MultiClean™ Allergen Pet Lift-Off® & Non Lift-Off Filters/Tank | Support
- June 7, 2024
- Bissell
Table of Contents
Have you checked for suction at the end of the Hose?
No > You’ll want to follow the complete list of steps before continuing > Go to No Suction
Yes > Remove & empty Dirt Tank
-
Release the Separator by twisting to the left to disconnect & remove
-
Remove all Filters
-
Open the Tank Lid > Lift the release latch on the front
- Remove Filters > Reattach Tank Lid
-
Remove Post-Motor Filter – Located below the Dirt Tank
- Press down on tab to remove Filter Cover
- Press tab on right side of Filter > Remove Filter
-
Reattach Dirt Tank to machine (without Separator and Filters)
- NOTE: This is for testing purposes only (machine should not be used without all Filters installed)
-
Turn on > Check for suction at the end of the Hose
- Is there suction?
- Yes > Go to Cleaning Filters
- No > Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>