SMSL DO200 MKII Bluetooth 5.0 MQA Full Decoding User Manual
- June 11, 2024
- SMSL
Table of Contents
DO200 MKII Bluetooth 5.0 MQA Full Decoding
User Manual
DO200 MKII
USER MANUAL
Ver 1.1
The contents of this manual may be changed with the edition, and are subject to change without notice.
Safety Notes
- Install this unit in a well ventilated, cool, dry, clean place-away from direct sunlight, heat sources, vibration, dust, moisture, or cold..
- Use the voltage specified on this unit Only. Using this unit with a higher voltage than specified is dangerous and may cause fire , damage to this unit, or personal injury.
- Our company will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.
- Do not attempt to modify or fix this unit by yourself. Contact alesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
- When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect the power cable from the AC wall outlet.
Important note:
The product specifications and information mentioned in this manual are for
reference only. The content of this manual is subject to change without
notice.
Warranty Terms
-
The Term of Service
Foshan Shuangmusanlin Technology Co., Ltd promises to offer good-quality products. If the product is broken in 7 days after purchasing when you use it normally, you can choose to send it back for return, replacement or repairing (only the product does not affect the second sales can be returned ). Repairing for free in one year if you use it normally. -
Date of purchase is in accordance with the date on invoice or receipt uesd by seller, and if you buy it on line, you can show the screenshot of trade.
-
If an inappropriate usage causes the unit damaged, the warranty will be void. As below.
All damages by inappropriate use, including using it under non-normal working environment or without following the instructions.
Dismantling, refitting, repairing by user in private.
Causing damage by using some fittings instead of the designative or accredited ones.
Cannot provide credible proof of purchase. -
Sending it back to our company for repairing.
-
Contact your S.M.S.L Audio reseller for a return or replacement.
Features
- Both USB and SPDIF support MQA decoding function, and support MQA-CD;
- 2x advanced ES9068AS D/A chips, fully optimized to THD+N as low as -122dB, far exceeding the official specifications;
- 5x High-End dual op amp OPA1612A and a large number of audio grade components;
- XMOS XU-316, a true 32bit USB solution, supporting DoP256 and native DSD512, PCM supports up to 768kHz;
- All input ports support DSD(Except BT), coaxial, optical and AES support DoP64;
- Qualcomm’s latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC;
- Ultra-low phase noise and optimized clock system to achieve ultra-low clock jitter;
- Tempered glass display panel, higher light transmittance, longer service life;
- Low-noise power supply, while improving power efficiency and lower power consumption;
- Discrete component linear power supplies and multiple low-noise power supplies specially designed for analog circuits;
- High-quality gold-plated input and output connection terminals;
- Full-view color IPS display with dimmer function;
- Japan Audio Association (JAS) Hi-Res certification;
- Equipped with remote control and full-function remote control.
Specifications
Input ……………………………… USB / Optical / Coaxial / AES/EBU / Bluetooth / I2S
Output …………………………………………………… RCA /XLR
Output Level …………………………………………………. XLR 4.0VrmsRCA 2.0Vrms
THD+N ………………………………………………0.00008%(-122dB)
Dynamic range ……………………………………………….XLR 129dB
RCA 125dB SNR ……………………………………………………………. 128dB
Output impedance ………………………………………………..100Ω
USB transmission ……………………………………………Asynchronization
USB compatibility ……………………Windows 7 / 8 / 8.1 / 10 / 11, Mac OSX、Linux
Bit depth …………………………………….USB Optical / Coaxial / AES/EBU
1bit， 16 ~ 32bit
1bit， 16 ~ 24bit
Sampling rate ……………………….USB / I2S
PCM 44.1 ~ 768kHz
DSD 2.8224 ~ 22.5792MHz
Optical / Coaxial / AES/EBU
PCM 44.1 ~ 192kHz
DSD DSD64(DoP)
Bluetooth specification………………..BT 5.0(support SBC,AAC,aptX,aptX HD,LDAC)
Power Consumption …………………………………………………………..5W
Standby power …………………………………………………………………. <0.5W
Size …………………………………..210X43X185mm (WxHxD)
Weight ………………………………………………………………….. 1.2kg
Specifications are subject to change without notice.
Remote control
- Install 2 x AAA batteries as instructions.
- When using the remote control, point it toward the remote con-trol signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control.
- The remote control might not work if the remote control signal receiver on the unit is exposed to direct sunlight or bright light. If this occurs, try moving the unit.
