Smart-Hit Booster M2 massage gun User Guide

June 7, 2024
Smart-Hit

Smart-Hit Booster M2 massage gun - logo
Smart-Hit Booster M2 massage gun - logo 2 QUICK START GUIDE
Smart-Hit Booster M2 massage gun -
SUZHOU PI FITNESS TECHNOLOGY CO., LTD.
www.boluojun.net
Smart-Hit Booster M2 massage gun - logo 3

Thank you for choosing our booster massage gun. Before using it, please read this manual carefully to ensure proper operation and keep this manual
for future reference.

PRECAUTIONS
To avoid harm, fault, electric shock, fire, death, and other equipment damage, please read the instructions and warnings carefully.

Main functions:

Relieving muscle soreness, stimulating the circulation of blood, relieving stiffness of cervical vertebra, and improving muscle recovery.

PRECAUTIONS
To avoid harm, fault, electric shock, fire, death, and other equipment damage, please read the instructions and warnings carefully.
PROHIBITION

  1. Minors are forbidden to use this product. It is not a toy.
  2. Forbid to put this product into water. If it falls into the water accidentally, please send it for inspection in time.
  3. Forbid to put this product near or into the fire.
  4. Forbid to use it on head, neck, heart, or genital.
  5. Forbid to use it on bones. Use it on soft tissues only when not feeling pain or discomfort.
  6.  Forbid to use the non-original charger to charge the product, otherwise, it may cause a fire.
  7. Forbid to drop the product intentionally.
  8. Forbid to remove the screws or try to disassemble the product.
  9. The product is not an alternative or complement to medical treatment. If you are feeling pain, undergoing medical treatment, or using any other medical devices, please consult your doctor before using this product.
  10.  Forbid to put fingers, hair, or other body parts near to the back of the massage heads in case of squashing.

| Do not touch this part when the machine is running without
the massage heads being installed.
---|---
| Do not touch this part when the machine is running with the
massage heads installed.

DISCLAIMER
If you have any of the following situations or any health-related problems, please consult your doctor before using this product.

  1. Pregnancy, diabetes, mental disorder, retinal damage, and other complications.
  2.  Pacemaker usage, recent surgery, epilepsy, migraine, lumbar disc protrusion, and spondylolisthesis.
  3. Recent joint replacement surgery, Intrauterine contraceptive device placing surgery, metal parts implantation, or other concerns about your own body.

Ongoing research on the effect of vibration training toward specific medical diseases may reduce the number of contraindications.  Practical experience shows that, in many cases, vibration-training-combined treatment is also effective medical guidance. However, it must be done with a doctor’s advice.

PRODUCT INTRODUCTION

Smart-Hit Booster M2 massage gun - PRODUCT
INTRODUCTION
MASSAGE HEADS
Smart-Hit Booster M2 massage gun - MASSAGE HEADS

INSTRUCTION FOR USE

Smart-Hit Booster M2 massage gun - INSTRUCTION FOR USE

MULTI-FUNCTION BUTTON USE
a. Switch the power on the key to ON, and the device is on. b. A long press of a multifunction button for 2 seconds to switch mode  (standard mode / automatic mode):

  1. Under the standard model: short press the adjustment gear briefly, and each time you press it, add a gear. The last one is AI  intelligent vibration mode.
  2. Under the auto mode: short press to adjust the vibration mode, and switch one mode every time you press. Four modes are adjustable  (fade-out vibration, crescendo vibration, wave vibration).

CHARGING
The charging port is on the bottom of the massage gun handle

  •  Please fully charge the battery for the first use.
  • Turn it off when charging.
  •  Connect the power supply. Charging indicators will flash in turn and it shows that the machine is charging.
  •  When the power display turns to 100%, it means that the battery is full.
  •  Do not move the machine when it is charging.

BATTERY REMOVALSmart-Hit Booster M2 massage gun - BATTERY
REMOVAL
Turn off the machine before removing the battery.

  • Push the battery removal switch to the nose with one hand and hold it.
  • Hold the handle with the other hand and slowly pull out the battery downward.

SPECIFICATIONS

Product name: Muscle massage gun Rated speed:900-3200rpm
Type: M2-A Stroke:12mm
Rated input:100-240V~50/60Hz Maximum power:135W
Rated output: DC,24V      1A Net weight:1.1kg
Battery capacity:2000/2500mAh Size:285×217×64mm

FAQ

UNABLE  TO POWER  ON
Low temperature:

Keeping the massage gun below 0℃ for a long time will reduce the activity of the battery and prevent normal functioning. The product cannot work normally while being power on.
Solutions: Lay the product for two hours at a temperature above 0℃, or raise the machine temperature fast with a hair-drier.
Low battery:
When the battery is low, or user does not charge it for a long time, the battery will enter the low battery protection mode. The product will not work normally at this time when you start it again.
Solutions: Turn it off with charger connected. Make sure it is fully charged, and it can run normally.

TROUBLESHOOTING


Slight abnormal noise during use| Slight noise is a normal phenomenon in the period of a new machine. If the noise gets louder after a period of use, please send it for inspection.
The battery does not charge| Replace the battery please, for the aging or poor contact of the battery.

MAINTENANCE

  • When you do not use the product for a long time, turn it off and hold electricity while safe-keeping it. Store it in a safe, cool, and dry place.
  • Charge the product every half a year if you do not use it for a long time. Holding electricity prevents battery damage due to stains.
  • Please choose the neutral detergent and a soft cloth for daily maintenance. Do not use engine oil, organic solvents, or other chemicals for cleaning.
  • Please turn off the power after using the product, or before cleaning the product.
  •  The product should be well fixed during transportation. Avoid violent vibration, collision, rolling, and falling.

ENVIRONMENTAL PROTECTION

Do not discard this product with general household waste at the end of its service life. Put this product in the recycle bin designated by the government or send this product back to the manufacturer’s after-sales service center. The service center staff will recycle it in an environmental-friendly manner.
Name and content of harmful substances in the product

Part name Poisonous and harmful substances and elements
Pb Hg
Shell 0
Circuit board x
Metal parts x
Rubber parts 0
Adapter x
Connecters 0
Handle cover 0

This form is based on the rules of SJ/T 11364.
O: The content of harmful substances in all parts meets the limited requirements of GB/T 26572.
X: The content of harmful substances in at least one part exceeds the limitation of GB/T 26572.
Environmental protection use period
The time limit of environmental pollution, serious damage to people and property, or the leakage of toxic and harmful substances is 10 years in normal use as described in this manual.
This sign indicates that the environmental protection period of this product is 10 years in normal use. Some components may also have environmental protection period signs. The specific period of environmental protection for each component shall be subject to its own sign.

WARRANTY

The warranty period of this product is 18 months, and the authority is not transferable. From the date of purchase, you enjoy free warranty within the warranty period with valid documents. (Outward appearance is not covered.)
Disclaimer:

  1. Accidental damage, improper use or transportation;
  2.  Improper maintenance;
  3.  Operation without following the manual instructions;
  4.  Unable to provide formal purchase certificate;

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals