PowerGlide® Pet Vacuum with SuctionChannel Technology® Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
-
Hold Dirt Container over garbage can and press the “Push to Empty” button
-
Release the Separator by twisting to the right to disconnect & remove
- Separator can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove all Filters
-
Remove Pre-Motor filters > Separate and check both sides for dirt
- Both Filters and Separator Screen can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post-Motor Filter
- Press the red release button to remove cover and access Post-Motor Filter
- This Filter cannot be washed and need to be replaced if dirty
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>