Siedle BTSV 850-03 Standard Bus Telephone Instruction Manual
- June 3, 2024
- Siedle
Table of Contents
Siedle BTSV 850-03 Standard Bus Telephone
Operating Instructions for end users
Accepting door calls
The ringing tones for the front door and apartment door are different. When a
visitor presses the door bell, the telephone rings and the mute button
flashes. The call can be accepted by pressing the speech button within 45
seconds after the last ringtone.
Actuating the door release
When you press the door release button, the door from which the last call came
is opened for 3 seconds. Switching on the light When you press the light
button, the lighting is switched on, provided this has been connected by your
electrical installer.
Muting the bell
When the mute button is pressed briefly, all the ringing tones are switched
off or on again. The button lights up red to indicate that the mute has been
activated. If a visitor rings the door bell while the in-house telephone is
switched to mute, the button flashes.
Selecting a door station
Lift the receiver. Press the light button twice to make a speech connection to
the door station from which the last call came.
Ringtone volume
The ringtone volume can be set to 5 different levels: With the receiver down,
press and hold down the muting button for 3 seconds to hear the set ringtone
volume. Press the mute button briefly and the volume increases by one level.
After the highest level it goes back to the lowest level. Save the selected
volume by pressing the mute button for 3 seconds.
Ringtone
You can choose between 11 ringtones. The ringtone is always set for the
last door to ring the doorbell; consequently you will need to first press the
bell at the front door or the apartment door. (A different ringtone can also
be selected for internal or group calls). With the receiver down, press and
hold down the door release and light button simultaneously for 3 seconds to
hear the set ringtone melody. Pressing the muting button changes the ringtone
melody. Save the selected ringtone melody by pressing the mute button for 3
seconds.
**Switching on the monitor
**
Pressing the monitor button will show the camera picture from the door which placed the last door call. This function is only possible if there is currently no call connected.
Brightness and colour
Brightness and colour can be adjusted using the two rotary controllers.
Button assignment
The light, monitor-on and mute buttons can also be programmed with different
functions. For further information, please contact your electrical installer.
Care instructions
Only ever clean your indoor device using a soft cloth dampened with mild soap
solution. Dry, aggressive cleaning agents and abrasive detergents can damage
the surface. Detailed care instructions are located in the download area of
www.siedle.com.
Servicing
Statutory warranty conditions apply. Exchange of the device in case of
servicing must be performed by your electrical installer.
S. Siedle & Söhne Postfach 1155 78113 Furtwangen
Telefon +49 7723 63-0
Telefax +49 7723 63-300
www.siedle.de
info@siedle.de
© 2009/07.21
Printed in Germany
Best.-Nr. 200040630-01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>