Trident AI (V2.0) User Manual

: June 7, 2024
: Trident

Table of Contents

**QUICK START
PRODUCT SPEC
Trident User Manual Reference
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

TrIdent AI
(V2.0)
J.BC.0205.0150

$Trident AI $V2.0$ -$

**QUICK START

$Trident AI $V2.0$ -QUICK START$
Trident Features:**

Advanced DSP, Sony 1/2.8 inch 8.42-megapixel sensor and high-quality 12-megapixel lens, Ultra high definition output,
USB2.0 YUY2/NV12/MJPG/H.264/H.265 video format works with Windows, macOS, Android, Linux OS.
Type-C port output.
120°FOV
Lens distortion rate less than 2%
Support WDR, 3DNR, Anti-flicker

Trident User Manual Reference
• Standard UVC protocol, compatible with most UCC platforms
• The low noise CMOS enables an ultra-high signal-to-noise ratio in the camera’s video output and allows for a clear and sharp image.
• Autoframe participants dynamically as they enter or exit the camera frame or change positions; Autoframing is selectable via remote, or desktop control.
• Backlight compensation to compensate for bright light sources, eliminating unnatural shadows and “light blooming”.
• Preset camera positions available when using manual mode.
• High Definition Audio with 16K pickup and 24K playback makes for a crystal clear connection. Utilizing the latest techniques in spatial audio mapping and sampling, the background noise is eliminated even in a noisy environment, it can make the voice sound clear. With 360° Omni-directional microphones, range is up to 5 meters.
Full Duplex capability.
384ms Acoustic Echo Cancelation (AEC)
Automatic Noise Suppression (ANS)
Automatic Gain Control (AGC)
The peak-limiting algorithm eliminates even momentary distortion.

PRODUCT SPEC

Model	Trident
Sensor	1/2.8 inch, high quality, 8.42-megapixel SONY

CMOS sensor
Video
Format| USB2.0| YUY2, NV12:
1280720@15;
1024576@20;
640*480@30

Trident User Manual Reference

| | MJPG:
3840’2160@30; 25601440@30; 1920–1080@30; 1280720@30; 1024576@30; 640*480@30 ---|---|--- 11.264, H.265: 3840’2160@20; 2560*1440@30; 19201080@30; 1280720@30; 1024`576©30; 640480@30
RJ45| Only for power (POE)
Digital Zoom| 4X
Field of View| 120°
Sensor Resolution| 8.42 megapixel
Control Port| USB2.0 (UVC/UAC)
Video Port| Type-C (USB2.0)
SM Ratio| >50dB
Focal Length| f=2.20mm
Minimum Lux.| 0.1 lux
White Balance| Auto/Manual
Iris| F 2.2
Anti-Flicker| 50HZ/60HZ/OFF
WDR| Supported
Edge Enhancement| Supported
Digital Noise Reduction| 2D&3D
Image Rip| Supported
Electronic Pan/Tilt| Supported
Auto frame| Supported
Backlight Compensation| Supported
Ideal Microphone range| 3-5 meters
USB Audio| Supported
Microphone| Omnidirectional microphone(100-16KHz)
Sensitivity| -26±2dB RL=2.2K0 Vs=2.0V
Input Voltage| DC port
Speaker| 40/8W 100-24KHz 2inch Anti-magnetic speaker

Trident User Manual Reference

POE	Supports IEEE802.3af
Dimension (L × W × H )	395mm×113mm×112mm/15.5”x4.5”x4.4”
Net Weight	1 kg/2.2 lbs.

$Trident AI $V2.0$ -Trident User Manual Reference$

1. Speaker
2. Camera lens
3. Status indicator light
4. Multi-array microphone
5. DC12V power interface
6. RJ45 interface (POE)| 7. Type-C (USB2.0) interface
8. Dip switch for firmware upgrades
9. Adjustable spindle
10. Rotatable bracket
11. Kensington® type slot
---|---

Trident User Manual Reference

$Trident AI $V2.0$ -Trident User$

INSTALLATION MODES:

$Trident AI $V2.0$ -INSTALLATION MODES$

Trident User Manual Reference

REMOTE CONTROL:
LED indicator:
The remote control is unique in that a single control can operate up to three cameras.
Camera 1 operation is standard, and the LED will flash red when the commands are being sent to camera 1
Camera 2 operation is indicated by a green LED
Camera 3 operation shows as a blue LED

$Trident AI $V2.0$ -REMOTE CONTROL$

CAM1/CAM2/CAM3: A quick press of the colored key is all that is needed to select the camera.

