BLONDER TONGUE Headend Passive Combiners Instruction Manual
- June 7, 2024
- BLONDER TONGUE
Table of Contents
INSTRUCTION MANUAL
HPC Series
Headend Passive Combiners
| Model | Stock No. | Description |
|---|---|---|
| HPC-8 | 5791 | 8-port Headend Passive Combiner, 8.0-inch deep, 5-1000 MHz |
| HPC-12 | 5792 | 12-port Headend Passive Combiner, 8.0-inch deep, 5-1000 MHz |
| HPC-12S | 5792S | 12-port Headend Passive Combiner, 2.9-inch deep, 5-1000 MHz |
| HPC-24 | 5790 | 24-port Headend Passive Combiner, 8.0-inch deep, 5-1000 MHz |
| HPC-24S | 5790S | 24-port Headend Passive Combiner, 2.9-inch deep, 5-1000 MHz |
| HPC-32 | 5796 | 32-port Headend Passive Combiner, 8.0-inch deep, 5-1000 MHz |
| Status | Date | Document No. |
| --- | --- | --- |
| Active | October 9, 2009 | 651224300A |
©2009 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of their respective owner.
We recommend that you write the following information in the spaces provided below.
Purchase Location Name:
|
---|---
Purchase Location Telephone Number:
|
HPC Series Serial Number:
|
The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or additions.
Document Number: USA 651224300A
All product names, trade names, or corporate names mentioned in this document
are acknowledged to be the proprietary property of the registered owners.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Reverse engineering or disassembly is prohibited.
Returning Product for Repair (or Credit)
A Return Material Authorization (RMA) Number is required on all products
returned to Blonder Tongue, regardless if the product is being returned for
repair or credit. Before returning the product, please contact the Blonder
Tongue Service
Product Summary
Revision History & Reason
This is the first issue of the Instruction Manual.
Product Series, Application & Description
HPC series consists of 5-1000 MHz passive RF combiners designed for use in a
headend to combine the output of up to 32 single-channel devices such as
modulators and processors. HPC is available in 8-, 12-, 24-, or 32-port
models.
All HPC models feature a compact design, high isolation between ports, low net
combining loss, and RFI shielding for minimized egress/ingress interference. A
front-panel -20 dB test port (75-ohm “F” type connector) allows testing of the
unit’s output without interrupting the service.
HPC-24 Application
Performance Specification (Typical)
| Frequency (Mhz| HPC-8| HPC-12 & 12S| HPC-24& 24S| HPC-32
---|---|---|---|---|---
Max. Insertion Loss (dB)| 5-40| 11.2| 14.3| 17.2| 17.2
40-450| 11.2| 14.3| 17.5| 17.5
450-750| 12| 15| 19| 19
750-1000| 12.5| 16.5| 20| 20
Min. Isolation (dB)| 5-40| 24| 30| 30| 30
40-450| 27| 32| 32| 32
450-750| 27| 30| 30| 30
750-1000| 23| 28| 28| 28
Test Port (dB)| 5-40| 20+/-0.5| 20+/-0.5| 20+/-0.5| 20+/-0.5
40-450| 20+/-0.5| 20+/-0.5| 20+/-0.5| 20+/-0.5
450-750| 20+/-0.5| 20+/-0.5| 20+/-0.5| 20+/-0.5
750-1000| 20+/-0.5| 20+/-0.5| 20+/-0.5| 20+/-0.5
Input Return Loss (dB)| 5-40| 18| 20| 20| 20
40-450| 22| 20| 20| 20
450-750| 22| 20| 20| 20
750-1000| 18| 18| 18| 18
Output Return loss| 5-40| 18| 20| 20| 20
40-450| 22| 20| 20| 20
450-750| 22| 18| 18| 18
750-1000| 18| 18| 18| 18
Impedance| 5-1000| 75 Ohms| 75 Ohms| 75 Ohms| 75 Ohms
General Specification
Dimensions (W x D x H):
HPC-xx
HPC-XXS| 19.0 x 8.0 x 1.75 inches (483 x 203 x 44 mm)
19.0 x 2.9 x 1.75 inches (483 x 74 x 44 mm)
---|---
Shipping Weight:
HPC-xx
HPC-xxS| 2.3 lbs (1.04 kg)
1.9 lbs (0.86 kg)
Connectors
Inputs:
Output:
Test Port:| “F” Type Female
“F” Type Female
“F” Type Female
Limited Warranty
Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair
or replace (with a new or factory reconditioned product, as BT may determine)
any product manufactured by BT which proves to be defective in materials or
workmanship or fails to meet the specifications which are in effect on the
date of shipment or such other specifications as may have been expressly
agreed upon in writing (i) for a period of one (1) year from the date of
original purchase (or such shorter period of time as may be set forth in the
license agreement specific to the particular software being licensed), with
respect to iCentral™ (hardware and software) and all other software products
(including embedded software) licensed from BT, (ii) ) for a period of one (1)
year from the date of original purchase, with respect to all MegaPort™, IPTV
products, and fiber optics receivers, transmitters, couplers and integrated
receiver/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™, and
TWIN STAR™ products) as well as for DigiCipher ® satellite receivers, and
(iii) for a period of three (3) years from the date of original purchase, with
respect to all other BT products. Notwithstanding the foregoing, in some
cases, the warranty on certain proprietary sub-assembly modules manufactured
by third-party vendors and
contained in BT products and on certain private–label products manufactured by
third parties for resale by BT are of shorter duration or otherwise more
limited than the standard BT limited warranty. In such cases, BT’s warranty
with respect to such third-party proprietary sub-assembly modules and private-
label products will be limited to the duration and other terms of such third-
party vendor’s warranty. In addition, certain products, that are not
manufactured but are resold by BT, carry the original OEM warranty for such
products. The limited warranty set forth in this paragraph does not apply to
any product sold by BT, which at the time of sale constituted a
Refurbished/Closeout Product.
