NOWLEY Sport and Health Smartband Instruction Manual

NOWLEY Sport and Health Smartband

Compatible System and Requirement

1. Android 4.4 or above
2. IOS 8.0 or above
3. Bluetooth 4.0

Preparation

Please ensure the bracelet is fully charged for the first time usage. If you can’ t power on the bracelet due to low battery, please charge it for 1-1.5 hours. When you charge the bracelet under power-off condition, there is a “charging sign” on the screen. While charging the bracelet under power-on condition, the battery will show a “dynamic battery bar”.

Connection Instruction

Method1: Scan the code below to download the APP. Method2: Please ensure the bluetooth is on,and open “Wearfit”. Click the selection of link to bracelet,find the device name in the list and click it.Then enter the main interface.

Download the App

The Bracelet Function Specifications

• Heart rate monitoring: It The device will auto-climatically measures the present heart rate situation in the whole point.You can also manually measure the heart rate by APP. When the bracelet switched to Heart rate mode,the device will automatically start measuring . If you don’t want to measure the heart rate,please continue switching.

• Steps record: It will record the steps into bracelet every day. The steps will be counted according your movement of your arms.

• Stopwatch: Press it and hold for 5 seconds to enter the stopwatch→Click it to start→Click it to stop→Press it and hold for 5 seconds to exit.

• Distance display: Show the distance of movement.

• Calories Mode: Displays calories burned.

• Time mode: Display time, battery, date, current heart rate.

• Call reminder: Open the “Call reminder” the bracelet will vibrate when call comes in.

• Message reminder: Open the “Messagein APP, it will gently vibrate to remind you when the comes a new message (SMS, QQ, Wechat, Facebook, Twitter).

• Sleep monitoring: Automatically monitor your whole sleep quality and analyze the deep sleep and light sleep hours.

• OTA upgrade: It will continue to optimize and update for the functions.
  Use bracelet to find mobile: Long press “SEARCH” for 5 seconds→Press touch button to start→ Find the location of mobile according mobile ringtone and vibration→Long press for 5 seconds to exit. (Do make sure mobile App Bluetooth connected with bracelet and within signal acceptance distance.)

• Turn off: Go to Power off interface, press touch button (5 seconds)→select “YES” (then press for 5 seconds to turn off.)

• Heart rate monitoring/Blood pressure monitor: The device will automatically measures the present Blood oxygen/pressure situation in the whole point.You can also manually measure the ,the device will automatically start.

Q&A

1. Can’t find bracelet and can’t connect with it?

2. Please ensure the bluetooth is ON and the system of mobile phone is Android 4.4 or above and iOS 8.4 or above.

3. I f it still unable to connect, enter the phone settings → Application Management→Authorization Management→ Application Rights Management→Find application [WearFit]→ Allow all permissions as “allowed”→ Enter the phone settings and select GPS location and turn on GPS function. →Restart the phone→Try to connect.

4. Please ensure bracelet is fully charged.

5. The APP shows no connection after bound with bracelet, or it is connected but the power is 0%?In this case, the App is not bound with bracelet sucessfully, please rebind.

6. Can’t connect the device with APP?
   Pull down and refresh main interface, it will manually to synchronize the data, then it can display data in the APP. Auto-sync data will only be synchronized at first binding. Then it will automatic synchronize of data hourly. In addition, don t forget to open hourly measurement. Otherwise histogram hasn t any data.

7. Pull-down and refresh APP,the data is not loaded?
   App settings→Restore the factory settings→Click restore factory settings→Turn off the bracelet→ Restart bracelet→Match with APP. Then data can be loaded out.

8. Time for bracelet is not accurate?
   When the bracelet run out of power, the time of it may be in error after being recharged. Please connect with the mobile and the bracelet will automatically synchronize the time.

9. The bracelet time is not synchronized after connecting with the phone?
   Mobile phone settings→Application management/rights management→Open permissions of APP→ Reconnect the bracelet→Pull down and refresh it at main interface of the APP.

Remarks

1. If there is a quality or product usage problem, please contact the point of sale.
2. The measurement results of this product are for reference only, not for any medical purpose and basis. Please follow the doctor’s instructions and do not rely on the measurement results for self diagnosis and treatment.
3. The waterproof grade is IP67, which can be used for daily life waterproof. But the bracelet can not be used for diving and put under water for long time. In addition, this product does not prevent hot water, because steam will affect the bracelet.
4. Our company reserves the right to modify the contents of this manual without notification. Some functions are different in the various software version, which is normal.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>