Shelly VINTAGE User Guide
- June 7, 2024
- Shelly
Table of Contents
- Shelly VINTAGE User Guide
- SHELLY VINTAGE А60/А19 ST64/ST21 G125/G40
- Specification
- Technical Information
- Introduction to Shelly
- Installation Instructions
- Declaration of conformity
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shelly VINTAGE User Guide
SHELLY VINTAGE А60/А19 ST64/ST21 G125/G40
This document contains important technical and safety infor- mation about the
device and its safety use and installation. Before beginning the installation,
please read this guide and any other documents accompanying the device
carefully and completely. Failure to follow the installation procedures could
lead to malfunction, danger to your health and life, violation of the law or
refusal of legal and/or commercial guarantee (if any). Allterco Robotics is
not responsible for any loss or damage in case of incorrect installation or
improper operation of this de- vice due to failure of following the user and
safety instructions in this guide.
The Shelly WiFi Dimming Bulb model A60/A19, ST64/ST21, G125/G40 by Allterco
Robotics is intended to be installed into a standard light socket E27/E26 in
order to dim the light. Shelly may work as a standalone device or as an
accessory to a home automation controller.
Specification
| A60/A19 | ST64/ST21 | G125/G40 | |
|---|---|---|---|
| Power supply | AC 220-240V/AC 110-130 | ||
| Socket | E27/E26 | ||
| Power Rating | 7 W | 4 W | |
| Brightness | 750 lm | 260 lm | |
| Color Temperature | 2700K | ||
| Color Index | Ra>80 | ||
| Working temperature | From -10°C to 40°C | ||
| Complies with EU standards | RED 2014/53/EU, LVD 2014/35/EU, EMC 2014/30/EU, |
RoHS2 2011/65/EU
Radio signal power| 1mW
Radio protocol| WiFi 802.11 b/g/n
Frequency| 2412-2472 МHz; (Max. 2483,5 MHz)
RF output power| 13.74 dBm
Operational range (depending on local construction)| up to 50 m outdoors, up
to 30 m indoors
Dimensions| 60×115 mm| 64×160 mm| 125×155 mm
Electrical consumption| < 1 W
Protection class| IP20
Life Time| 15,000 hours
Equal Incan| 60W| 40W
Filament| Straight| Spiral
Glass/Coating| Clear| Amber
Technical Information
- Control through WiFi from a mobile phone, tablet, PC, auto- mation system or any other device supporting HTTP and/or UDP protocol
- Microprocessor management
- Controlled elements: multiple LED diods
- Shelly may be controlled by an external switch
⚠ CAUTION! Danger of electrocution. Plugging the device to the power grid
has to be performed with caution.
⚠ CAUTION! Do not allow children to play with the device. Keep the
devices for remote control of Shelly (mobile phones, tablets, PCs)
away from children.
⚠ CAUTION! Please handle with care! The Shelly Vintage is FRAGILE!
Introduction to Shelly
Shelly® is a family of innovative devices, which allow remote control of electric appliances through mobile phone, PC or home automation system. Shelly® uses WiFi to connect to the devices controlling it. They can be in the same WiFi network or they can use remote access (through the internet). Shelly® may work standalone, without being managed by a home automa- tion controller, in the local WiFi network, as well as through a cloud service, from everywhere the User has Internet access. Shelly® has an integrated web server, through which the User may adjust, control and monitor the Device. Shelly® has two WiFi modes – Access Point (AP) and Client Mode (CM). To op- erate in Client Mode, a WiFi router must be located within the range of the device. Shelly® devices can communicate directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly® de- vices may be available for monitor and control even if the User is outside the range of the local WiFi network, as long as the WiFi router is connected to the Internet. The Shelly Cloud function could be used, which is activated through the web server of the Device or through the settings in the Shelly Cloud mobile application. The User can register and access the Shelly Cloud, using either Android or iOS mo- bile applications, or any internet browser and the web site: https://my.shelly.cloud/.
Installation Instructions
⚠ CAUTION! Danger of electrocution. Before installing the De- vice into
the light socket please check if it has been powered off.
⚠ CAUTION! Use the Device only with power grid which com- ply with
all applicable regulations. Short circuit in the power grid connected to the
Device may damage the Device.
⚠ CAUTION! Please check the working voltage of the device and the
supplied voltage of your power grid before installing the device!
Installing the device to a non recommended power sup- ply may lead to
malfunction, danger to your life or violation of the law. Allterco Robotics is
not responsible for any loss or damage in case of incorrect installation or
operation of this device.
⚠ RECOMMENDATION! The Device may be connected to and may control
electric circuits and light sockets only if they comply with the respective
standards and safety norms.
Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio equip- ment type Shelly
Vintage A60/A19, ST64/ST21, G125/G40 is in compliance with Directive
2014/53/EU, 2014/35/EU, 2014/30/ EU, 2011/65/UE. The full text of the EU
declaration of conformi- ty is available at the following internet address
https://shelly.cloud/knowledge-base/devices/shelly-vintage/ Manufacturer:
Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: [email protected] Web:
http://www.shelly.cloud
Changes in the contact data are published by the Manufacturer at the official
website of the Device
http://www.shelly.cloud
All rights to trademarks She® and Shelly® , and other intellectual rights
associated with this Device belong to Allterco Robotics EOOD