SMSL DO100 Stereo DAC User Manual

SMSL DO100 Stereo DAC

Safety Notes

• Install this unit in a well-ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
• Use the voltage specified on this unit Only. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, or personal injury.
• Our company will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified.
• Do not attempt to modify or fix this unit by yourself. Contact a salesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
• When not planning to use this unit for long periods of time (i.e. when going on vacation), disconnect the power cable from the AC wall outlet.

Important note
The product specifications and information mentioned in this manual are for reference only. The content of this manual is subject to change without notice.

Warranty Terms

The Term of Service

1. Foshan Shuangmusanlin Technology Co., Ltd. promises to offer good-quality products. If the product is broken within 7 days after purchasing when you use it normally, you can choose to Send it back for return, replacement, or repair (only the product does not affect the second sale can be returned ). Repairing for free in one year if you use it normally
2. The date of purchase is in accordance with the date on the invoice or receipt used by the seller, and if you buy it online, you can show a screenshot of the trade.
3. If inappropriate usage causes the unit damaged, the warranty will be void. As below
   • All damages by inappropriate use, including using it in a non-normal working environment or without following the instructions.
   • Dismantling, refitting, and repairing by the user in private.
   • Causing damage by using some fittings instead of the designative or accredited ones.
   • Cannot provide credible proof of purchase.
4. Sending it back to our company for repairing.
5. Contact your S.M.S.L Audio reseller for a return or replacement

Features

Mini-size design, very suitable for desktop use; CNC integrated milling process, simple and stylish; 2 pieces of ESS Technology high-end D/A chip ES9038Q2M; Qualcomm latest Bluetooth chip supports L.DAC 24bit/96kHz, APTX/HD, SBC. EACH 4x high-end dual op amp OPA1612 and a large number of audio grade components; The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz; Audio clock processing circuit, greatly reducing the clock jitter; All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64; Built-in specially designed low-noise switching power supply Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits; connection terminals; Equipped with full-function remote control.

Specifications

• Input ……………………………………………………..USB / Optical / Coaxial / Bluetooth
• Output …………………………………………………………………………………….XLR / RCA
• Output Level ………………………………………XLR 4.0Vrms
• …………………………………………………………RCA 2.0Vrms
• THD+N ………………………………………………………………………0.00008% (-121dB)
• Dynamic range………………………………….. XLR 127dB
• ……………………………………………………….. RCA 125dB
• SNR…………………………………………………….XLR 126dB
• …………………………………………………………RCA 124dB
• Output impedance ………………………………………………………………………….100Ω
• USB transmission……………………………………..USB1.1, USB2.0(synchronization)
• USB compatibility ……………………………..Windows 7/8/8.1/10/11(Needs Driver)
• …………………………………………………… Mac OSX10.6 or Later、Linux(Driverless)
• Bit depth ……………………………USB 1bit，16~32bit
• Optical / Coaxial 1bit，16~24bit
• Sampling rate …………………….USB PCM 44.1~768kHz
• DSD 2.8224~22.5792MHz
• Optical / Coaxial PCM 44.1~192kHz
• DSD DSD64(DoP)
• Bluetooth specification…………………………………………………………………………5.0
• LDAC ………………………………………….. 24bit/96kHz (990kbps/660kbps/330kbps)
• aptX-HD …………………………………………………………………24bit/48 kHz_576kbps
• aptX …………………………………………………………………….16bit/44.1 kHz_352kbps
• SBC …………………………………………………………………….16bit/44.1 kHz_328kbps
• AAC …………………………………………………………………….16bit/44.1 kHz_320kbps
• Power Consumption…………………………………………………………………………….5W
• Standby power ……………………………………………………………………………..<0.5W
• Size …………………………………………………………………..150x128x39mm(WxHxD)
• Weight ……………………………………………………………………………….560g / 1.23Ibs

Specifications are subject to change without notice

Remote control

Install 2 x AAA batteries as instructions. When using the remote control, point it toward the remote control signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control. The remote control might not work if the remote control signal receiver on the unit is exposed to direct sunlight or bright light. If this occurs, try moving the unit. Beware that the use of this remote control could cause the unintentional operation of other devices that can be controlled by infra.

Operating the remote control

Note
This remote controller uses 2 x R03/AAA batteries.

Display Interface and Instructions

1. Knob
2. Remote window
3. Display
4. RCA output
5. Bluetooth antenna
6. Optical input
7. XLR output
8. Coaxial input
9. USB Input
10. 5 AC power input(AC100-240V)

Package list

• 1 SMSL DO100 1 Remote control 1* Bluetooth antenna
• 1 USB cable 1 AC power cable 1* User manual

Instructions

Knob Instructions: Short press the knob (0.5-1 second) to enter the menu, short press the knob Again to enter the next level menu, enter the menu to be adjusted, and rotate left and right to select, when the selection is complete, press and hold for 2 seconds to exit to the main interface.
Example: Select switching input: short press the knob to see the current input, then rotate left and right to select the desired input.
Example: To adjust the brightness, press 5 times continuously, you will see bl, and then rotate left and right to adjust the desired brightness.

Function introduction

• INPUT
• USB (USB input)
• BT (Bluetooth input)
• OPT (Optical input)
• COA (Coaxial input)

Function introduction

PCM FILTER

• FL1 (Fixed minimum phase fast roll-off)
• FL2 (Linear slow roll-off)
• FL3 (Apodizing Apodization Filter)
• FL4 (Minimum phase fast roll-off)
• FL5 (Minimum phase slow roll-off)
• FL6 (Linear fast roll-off)
• FL7 (Brickwall Mixing Filter)

DPLL

• DPLL 1-9, the lower the value, the smaller the clock jitter.
• This DPLL setting is a unique function of ESS series products.
• It can adjust the bandwidth of the DPLL digital phase-locked loop circuit inside the chip so that the chip can achieve a balance between anti-clock utter and input tolerance

Effect

• When the clock stability of the input signal is good, this value can be reduced, so that the clock performance of the system is better
• When the clock stability of the input signal is not good, the sound may be interrupted. Increasing this value can avoid the occurrence of audio interruption! Especially when using V as the signal source
• USB MODE
• UACI

(USB1.1 description: When USB1.1 is selected, the WIN system is free of drive, and supports sampling rate 44.1-96kHz, 24bit)

• UAC2 (select USB2.0, WIN system needs to install driver, support DSD)
• BRIGHTNESS
• bi1-5

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>