SMSL

SMSL M7 HiFi 2xAK4452 DSD512 USB DAC 32Bit/768KHz Headphone Amplifier

Specifications

• BRAND: SMSL
• CONNECTIVITY TECHNOLOGY: USB
• HEADPHONES JACK: RCA
• ITEM WEIGHT: 911 Grams
• PACKAGE TYPE: Standard Packaging
• INPUT JACKS: USB/optical/coaxial
• OUTPUT JACKS: 6.35mm Headphone jack/RCA
• THD +N: Pre-output0.00068%
• HP OUTPUT: 0.0036%
• SNR: Pre-output 107dB
• HP OUTPUT: 107dB
• DYNAMIC RANGE: 116dB
• USB TRANSMISSION: Asynchronous
• USB: Windows7/8/8.1/10;Mac OSX10.6
• USB BIT DEPTH: 16bit,24bit,32bit,1bit
• USB: DSD 2.8224/5.6448/11.2896/22.5792 MHz
• USB: PCM 44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
• OPTICAL/COAXIAL SAMPLING RATE: 44.1/48/88.2/96/176.4/192 kHz
• HEADPHONE AMPLIFIER OUTPUT POWER:
  • 138mW（32ohm,THD=0.1%）
  • 110mW（64ohm,THD=0.1%）
  • 58mW（150ohm,THD=0.1%）30mW（300ohm,THD=0.1%）
• RCA OUTPUT LEVEL: 4Vrms
• POWER CONSUMPTION: 4.3W
• STANDBY POWER: 0.9W
• PRODUCT SIZE: 1888451mm
• NET WEIGHT: 911g

Introduction

AKM company’s two AK4452 pieces are utilized as DAC chips for improved channel separation and less distortion. using the TPA6120A2 HP amp chip, which has a high power and extremely low distortion. Extreme transient response and high voltage swing. Digital filters, sound styles, and humanized operation can all be customized. using a separate clock system with extremely low jitter and an audio clock with extremely low phase noise.

HOW TO SELECT A DAC

You must think about the output power and headphones you want to drive if you want a built-in DAC/Amp. It could be preferable to use a lower-powered, quieter amplifier if all you want to do is power ultra-efficient IEMs.

HOW DAC IMPROVES QUALITY

A DAC processes dozens or even millions of bits per second, so mistakes might occasionally occur and signals may not be accurately represented. A more accurate listening experience will result from the ability of higher quality DACs to handle more data more quickly and with fewer errors.

HOW TO KNOW IF DAC IS GOOD

A quality DAC will make every effort to reduce these problems and present the music as faithfully as it can. Because the internal components are constructed and calibrated differently, different DACs produce distinct tones. We appreciate it when audio equipment asserts itself, so this is definitely a good thing.

HOW TO BREAK INTO DAC

For at least three weeks, keep it connected in and powered “on.” For as many of the three weeks when it is “on time,” play music through it. You can then switch it on and off as you like after that. For the record, I prefer to keep my DAC powered on at all times, even when no music is being played.

HOW TO MATCH HEADPHONES TO AMP

A match does not mean “equal,” it implies “complementary.” It should work well to pair headphones with impedances that are 2.5–8 times higher than the impedance of the source. This suggested ratio also referred to as the “rule of eighths,” aids in good driver control (damping factor).

Frequently Asked Questions

What distinguishes a headphone amplifier from a DAC?

A digital to analogue converter (DAC) transforms digital sound data into audible analogue sound waves, whereas an amplifier amplifies sound before it travels through speakers or headphones to make it audible.

What is the purpose of DAC amp?

An analogue audio signal is produced by your headphones after being converted from a digital audio signal by a DAC. Similar to headphone amplifiers, standalone DACs were developed as a reaction to subpar audio quality among consumers.

Can you use wireless headphones with a DAC?

A DAC is present in every pair of wireless headphones. The DAC is responsible for carrying out the crucial task of converting the digital signal to analogue when audio is played from a sound source. Should the need arise, wireless headphones can also be used with external DACs. Therefore, the answer is that a DAC can be used with wireless headphones.

Can a DAC be used without an amp?

A DAC cannot be utilized without an amplifier. A DAC’s main function is to transform digital signals into analogue waveforms. The audio signal is too weak to be picked up by the sound source after conversion. Amplification is therefore required to raise the signal to its ideal level.

Does a DAC make things louder?

Utilizing an external DAC is one way to boost the overall volume of your music because many of them come equipped with amplifiers.

Are DACs beneficial for all types of headphones?

For the majority of users, an external DAC is only required if the impedance is impairing the volume. You’ll undoubtedly notice the advantages of an external DAC if your headphones have an impedance of more than 100 ohms. An external DAC, however, is only an extra cost if you’re a serious music enthusiast.

What degree does DAC impact sound?

One of the major enhancements a DAC will make may not be immediately apparent, despite the fact that it will increase the quality of your music. Your listening setup’s entire soundstage will be enhanced, and a broader, deeper listening scape will be created, thanks to a high-quality DAC.

Do DACs have a uniform sound?

No, not all DACs sound alike, and not all excellent DACs sound alike.

What is DAC mode for USB?

The USB DAC transforms computer-generated digital audio impulses into analogue signals used by amplifiers and speakers. Purists contend that external USB DACs offer superior conversion and higher sound quality even when an analogue connection may be formed via the outputs on the computer’s sound card.

Why is DAC necessary?

The DAC, which is an essential component of devices like computers, tablets, and smartphones, is the key to unlocking the ease of digital music. It transforms the endless reams of digital data into an analogue signal that can be understood by devices like speakers and headphones as well as the human ear.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>