OKPRO S-5050GC 3000W Heavy Solar Street Lights User Manual
- June 14, 2024
- OKPRO
Table of Contents
OKPRO S-5050GC 3000W Heavy Solar Street Lights User Manual
THE CONTENTS OF THE PACKAGE
Please read these instructions carefully
-
When using the light for the first time after installation, please use the remote control and press ‘AUTO.!
-
If you press ‘ON’ or “OFF,’ please press ‘AUTO’ again. If ‘ON’ is forced on, the light will not automatically turn off. If ‘OFF” is forced off, the light will not automatically turn on at night.
-
if you need to set the timer, please use the remote control to set it at night when the light is on (The street light has a memory program, just set it once).
-
Please pay attention to the concave and convex position of the solar panel and the light’s connection cable, which should be connected in the correct position. If the connection is reversed, it cannot be charged.
-
Assemble the solar panel brackets with small bolts (Fix the single hole position first).
-
Install brackets to the solar panel with two bolts against each other:
-
Two installed single-hole location of the solar panels are placed neatly, with two holes against each other.
-
With small U-shaped accessories, the two solar panels fixed together.
-
Light pole and large U-shaped fittings are attached with large bolts.
-
Fix U-bracket with small bolt:
Position 1in the figure has three holes, and the middle hole must be fixed.
There is a hole at position 2 in the figure.
You need to adjust the angle to fix in the best position (Choose the best angle for daylight exposure).
-
Loosen the bolt on the lamp.
-
Put the connection wire of the lamp through the hole of the light pole. Lock the light tightly to the light pole.
-
Plug in the cable and tighten the power cord.
Please pay attention to the concave and convex position of the solar panel and the light’s connection cable, which should be connected in the correct position. If the connection is reversed, it cannot be charged.
RECOMMENDED INSTALLATION HEIGHT
The higher the solar street light is installed, the lower the lighting
brightness of the ground, but the greater the lighting range. The recommended
installation height is 26-32 feet.
REMOTE CONTROL BUTTONS
ON: Turn on the lights (Lights can be turned on during the day and will not turn off automatically.)
OFF: Turn off the light (Lights will not be automatically turned on at dusk the next day.)
+ :Increase brightness
– :Decrease brightness
:100% brightness
:50% brightness
AUTO : Automatic mode (Lights automatically turn off at dawn and turn on at dusk.)
3H\ 5H \ 8H : Timer mode
(Lights on 3H \ 5H \8H, then automatically turn off the lights.)
AUTO MODE
AFTER SALES SERVICE
If you encounter any problems with the product, please scan the code to fill
out the registration form. We will respond to you within 48 hours.
OKPRO CUSTOMER SERVICE
Phone:+1833 872 6581
Email: support@okprolights.com