YPHIX 50298100 50298101 50298102 50298103 Grondspot Alexis Installation Guide
- June 7, 2024
- YPHIX
Table of Contents
Installation Manual
50298100 50298101 50298102 50298103
OUTLINE DIMENSION
|
BOM
---|---
Unit: mm
|
Note: The drawing showed a general introduction to this description.
When the discrepancy between the actual product and drawing, please all to the
actual products.
Features
- The standard color temperature of warm white is in the range of 2700-3200K.
- The standard input voltage is 220-240M.
- Men installation, always work with a technician or install by a technician.
- The main material of this product is aluminum, surface coating is only suitable for the natural environment, don’t install this product near the seawater or in the environment which is high salty or high acid.
- This is an IP67grade product, don’t put fixtures into water.
- Applicable environment temperature: -20r<fixture040r
Installation
| Install the
mounting sleeves on the ground, the top side should be on the same level as
the ground surface, power cables need to go through the mounting sleeve.
---|---
| Connect the power
cable with the lighting fixture.
keep enough length for maintain
| Fix the lighting
fixture with the mounting sleeve by a screwdriver.
Note: The thickness of the gravel must ticker than 25cm.
Wiring Diagram
3.1: High voltage single color fitting: refer to the following recommended wiring method. Example of wiring:
Specifications
4.1. Material specifications:
Housing: | 12 Die-casting black powder-coated aluminum.T=60-80um. |
---|
Adhesion of ISO class 1/ASTM class 4B.
Gasket:| Gasket: Tooling shaped seal
Glass:| Tempered glass. T=6mm
Cable gland:| IP-68 PG-9
Gasket:| Tooling shaped seal
Power cable:| H05RN-F 3×0.5mm L=2m(high viltage)
4.2. Electrical parameters:
Item No. | Light source | Input voltage(v) | IK rate |
---|---|---|---|
D2FU0110 | GU10 | 220-240V | 04 |
YPHIX
Keizer Karelplein 32
6511 NH Nijmegen
The Netherlands