POLSEN XP-30D Inline XLR Microphone Preamplifier User Manual
- June 7, 2024
- POLSEN
Table of Contents
XP-30D
INLINE XLR
MICROPHONE PREAMPLIFIER
PRODUCT MANUAL
THANK YOU FOR CHOOSING POLSEN.
The Polsen XP-30D adds 30 dB of clean gain to any low-output dynamic or ribbon
mic that needs a little extra gain boost before it reaches the input of your
preamp or mixing board. Its XLR input and output make it simple to set up, and
it operates on 48 V phantom power but doesn’t pass it through to protect
sensitive ribbon mics from damage. The XP-30D’s metal construction and compact
size are made for travel, and it will stand up to live shows and repeated use
when recording.
CONNECTING THE XP-30D
SPECIFICATIONS
Gain +30 dB
I/O 3-pin XLR female input
3-pin XLR male output
Frequency response 20 Hz to 20 kHz
Impedance 22 k Noise <1 mV
Operating voltage 48 V (phantom power)
Material Metal
Dimensions (L × W × H) 4.5 × 1.25 × 1 in. (11.4 × 3.2 × 2.5 cm)
Weight 3.45 oz. (98 g)
ONE-YEAR LIMITED WARRANTY
This Polsen product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. The Inoperability of the product or part(s) shall be determined
by the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Polsen Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Polsen along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.polsenaudio.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Polsen is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved. GG1
References
- Gradus | Gradus Group
- Polsen | Microphones & Accessories, Headphones, Megaphones, Computer Audio Hardware & Live Sound
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>