Jabra Engage 55 USB-A MS Mono with Charging Stand User Manual
- June 3, 2024
- Jabra
Table of Contents
Jabra Engage 55 USB-A MS Mono with Charging Stand
How do I connect my Jabra Engage 55 headset directly to a connect
computers?
Follow these steps to connect your Jabra Engage 55 directly to a connect computers:
-
Plug the supplied micro USB cable into a free USB port on the computer.
-
Press and hold the Volume (+) button on the headset while you plug the micro USB cable into the headset at the same time.
-
As soon as the LED on the headset stops flashing green, release the button Come on. The headset can now be used as an audio playback device on the computers are used.
A Notice
While connecting the headset via the USB cable, the Call Control and Busy light headset features not supported. When a cable (such as a charging or audio cable) is plugged into the USB port on the headset is plugged in, you may notice that the Headset gets a little warmer around the USB port. One easy increased operating temperature is normal and within safe limits operational requirements. This does not affect the lifespan or the performance of the headset. However, should you find that the headset generates significant heat or becomes significantly warmer than normally when charging or during use Stop using the headset immediately and contact the Jabra reseller from whom you purchased the headset.
References
- [FAQTitle] | Jabra Engage 55 - USB-A MS Mono with Charging Stand | FAQ | Jabra Support
- How do I connect my Jabra Engage 55 headset directly to a computer? | Jabra Engage 55 - USB-A MS Mono with Charging Stand | FAQ | Jabra Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>