(b) BT will at its sole option, either repair or replace (with a new or
factory-reconditioned product, as BT may determine) any product sold by BT
which at the time of sale constituted a refurbished or closeout item
(“Refurbished/Closeout Product”), which proves to be defective in materials or
workmanship or fails to meet the specifications which are in effect on the
date of shipment or such other specifications as may have been expressly
agreed upon in writing, for a period of ninety (90) days from the date of
original purchase. Notwithstanding the foregoing, in some cases, the warranty
on third party software and on certain proprietary sub-assembly modules
manufactured by third-party vendors and contained in BT products and on
certain private–label products manufactured by third-parties for resale by BT
are of shorter duration or otherwise more limited than the BT limited warranty
for Refurbished/Closeout Products. In such cases, BT’s warranty for
Refurbished/Closeout Products constituting such third party software, third-
party proprietary sub-assembly modules, and private-label products will be
limited to the duration and other terms of such third-party vendor’s warranty.
In addition, notwithstanding the foregoing, (i) certain Refurbished/Closeout
Products that are not manufactured (but are resold) by BT, carry the original
OEM warranty for such products, which may be longer or shorter than the BT
limited warranty for Refurbished/Closeout Products. All sales of
Refurbished/Closeout Products are final.
To obtain service under this warranty, the defective product, together with a
copy of the sales receipt or other satisfactory proof of purchase and a brief
description of the defect, must be shipped freight prepaid to Blonder Tongue
Laboratories, Inc., One Jake Brown Road, Old Bridge, New Jersey 08857.
This warranty does not cover damage resulting from (i) use or installation
other than in strict accordance with the manufacturer’s written instructions,
(ii) disassembly or repair by someone other than the manufacturer or a
manufacturer-authorized repair center, (iii) misuse, misapplication or abuse,
(iv) alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain,
lightning, or any other weather conditions or acts of God.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION,
DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR AS TO ANY
OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE ANY ORAL OR WRITTEN WARRANTIES OR
REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S EMPLOYEES OR
REPRESENTATIVES, OR IN ANY OF BT’S BROCHURES MANUALS, CATALOGS, LITERATURE OR
OTHER MATERIALS. IN ALL CASES, THE BUYER’S SOLE AND EXCLUSIVE REMEDY AND BT’S
SOLE OBLIGATION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE
LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING
POINT, AS BT IN ITS SOLE DISCRETION SHALL DETERMINE. BT SHALL IN NO EVENT AND
UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL,
INDIRECT, INCIDENTAL, PUNITIVE, DIRECT OR SPECIAL DAMAGES BASED UPON BREACH OF
WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE
OR ANY OTHER LEGAL THEORY, ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE,
INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM BT. PRODUCT
ACQUIRED BY BUYER FROM BT.
All claims for shortages, defects, and non-conforming goods must be made by
the customer in writing within five (5) days of receipt of merchandise, which
writing shall state with particularity all material facts concerning the claim
then known to the customer. Upon any such claim, the customer shall hold the
goods complained of intact and duly protected, for a period of up to sixty
(60) days. Upon the request of BT, the customer shall ship such allegedly non-
conforming or defective goods, freight prepaid to BT for examination by BT’s
inspection department and verification of the defect. BT, at its option, will
either repair, replace or issue a credit for products determined to be
defective. BT’s liability and responsibility for defective products are
specifically limited to the defective item or to credit towards the original
billing. All such replacements by BT shall be made free of charge f.o.b. the
delivery point called for in the original order. Products for which
replacement has been made under the provisions of this clause shall become the
property of BT. Under no circumstances are products to be returned to BT
without BT’s prior written authorization. BT reserves the right to scrap any
unauthorized returns on a no-credit basis. Any actions for breach of a
contract of sale between BT and a customer must
be commenced by the customer within thirteen (13) months after the cause of
action has accrued. A copy of BT’s standard terms and conditions of sale,
including the limited warranty, is available from BT upon request. Copies of
the limited warranties covering third-party proprietary subassembly modules
and private-label products manufactured by third parties are also available
from BT on request. DigiCipher ® is a registered trademark of Motorola Corp.
(Rev 0509)
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>