BAUHN AFWGPS-0721 Fitness Watch with GPS User Guide
- June 7, 2024
- BAUHN
Table of Contents
Fitness Watch with GPS
User Guide
[email protected]
Model: AFWGPS-0721
Product Code: 706049 07/2021
Parts of the watch
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
First Time Use
Charge your watch before using it for the first time. You will need to charge
it for about
Charging steps:
- 1. Place the watch on top of the dock with the charging points on the back of the watch aligned with the charging pins on the charging dock. It will snap into position once correctly aligned.
- Plug the USB charging dock into a USB charging adaptor (not included) or a USB port on your computer.
- Once fully charged (the battery icon is full), unplug the charging dock from the charger.
SMART-
TIME PRO App
Search for the SMART-TIME PRO app in the app store to download, or scan the QR
code below for installation.
For Android For iOs
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc.,
registered in the U.S. and other countries and regions. App Store is a service
mark of Apple Inc.
Turn on the Watch
Once the watch is fully charged, press and hold the power button for 5 seconds
to turn the watch. To turn off the watch, press and hold the power button for
5 seconds.
Connect to the App
Open the SMART-TIME PRO app on your smartphone. Once the app is open, follow
Device > Add device and select the first “AFWG0721” from the list. The watch
will display the below screen:
Tap on to confirm pairing and once the connection is successful, the
Bluetooth® icon will show at the shortcut menu.
The SMART-TIME PRO app supports Android 5.0+ and iOS 11.0+ devices. The watch
can only be paired with one device at a time. To pair to another device,
please disconnect the currently paired device.
Disconnect from the App
Open the SMART-TIME PRO app. Select “Device” and select the unpaired device
and tap “UNBIND”to disconnect the watch. On iOS devices, you will also need to
open the settings menu on your iPhone. Go to Bluetooth settings, tap on the
“i” icon on the right side of “AFWG0721” and then tap ‘Forget This Device’ to
finish disconnecting.
Turn On the Screen
To turn on the screen, press the power button or raise your arm if you’re
wearing the watch. Press the button again to turn off the screen.
Raising your arm too quickly/slowly may not turn the screen on.
Note: You will need to turn on the “Wake screen on wrist raise” function
on the SMART TIME PRO app for the function to work.
Functions On the Home Screen
- Swipe left/right to go to the data menu (heart rate, pedometer, sleep monitor, music player, GPS location, QR code). From here, swipe left/right to navigate to different data menu screens.
- Swipe down for the shortcut menu. From here, swipe up to go back to the home screen.
- Swipe up to go to the applications menu. From here, swipe up/down to navigate to the different application menu screens.
Press and hold the screen for the watch face selection page. Swipe left/right for different options, then tap the screen again to select.
Tap “No Bluetooth connection” to exit when not connected to the app (for “find
phone” and “remote capture”
Note: There are 3 default watch faces available. Please see page 16 of the
“Watch Face” function to select more watch faces from the SMART-TIME PRO app.
Functions On Other Screens
• Press the power button to return to the home screen.
• Press the side button to go to the next page and/or confirm the selection.
GPS Functionality
The watch has built-in GPS functionality allowing you to accurately track your
distance and other data including altitude and walking/jogging pace.
When a sport mode is selected (see next page), the watch will automatically
search for the GPS location and display distance, pace and altitude data.
Select “Skip” to skip the GPS location tracking.
Note: tap “ AGPS-update” to download the auxiliary GPS data when the GPS
signal is weak. GPS function must be turned on
mobile and be connected to the mobile network.
Applications Sports
The watch has 10 sports modes: running, walking, cycling, climbing, treadmill,
yoga, elliptical, basketball, football and badminton. When an activity has
been selected, the watch will display exercise data depending on the mode
selected.
Press the power button and tap on the stop/pause icon when you wish to end or
pause the activity.
Heart Rate
Tap on the heart rate icon to measure your heart rate.
You can also set automated monitoring time intervals on the SMART-TIME PRO
app.
Blood Pressure
Tap on the blood pressure icon to measure your blood pressure.
NOTE: For accurate measurements for both heart rate and blood pressure
functions, ensure the following:
- The watch has good contact with your wrist.
- Check that the sensor is clean and there is no dirt or debris covering it.
The results and measurements of heart rate and blood pressure data cannot be
used for medical reference and should be used as a guide only.