- Beware that use of this remote control could cause the unin-tentional operation of other devices that can be controlled by infra.
Operating the remote control
Note
This remote controller use 2 x R03/AAA batteries.
Display Interface and Instructions
1. Knob
2. Remote window
3. Display
4.Optical input
5.RCA output
6.Bluetooth antenna| 7. AES/EBU input
8. Balanced output
9. I2S input
10. Coaxial input
11. USB input
12. AC IN(100-240VAC)
13. Power switch
---|---
Package list
1 SMSL DO200 MKII
1 USB cable
1 Warranty card
1 Remote control
1 AC power cable
1 Bluetooth antenna
1* User manual
About MQA
MQA (Master Quality Authenticated) is an award-winning British technology that
delivers the sound of the original master recording. The master MQA file is
fully authenticated and is small enough to stream or download. The DO200 MKII
includes MQA technology, which enables you to playback MQA audio files and
streams, delivering the sound of the original master recording.
Visit How it works https://www.mqa.co.uk/how-it-works for more information.
MQA files playback
- DO200 MKII has only USB, optical, coaxial and AES interfaces, supports MQA decoding.
- DO200 MKII’s MQA playback does not require additional software. You can use foobar2000 or Audirvana for MQA playback as it supports ASIO or WASAPI audio output. When playing MQA audio, it is suggested to adjust the volume of the computer to the maximum for the best audio output.
- The DO200 MKII LED next to MQA logo glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
- When playing an MQA file, the sampling rate of the original master recording is displayed.
and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Instructions
INPUTS
- USB
- BLUETOOTH
- OPTICAL
- COAXIAL
- AES/EBU
- I2S(HDMI)
OUTPUTS
- ALL LINE OUT
- BALANCED
- UNBALANCED
PCM FILTER
- Fast Linear
- Slow minimum
- Minimum Phase
SOUND COLOR
There are 9 sound color settings in DO200 MKII.
Rich1 、 Rich2 、 Rich3
Tube1 、 Tube2 、 Tube3
Crystal1 、 Crystal2 、 Crystal3
This setting is usingthe DSP of ES9068AS,to make some different sound color,
all of these settings will not change the frequency response curve.When set to
“Standard”, this setting will be bypassed.
PRE MODE
Volume control enable or disable.
- Vol Fixed : In this mode, volume is fixed on max output level, and the DO200 MKII will ignore the volume operations.
- Vol Variable: In this mode, volume can be adjust, and make DO200 MKII a pre-amplifier.
FN KEY FOR
- Outputs
- Bluetooth
- PHASE
DPLL
MIN ~ MAX
(A total of 15 kinds, the default is 5 kinds. The larger the number is, the
stronger the range to adapt to jitter, and the smaller the number, the better
the performance against
clock jitter.)
This DPLL setting is a special function of ESS series products. It can adjust
the internal DPLL digital phase locked loop circuit Bandwidth, so that the
chip achieves a balance between anti clock jitter and input tolerance.
Its function:
- When the clock stability of the input signal is good, this value can be reduced, so that the clock performance of the system is better;
- When the clock stability of the input signal is not good, the sound may be interrupted. Increase this value can avoid the sound interruption! Especially when using TV as signal source!
I2S MODE
- NORMAL
- INVERTED
Note: This option is
used to match different I2S interface standards, please check the interface
definition of the signal source before use
I 2S DSD CHANNEL
- DSDL=PCM DATA (The DSD left channel using the PCM DATA pin)
- DSDL=PCM LRCK (The DSD left channel using the PCM LRCK pin)
Note: When using the I2S input to streaming DSD audio, if you find that
the left and right channels are incorrect, you can use this option to correct
it.
AUDIO PHASE
- NORMAL (2+,3-)
- INVERTED(2-,3+)
DIMMER
- 5 second ~ 60 second
(The range is 5 seconds-60 seconds. After setting, the screen will
automatically go off within this time, and the screen will re-light up if you
operate the remote control or the knob at any time.)
BRIGHTNESS
LEVEL 1 ~ LEVEL 6
RESET
During Bluetooth input, long press the middle button of the knob, the system
will only reset the Bluetooth pairing status;
During other input, long press the middle button of the knob, the system will
clear all settings, including Bluetooth.
References
- MQA Explained | How MQA Audio Technology Works | MQA
- MQA Explained | How MQA Audio Technology Works | MQA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>