’s refund policy
and must be processed through the original Authorized Reseller’s return
policy. COROS will not honor any refunds offered through Authorized Resellers.
COROS does not cover shipping costs for products that are returned for a
refund.
How to obtain Warranty Service
To obtain warranty service Service under this Limited Warranty, you must
contact COROS to receive a Return Merchandise Authorization (“RMA”) number
prior to returning the product to COROS in accordance with the COROS RMA
Process. Please contact COROS Technical support at
714-389-0269 or contact us by email at
info@COROS.com.
Product Warranty Replacement COROS reserves the right to verify the validity
of your warranty and your request for warranty service.
COROS reserves the right to invoice you for shipping fees and service charges
for any incomplete, damaged or modified Product that is returned to COROS and
requires repair or replacement or that is not otherwise covered under this
Limited Warranty. Service charges are variable based upon the actual material
and labor cost reasonably necessary to replace missing or return modified
parts to their original factory condition.
Products sent in for RMA will be repaired and returned or replaced with a
thoroughly tested recertified product of equal or greater performance.
This COROS Limited Warranty begins from the date that the Product was
originally purchased, as verified by a proof of purchase provided and/or
confirmed by an Authorized Reseller.
All products returned to Original Purchasers or Second-Hand Purchasers from
COROS’s RMA department are thoroughly tested recertified products. Replacement
parts and/or Products may include new or refurbished parts or Products and are
warranted only until the expiration of the original warranty period.
Replacement parts and/or Products will meet the standard of performance and
reliability of a new product or part of the same model, however, such Products
and/or parts may have small scratches, small dents, other cosmetic defects, or
noticeable use.
If an RMA is necessary within 30 days of the original purchase date of a new-
in-box Product, a new-in-box OEM replacement will be sent to the Original
Purchaser in return, subject to availability.
Warranty Replacement Shipping
COROS will ship to the confirmed address at the time your RMA is approved.
If your warranty replacement is unable to be delivered due to the address
being invalid or delivery is not made due to lack of access, no known address,
security obstacles, or gated areas, you are responsible for a redirect or re-
ship fee which will vary depending on your region. You must contact COROS
prior to shipment for assistance to avoid this charge. COROS is not
responsible for packages delivered to an outdated address.
If the product is returned to COROS due to non-delivery you will be
responsible to pay for any additional shipping charges for the reshipment.
COROS encourages you to review your shipping address prior to submitting any
RMA request.
All RMA replacements will state “Warranty Replacement” on the package to
assist in avoiding any taxes, duties, and/or brokerage fees through customs or
otherwise. COROS is not responsible for any fees charged by the destination
country’s government body, brokers or another third party. COROS is not
responsible for any unclaimed package that is held by your governing body for
clearance from customs or otherwise, that becomes abandoned as a result of the
refusal of clearance compliance.
Postal mail is not recommended for shipping any COROS product. If your package
is received with physical damage, a claim cannot be processed due to the
limitations of postal services, and the package will be returned to the sender
without alternative options.
We reserve the right to update this Limited Warranty
We have and will continue to make policy changes over time. Make sure you read
this document carefully and check back for updates. COROS reserves the right
to change this policy without notice. Last update July 29, 2019.
Returns
All products purchased from COROS.com is eligible for
returns within 30 days of purchase for a full refund of the original purchase
price. To start a return, please contact
support@coros.com. Consumers outside the United
States are responsible for return shipping.
Products must be returned in their original physical condition with all
accessories unless said returned product suffers from defects in material and
workmanship from the manufacturing process.
Screen Repair
Should the screen of your COROS watch get damaged in use, COROS offers a service to repair or replace your watch for the cost of $100/unit. Contact support@coros.com for more detailed information.
Global Compliance
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device Types B19 has also been tested against this SAR limit. The highest SAR
value reported under this standard during product certification for use when
properly worn on the body is 0.138 W/kg.
CE statements This device is operated the frequency bands and the maximum
output power (E.I.R.P) :
Bluetooth: 2402MHz 2480MHz, 9.26dBm;
WIFI: 2.412GHz – 2.472GHz, 14.44dBm;
The SAR limit of Europe is 2.0 W/kg. Device types B19 have also been tested
against this SAR limit. The highest SAR value reported under this standard
during product certification for use worn on the body is 0.218 W/kg.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The adapter shall be installed near the equipment and shall be easily
accessible. the recommended output voltage/current of the adaptor is 5Vdc/2A.,
and the adapter shall be CE approval type.
The suitable temperature for the product and accessories is -20~45.
FCC ID:2AEHH-B19
Model Name: B19
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>