GORDON SINCLAIR G30 Bluetooth Speaker User Manual
- June 3, 2024
- GORDON SINCLAIR
Table of Contents
GORDON SINCLAIR G30 Bluetooth Speaker
Dear customer,
Thank you for purchasing the outdoor Bluetooth speaker G30. To ensure correct
operation, please read this user manual carefully before operation.
Important Safety Instructions
- Do not use the speaker in special cold and hot environments.
- Please avoid the speaker dropping or hitting with a hard object, it may cause other hardware damage.
- Take care when charging the speaker, excessive prolonged charging will damage the battery lifetime. Charge the speaker to full capacity when using for the first time.
- When the battery is low, the indicator light will flash and voice prompt “battery low”, please charge speaker in time.
- It does not use this speaker for a long time, please charge at least once within onemonth, in order to prevent the lithium battery from causing and damaging because of excessive consumption.
- Adjust the volume to the appropriate level to avoid disturbing others.
Features
- Bluetooth Music Bluetooth 5.0 stereo music playing
- USB Music playing At MP3/WAV music format
- Water-resistance at IPX4
- Voice guide The speaker will prompt the working mode and status for easy operation.
Technical Data
- Driver: 43mm Driver 1 + Passive radiator 1
- Bluetooth Version: JLAC6925B BLUETOOTH 5.0
- Output： 5W
- Built-in Battery: 2000mAh
- Size: 9849.175.2mm
- Playing Time: 8 hours at 50% volume
- Net Weight: 190g
Package Contents
- Bluetooth Speaker, TYPE-C Cable, User Manual
Slot and Keys
Power On&Off / Mode Switching
Play / Pause
Next Track / Volume +
Previous Track / Volume –
Charging slot USB Slot
Operation Instructions
Power on/off
Long press button: Power on/off the speaker
Long press button: Switch the working mode for Bluetooth mode, and USB
music playing mode.
(The default working mode is Bluetooth mode.)
Bluetooth
-
Short press the button to switch Bluetooth working mode.
-
Turn on the Bluetooth of your phone, and search for nearby devices. The G30 will be found on your mobile pairing list, please connect it. When connected, the speaker will prompt
“Device paired” and the LED indicator will stop twinkling in blue. -
Please turn on your phone’s music player, and the speaker will play the selected music.
-
The speaker will pair with the latest used Bluetooth device automatically. Long press the button to disconnect the current Bluetooth connection. The speaker will prompt “Device disconnected”. The other Bluetooth devices can find and pair with the speaker.
TWS(True Wireless Stereo) function (only works in Bluetooth mode)
- Power on 2pcs G30(ensure both speakers are in Bluetooth waiting to pair status).
- Press and hold the + button and – button for 3 seconds to sync on either one speaker can turn on/turn off the TWS function.
- Once two speakers are paired, the speaker button light indicator flashing in blue is the master speaker,the other one button light off is the slave speaker. Under the TWS mode, all the keys of the master speaker can be operated, except for the mode key of the slave speaker, all the other keys can be operated.
- Use your phone to pair the master speaker G30, and play Bluetooth music on both speakers.
- Press and hold the + button and – button for 8 seconds to sync to clear the TWS pairing memory.
Note:
- Two speakers for True Wireless Stereo connection, and should be waiting for Bluetooth pair.
- Under TWS mode， if you turn off one of the speakers， then another speaker will be turned off automatically.
- The two speakers will be reconnected automatically after the first connection once in connection range （except for clearing the TWS pairing memory）
USB Music Playing
Insert the USB Flash Disk into the speaker, short press the button to enter
the USB mode, the speaker will prompt “USB mode”, Then the speaker will play
the USB music directly.
Please Note: The USB Flash Disk supports memory up to 32G, and supports
the audio format at MP3, and WAV.
Button functions in Bluetooth/USB mode:
Intelligent power-saving function
The speaker will be automatically powered off in below cases:
- Under Bluetooth mode, the speaker is waiting to pair for more than 10 minutes.
- Under USB mode, press the button to pause/mute for more than 10 minutes.
Note: Pleaselongpress buttonagaintopoweronthespeaker
Charging
When the speaker with low battery capacity, the speaker will prompt “battery
low”, please charge the battery via a USB adaptor immediately. During
charging, the led indicator will remain orange. When fully charged, the led
indicator will be off.
Note: Please use a good-quality adaptor to charge the speaker.
We suggest use the adaptor specification at 5V/1A When speaker with low battery capacity, please charge the speaker immediately The speaker can be charged by different charging current, if using the computer to charge the speaker, as the current only at 500 mA, the charging time will be very long.
Troubleshooting
What should I do if the speaker can not pair with the Bluetooth device and play music accordingly?
- Please check the specification/manual of the Bluetooth device (your mobile or computer), and check if the device can support the A2DP stereo audio transmission. If yes, please turn on the A2DP stereo mode.
- Ensure the speaker is under the Bluetooth pairing status, if there are many Bluetooth devices nearby, the G30 will not easy to be found. Please turn off other Bluetooth devices.
- What should I do if the speaker get stuck and all the button can network?
The speaker’s inner system may be wrong with some inappropriate operation. Please try to long press the button and hold for 8 seconds to reset the speaker’s software.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. RF Exposure Information The device has been evaluated to
meet general RF exposure requirement. This equipment should be installed and
operated with minimum distance 0mm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>