BAUHN AFWGPS-0720 Smart Watch with GPS User Guide

Smart Watch with GPS
User Guide

Parts of the watch

First Time Use

Charge your watch before using for the first time. You will need to charge it for about 3.5 hours.

Charging steps:

1. Place the watch on top of the dock with the charging points on the back of the watch aligned with the charging pins on the charging dock. It will snap into position once correctly aligned.
   

2. Plug the USB charging dock into USB charging adaptor (not included) or a USB port on your computer.

3. Once fully charged (battery icon is full), unplug the charging dock from the charger.

Join Fit App

Search for the Join Fit app in the app store to download, or scan the QR code below for installation.
http://www.smawatch.cn/APP/Jion-Fit

Google Play and the Google Play logo are trademarks of Google LLC.

Apple, the Apple logo, iPhone, and iPad are trademarks of Apple inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.

Turn on the Watch

Once the watch is fully charged, press and hold the power button for 5 seconds to turn on the watch.
To turn off the watch, press and hold the power button for 5 seconds.

Connect to the App

Open the Join Fit app on your smartphone. Once the app is open, follow Device

Add device and select the first “AFWG0720″ from the list. The watch will display the below screen:
Tap on to confirm pairing and once connection is successful, the Bluetooth® icon will show at the shortcut menu.

The Join Fit app supports Android 5.0+ and iOS 11.0+ devices. The watch can only be paired with one device at a time. To pair to another device, please disconnect the currently paired device.

Disconnect from the App

Open the Join Fit app. Select “Device” and select the paired device and tap “UNBIND” to disconnect the watch. On iOS devices, you will also need to open the settings menu on your iPhone. Go to Bluetooth settings, tap on the “i” icon on the right side of “AFWG0720″ and then tap ‘Forget This Device’ to finish disconnecting.

Turn On the Screen

To turn on the screen, press the power button or raise your arm if you’re wearing the watch. Press the button again to turn off the screen. Raising your arm too quickly/slowly may not turn the screen on.
Note: You will need to turn on the “Flip over” function on the Join Fit app for the function to work. Pi

Functions On the Home Screen

• Swipe left to go to the data menu (pedometer/heart-rate/sleep monitor). From here, swipe left/right to navigate to different data menu screens.
• Swipe right for the notifications screen.
• Swipe down for the shortcut menu. From here, swipe up to go back to the home screen.
• Swipe up to go to the applications menu. From here, swipe up/down to navigate to the different application menu screens. Press and hold the screen for the watch face selection page. Swipe left/right for different options, then tap the screen again to select.

Note: There are 3 watch faces available.

Functions On Other Screens

• Press the power button to return to the home screen.
• Press the side button to go to the next page and/or confirm the selection.

GPS Functionality

The watch has built-in GPS functionality allowing you to accurately track your distance and other data including altitude and walking/jogging pace.
When a sport mode is selected (see next page), the watch will automatically search for the GPS location and display distance, pace, and altitude data.

Applications

Sports
The watch has 11 sports modes: running, walking, cycling, climbing, treadmill, swimming, yoga, elliptical, basketball, football, and badminton. When an activity has been selected, the watch will display exercise data depending on the mode selected.
When you wish to end or pause the selected activity, press and hold the power button and then tap on the stop/pause icon.

Heart rate
Tap on the heart rate icon to measure your heart rate.
You can also set automated monitoring time intervals on the Join Fit app.

Blood Pressure
Tap on the blood pressure icon to measure your blood pressure.
NOTE: For accurate measurements for both heart rate and blood pressure functions, ensure the following:

• The watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or debris covering it.
• The results and measurements of heart rate and blood pressure data cannot be used for medical reference and should be used as a guide only.

Alarm Clock

Tap on the alarm clock icon to view your alarms. You can set the alarms on the Join Fit app and sync it to your watch.

Music

After your device is connected to the watch, while your device is playing music, tap on the music icon to control music by playing/pausing and switching songs on the watch.

Stopwatch

Tap on the stopwatch icon to enter the stopwatch function. Tap the start icon to start timing; the left icon is a single timing record and the right icon is pause. After pausing, tap on the top single timing record to view the records at different times.

Please read the User Guide
It will help you get the best out of your product.

Still have questions?
Call After Sales Support
1300 886 649
Or visit www.tempo.org

Warranty returns

Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

The product does not work?

If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on  1300 886 649 before returning it to the store for a refund.

Countdown
Tap on the countdown icon and select the desired time. The watch will light up during the countdown time and once the set time is over, the watch will vibrate.

Remote Capture
Tap on the remote capture icon to use the watch as a camera remote for your phone.
When the watch is connected with your phone, open the Join Fit app and select Device > Take Photo. Once Join Fit app is opened on your phone, tap the icon on the watch screen to take a photo with your phone.

Find Phone

After connected with the Join Fit app, tap on “Find Phone” on the watch; your phone will ring. Tap pause to exit.

GPS Location

Tap on the GPS Location icon to view the current latitude and longitude of your current location. If you are inside a building or underground, this function will not work.

Pedometer

Track the number of steps taken, distance walked and calories burnt.

Sleep Monitor
The sleep monitor will display your sleep data. After synchronizing with the Join Fit app, you can view more detailed records on your smartphone.

Settings

Tap on the settings icon to access and change the following settings:

Brightness
Tap on the + or – icons to adjust screen brightness.

Power Off
Select to shut down your watch.

Restore Factory Settings
Restore all settings to the factory state.

About
Display the product name, hardware address, and software version.

Shortcut Menu

Flight Mode
Tap to turn flight mode on/off.

Vibration
Tap to set to vibrate mode.

Do not disturb
Turn on to disable the watch vibrating for incoming calls and messages.

Low Power
Tap to turn on battery saver mode.

Brightness
Adjust display screen brightness.

Settings
Tap to access the settings menu.

Change The Straps

Turn the watch over (see below), push the top needle knob to the right to take off the original strap, then fit the new strap.
Note: only one strap is included with this product.

Specifications

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

Warranty Information

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the
the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 886 649 (Aust) – Fax: (02) 9975 2688
Tempo Help Desk: 1300 886 649 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: info@tempo.org 

info@tempo.org
Model: AFWGPS-0720
Product Code: 202288 07/2020

AFTER SALES SUPPORT
1300 886 649

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>