Rebel URZ3485-3 LED Floodlight User Manual
- June 4, 2024
- Rebel
Table of Contents
Rebel URZ3485-3 LED Floodlight
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before first use, and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.
- If the device or any of its part is damaged, do not use it and unplug it from power source. Do not repair the device yourself. Contact with an authorized service point for check-up/repair.
- Prior to any maintenance services, disconnect power supply and let the device cool down.
- Do not cover the device.
- WARNING: Do not look directly at LED light beam!
- Clean the device with soft and dry cloth. Do not use chemical detergents.
- Failure to follow these instructions may result in fire, burns, electrical shock, physical injury and other damage.
- WARNING: Device may heat up to a higher temperature. Do not touch the device when it’s hot.
- Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
FEATURES
- Device belongs to the group of energy efficient products.
- Minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating – 0,5 m.
- This device is build in a way that it is impossible to open it. Repair by user is not allowed.
MOUNTING
Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Check for proper mechanical fastening and connection to electrical power prior to first use.
-
Remove the mounting bracket from the Led floodlight. Drill the wall and screw the bracket onto the wall using suitable plastic wall plugs and screws. Check that the bracket is securely fitted on the wall.
Note: Do not at this stage re-attach the floodlight to the bracket. -
Connect the power cords:
• brown wire (ACL) of the floodlight with Live brown or red wire of the electrical wiring;
• blue wire (ACN) of the floodlight with Neutral blue or black wire of the electrical wiring;
• yellow-green wire of the floodlight with earth wire of the electrical wiring. 3 -
Re-attach the floodlight to the bracket and secure the cable to the wall using suitable clips. Ensure that the cable is not touching the body of the floodlight, and that there is sufficient slack in the cable to allow the floodlight to be tilted and adjusted as required, which should be done by grasping the metal body of the floodlight, not its rear wiring box.
Tips:
-
Do not install when it is raining.
-
The unit can be installed only horizontally
-
For outdoor installation, a location under eaves is preferable.
-
Do not allow sunlight to fall directly on the front of unit.
SPECIFICATION
| URZ3485-3
---|---
Light source| 168 pcs SMD2835
Power| 100 W
Color temperature| 6500 K
Luminous flux| up to 8000 lm
Efficiency| 75 lm/W
Power factor| 0,9
Beam angle| 120°
CRI| >80
Protection class| I
Protection rating| IP65
Working temperature| -20°C ~ +40°C
Lifespan| 20 000 h
Power supply| 220 – 240 V; 50 – 60 Hz
Correct Disposal of This Product
**(Waste Electrical & Electronic Equipment)
**
It is forbidden to place equipment waste marked with the symbol of a crossed- out trash bin together with other waste. This equipment is subject to collection and recycling. The harmful substances it contains can cause environmental pollution and pose a threat to human health.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>