BAUHN ALPB80-1020 Low Profile TV Wall Mount Installation Guide
- June 7, 2024
- BAUHN
Table of Contents
Low Profile TV
Wall Mount
MODEL: ALPB80-1020
Installation Guide
Welcome
Congratulations on your purchase!
This installation guide tells you all you need to know about using your new
BAUHN® product.
Please take special note of any important safety and usage information
presented with the symbol.
All products brought to you by BAUHN® are manufactured to the highest
standards of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
WARNING
Fixing a TV to a wall mount requires specialist knowledge. We assume no
liability for any injury or material damage incurred due to incorrect assembly
or use. Make sure to follow all instructions and if you require professional
advice, please consult a relevant tradesperson.
NOTE
This wall mount is for indoor home use only.
Unpack and Prepare
What’s in the box
Before setting up your new product, check you have everything:
A. Low Profile TV Wall Mount
B. Installation Pack (see page 6 for information)
C. Installation Guide
D. Warranty Certificate
E. General Safety Warnings
Parts List
Product Overview
- Supports 800 x 400mm max VESA Hole pattern.
- Suitable for TVs sized 42-80″ (106-203cm), weighing up to 65kg.
- Low profile, extending only 30mm (approx.) from the wall.
Installation Pack (Assembly Hardware)
The illustration below shows the contents of the installation pack. These are
the parts that you will need to assemble this wall mount. Some parts are not
shown at the same scale.
Installation
Make sure you read and understand all instructions. Handle and use all materials strictly according to the instructions. If you do not understand these directions or have any questions in relation to the safety of the installation, we recommend you contact a qualified professional.
Installation steps:
- Preparation
- Drilling the holes
- Attaching to the wall
- Attaching the Monitor Brackets to the TV
- Securing the TV
TIP: Installation of the Wall Mount will be easier with two people.
WARNING: Be sure to choose a structurally sound wall area that is strong
enough to hold the weight of the TV as well as the wall mount. Mount the wall
plate far away from any water source and direct sunlight.
WARNING: DO NOT attach the wall mount to a hollow wall or decorative
cardboard.
Tools Required: To complete the following steps you will need:
A. Pencil
B. Phillips head Screwdriver
C. Stud Detector
D. Measuring Tape| E. Hammer
F. Power Drill
G. Masonry Bit (10mm)
H. Drill Bit (6mm)| 
---|---|---
1A .Preparation (for a Brick or Concrete Wall)
Using the wall base plate as a template, mark six holes in locations as shown
above.
NOTE: Ensure that you align the bracket so that the spirit level is flat
and even.
3A.Attaching to the Wall
Hold the wall plate against the wall and align the holes in the plate to the
holes drilled into the wall.
Screw the wall plate to the wall with the self-tapping screws (A): insert them
through the washers (E) into each masonry plug (B) in the wall and then
tighten the screws.
2A.Drilling the holes
On the marked holes, drill holes of 50mm depth into the concrete or brick
wall.
Wedge the masonry plugs (B) into the holes, gently tap each plug with a hammer
until they are flush with the wall as illustrated on the left.
WARNING: Do not drill into mortar joints. Please pay attention to the
electrical lines and also the location of gas and water lines when drilling
holes.
1B.Preparation (for a Wood Stud Wall)
Use a stud detector to locate the center of the framing studs.
Mark six holes in the locations as shown above. Use the wall base plate as a
template.
NOTE: When you are installing the wall mount to a wood stud wall, consult
your builder for advice. The wall must be strong enough for the weight of the
wall mount and the TV.
WARNING: You must spread the wall plate across two studs.
3B. Attaching to the Wall
Hold the wall plate to the wall and align the holes in the plate to the holes
drilled into the wall.
Screw the wall plate to the wall with the self-tapping screws (A), inserting
them through the washers (E).
Make sure the upper and lower raised sections of the plate sit away from the
wall.
2B. Drilling the holes
On the marked holes, drill small diameter pilot holes into the wood stud wall.
WARNING: Please pay attention to the electrical lines and also the
location of gas and water lines when drilling holes.
4.Attaching the Monitor Brackets to the TV
- Lay the TV face down. Check the back of the TV to find the appropriate mounting pattern.
- Select the appropriate bolts (F/G/H/I/J/K) that fit the thread holes at the back of the TV (refer to the TVs manual to determine the correct bolt sizes). Due to the many varieties of TVs, you may need to visit your local hardware supplier to find the correct bolt and washer sizes.
- Position the left and right bracket over the thread holes, ensuring the hooks of the bracket (with the square holes in either side) are towards the top of the TV (see illustration on the right).
- Insert the correct bolts through the flat washers (C), as illustrated on the right. Use the plastic spacers (D) if necessary (check the TV’s back panel).
- Tighten the bolts and ensure the brackets are firmly bolted into place.
- When affixing the monitor brackets, make sure that the sides of the brackets with the hooks are towards the top of the display. Use the holes in the center, ensuring that the mounting holes are at the same level.
5.Securing the TV
- Loosen the bolts on the bracket so that the bracket can sit securely on the wall plate.
- Safely lift the TV and hook the mounting brackets onto the top edge of the wall plate.
- Gently allow the screen to sit against the wall plate.
- Tighten the bolts on the brackets to lock them to the wall plate.
NOTE: At least two people are required to finish this mounting procedure.
Do not attempt to assemble this wall mount independently, as it may result in
incorrect assembly or injury.
Specifications
| VESA Support | Max. |
|---|---|
| Maximum Load | 65kg |
| Distance From Wall | 30mm Approx. |
| Product Weight (including accessories) | 2.4kg |
Compliance and Responsible Disposal
Packaging
The packaging of your product has been selected from environmentally friendly
materials and can usually be recycled. Please ensure these are disposed of
correctly. Plastic wrapping can be a suffocation hazard for babies and young
children, please ensure all packaging materials are out of reach and are
safely disposed of. Please recycle these
materials rather than throwing them away.
Product
At the end of its working life, do not throw this product out with your
household rubbish. An environmentally friendly method of disposal will ensure
that valuable raw aterials can be recycled. Electrical and electronic items
contain materials and substances which, if handled or disposed of incorrectly,
could potentially be hazardous to the environment and human health.
Warranty Information
The product is guaranteed to be free from defects in workmanship and parts for
a period of 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced or
refunded at our discretion, solely at our option with no charge for parts and
labour. The benefits conferred by this warranty are in addition to all rights
and remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be
returned to the supplier for repair. Please be aware that if your product is
capable of retaining user-generated data (such as files stored on a computer
hard drive, telephone numbers stored on a mobile telephone, songs stored on a
portable media player, games saved on a games console or files stored on a USB
memory stick) during the process of repair, some or all of your stored data
may be lost. We recommend you save this data elsewhere prior to sending the
product for repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 886 649 or write to us
at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 886 649 (Aust) – Fax: (02) 8977 3765
Tempo Help Desk: 1300 886 649 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm AEST)
Email: info@tempo.org
Notes
Warranty returns
Should you for any reason need to return this product for a warranty claim,
make sure to include all accessories with the product.
Product does not work?
If you encounter problems with this product, or if it fails to perform to your
expectations, please contact our After Sales Support Centre on 1300 886 649
before returning it to the store for a refund.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>