Notification
Tap on the notification icon to view notifications and messages on the watch.
It will display up to 10 messages.
- Allow permission access under “permission settings” + messages under “message push” on the SMART- TIME PRO app.
- Allow permission access to the SMART TIME PRO App on your smartphone.
Weather
Tap on the weather icon to view live weather (up to 3-day forecast). You must
be connected to the SMART-TIME PRO app.
Note: you must have an Internet/mobile connection for this function to work.
Your phone location/GPS must also be turned on.
Alarm Clock
Tap on the alarm clock icon to view your alarms. You can set the alarms on the
SMART-TIME PRO app and sync it to your watch.
Timer
Tap on the timer icon to enter the timer function. Tap +/- to change the time.
Tap the play icon to start timing; Tap the pause icon to pause or stop icon to
stop.
Music
After your device is connected to the watch, while your device is playing
music, swipe right from the home screen to enter the Music control interface
to play/pause/switch songs. Tap the volume + and – icons to control the volume
level.
Note: This feature only works for music, not video playback. Some smartphones
may not support the volume control feature.
Stopwatch
Tap on the stopwatch icon to record time. Tap the icon to start the stopwatch.
Tap the icon to pause. Tap the icon to reset the time record. Swipe right to
exit the interface.
Remote Capture
Tap on the remote capture icon to use the watch as a camera remote for your
phone and the SMART-TIME PRO app is opened.
When the watch is connected to your phone, open the SMART-TIME PRO app and
select Device > Camera. Once the SMART-TIME PRO app is opened on your phone,
go to camera mode and tap the icon on the watch screen to take a photo with
your phone.
Find Phone
After connected with the SMART-TIME PRO app, tap on “Find Phone” on the watch;
your phone will ring. Tap pause to exit.
GPS Location
Swipe right from the home screen to view the current latitude and longitude of
your current location. If you are inside a building or underground, this
function will not work. Tap the play icon to start location.
Activity
Track the number of steps taken, distance walked, and calories burnt.
Sleep Monitor
Swipe right from the home screen to view the sleep monitor data. After
synchronizing with the SMART-TIME PRO app, you can
view more detailed records on your smartphone.
Settings
Tap on the Settings icon to access and change the following settings:
Brightness
Tap on the + or – icons to adjust the screen brightness.
Language
Set the language.
Power Off
Select to shut down your watch.
Factory Reset
Restore all settings to the factory state.
About
Display the product name, hardware address, and software version.
Shortcut Menu
Vibration
Tap to turn vibration on/off.
Low Power
Tap to turn on battery saver mode.
Brightness
Adjust display screen brightness.
Settings
Tap to access the settings menu.
.Change The Straps
Turn the watch over, push the top needle knob to the right to take off the
original strap, then fit the new strap.
Note: only one strap is included with this product.
Watch Face
Select “Watch Face” on the SMART-TIME PRO app and select your desired watch
face. It will automatically update on the watch with the new watch face.
Specifications
| Display | 1.3”, 240 x 240 pixels |
|---|---|
| Ingress protection | IP67 |
| Charging time | 3.5 hrs (approx.) |
| Charging base input Bluetooth Range | 5VDC, 200mA |
| Bluetooth Range | < 10m |
| Built-In Battery | Li-ion 3.7V 360mAh |
| Weight | 42g |
| Dimensions (mm) | 48.5(W) x 57(H) x 16.5(D) |
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.
Warranty Information
The product is guaranteed to be free from defects in workmanship and parts for
a period of 12 months for the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced, or
refunded at our discretion, solely at our option with no charge for parts and
labor. The benefits conferred by this warranty are in addition to all rights
and remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and to compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be
returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated
data (such as files stored on a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable media player, games saved on
a games console, or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost. We recommend you save
this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 002 534 or write to us
at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO Box 6056, Frenchs Forest, NSW 2086,
Australia Telephone: 1300 002 534 (Aust) – Fax: (02) 9975 2688 Tempo Help
Desk: 1300 002 534 (Aust) (Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm
EST)
Email: [email protected]
Warranty returns
Should you for any reason need to return this product for a warranty claim,
make sure to include all accessories with the product.
The product does not work?
If you encounter problems with this product, or if it fails to perform to your
expectations, make sure to contact our After Sales Support Centre on 1300 002
534 before returning it to the store for a refund.