Zoom adjustment key: +/- Adjusts the electronic zoom, only available when manual control is selected over automatic framing.
Power key: Standby/start camera.
BLC: Set backlight compensation ON or OFF.
Navigation key: up, down, left and right In manual control mode, use to adjust the position of electronic pan or tilt. Also used to navigate the on-screen menu.

Confirm/Home key: In manual control mode, a quick press will return the image to the home position. When using the menu, it is used to confirm the menu options.

Menu key: In manual control mode, a quick press to enter/exit the menu.

$Trident AI $V2.0$ -manual control mode$

Volume control key:

A quick press will incrementally increase or decrease the volume output of the

Trident. Note- volume control of the PC or device connected is not influenced by this selection.

**Video Mute/Micro Mute:

**

Video Mute and micro mute.

A/M: Auto frame/Manual frame.

PUSH Frame:

In Auto frame off mode, you can manually trigger the Auto frame once.

Preset key:

Long press for 3 seconds to save the current position to the corresponding preset position, shortly press to call the preset position, only available when Auto frame is closed.

Trident User Manual Reference

Mirror/Flip: Used to change mage orientation.
Reset: Press and hold for 3 seconds to reset the camera parameters to the factory settings.

Digital key mapping:
As shown in the figure on the right, in non-menu mode, this part of the keypad is used for the function identified on the key; while in menu mode, this part of the keypad is used as numeric keys.

On-Screen Display (OSD) menu

In normal mode, press the menu button on the RF remote, to enter the OSD menu; press the menu button again to exit and save modified parameters.
$Trident AI $V2.0$ -OSD$
Use the navigation button to select the main menu. As seen above, the main menu will change to a gray background, and the right column will show all parameters under the selected sub-menu.
After entering the main menu, press the up/down navigation buttons to select the desired submenu, then use the left/right navigation button to set the parameter.
To return to the upper-level menu, select the “return” and then press the left or right navigation button to return to the previous menu.
$Trident AI $V2.0$ -menu button2$
Press the OSD button once again. to exit the menu.
Trident User Manual Reference
OSD Menu Layout:

SYSTEM| LANGUAGE| ENGLISH/CHINESE|
---|---|---|---
PROTOCOL| Optional item: VISCA| Default: VISCA
ADDRESS| VISCA:1-7| Default: 1
BAUDRATE| 2400.4800.9600.115200 optional| Default: 9600
RETURN| Back to the main menu|
EXPOSURE| EXP.MODE| AUTO/MANU| Default: AUTO
---|---|---|---
SHUTTER| Shutter speed:1/30-1/10000, only valid under MANU mode| Default: 1/100
GAIN| Gain setting:0-15, only valid under MANU mode| Default: 0
FLICK| OFF/50HZ/60HZ| Default: 50HZ
BACKLIGHT| ON/OFF| Default: OFF
GAMMA| 0-15| Default: 8
RETURN| Back to the main menu|
IMAGE| WS MODE| Al ITO/MANti| Default. AUTO
---|---|---|---
B GAIN| Blue again Ievel:0-256. only valid under| Default: 100
R GAIN| Red qain leve1:0-256. only valid under| Default: 100
DEFOG| Set the image Permeability: OFF/1-15| Default: OFF
RETURN| Back to the main menu|
QUALITY| 2D NR| Set 2D noise reduction level: ON/OFF| Default: OFF
---|---|---|---
3D NR| Set 3D noise reduction| Default: AUTO
SHARPNESS| Sharpness setting:0-15| Default: 8
CONTRAST| Contrast setting:0-15| Default: 8
SATURATION| Saturation setting:0-15| Default: 8
BRIGHT| Bright setting:0-15| Default: B
RETURN| Back to the main menu|
CTRL| MIRROR| Turn the screen left and right ON/OFF| Default: OFF
---|---|---|---
FLIP| Picture up and down ON/OFF| Default: OFF
AUTO FRAME| AUTO/MANU| Default: AUTO
RETURN| Back to the main menu|
RESET| | CAM RESET Reset camera parameter to default
---|---|---
| RETURN Back to the main menu
INFO| CTRL VER| Camera movement control program version
---|---|---
CTRL DATE| Release date of camera movement control program
RETURN| Back to the main menu