TRiSTAR VE-5898, VE-5899 Stand Fan Instruction Manual

: June 3, 2024
: Tristar

Table of Contents

SAFETY
PARTS DESCRIPTION
BEFORE THE FIRST USE
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction manual
VE-5898
VE-5899

PARTS DESCRIPTION

SAFETY

This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Never move the appliance by pulling the cord and make sure the cord can not become entangled.
The appliance must be placed on a stable, level surface.
The user must not leave the device unattended while it is connected to the supply.
This appliance is only to be used for household purposes and only for the purpose it is made for.
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.

PARTS DESCRIPTION

Front guard
Fan blade lock button
Fan blades
Locknut for the rear guard
Rear guard
Oscillation pen
Clip
Control buttons
Knob for height adjustment
Base
Stand feet
Remote control

BEFORE THE FIRST USE

Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz) ASSEMBLY
Unscrew the four screws from the stand feet and cross the stand feet.
Place the pedestal on the feet and fasten the four screws in place.
Remove height adjustment ring by unscrewing and sliding up.
Slide stand cover down onto the base and screw the height adjustment ring back in place.
Loosen height adjustment ring to extend the extension rod and tighten back into place.
Loosen rear fixing knob and attach extension rod.
Unscrew the rear locking ring from the motor shaft in anti-clockwise direction.
Set the rear cage and fit it well on the two position holes and make sure these holes are properly put through the holes on the rear cage.
Hold the rear cage and screw the rear locking ring into the motor front cover in a clockwise direction.
Install the fan blade onto motor shaft and fit the fan blade lock cap.
Loosen the screw and nut on the bottom of the rear cage.
Open front cage clips and position onto rear cage ensuring the screw bottom is aligned between both.
Tighten screw and nut.
Close the cage clips over both front and rear cage.

USE

Use the speed control knobs to choose the desired ventilation level.
To make the fan head oscillate, push down the Oscillation Knob.
To stop the fan head from oscillating, pull-up the Oscillation Knob.
Press the off button to turn off the fan.

Using remote control

Press the on/speed control button to turn on the appliance. With each press on the on/speed control button you will be able to switch the fan speed between low, medium, and high.
Select the wind type setting be pressing the mode button on the remote control. With each press on the mode button you will be able to switch the fan between normal wind, nature wind and sleep wind.
Press the timer button to activate the timer.
When the fan is on, press the timer key to set the desired shut down time 0.5-7.5 hours.
Press the off button to turn off the fan.

CLEANING AND MAINTENANCE

Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

ENVIRONMENT
**** This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic omestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection. Support
You can find all available information and spare parts at www.tristar.eu!

http://www.tristar.eu
Tristar Europe B.V. | Jules Verneweg 87
5015 BH Tilburg | The Netherlands