tp-link HS103 Smart Wi-Fi Plug Lite User Guide
- June 7, 2024
- tp-link
Table of Contents
tp-link HS103 Smart Wi-Fi Plug Lite User Guide
About This Guide
This guide provides a brief introduction to Smart Wi-Fi Plug Lite and the Kasa app, as well as regulatory information. Please note that features of Smart Wi- Fi Plug Lite may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used.
Convention
|
Description
---|---
Teal
| Key information appears in teal, including management page text such as
menus, items, buttons and so on.
Underline|
Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
- Specifications can be found on the product page at http://www.tp-link.com.
- Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support.
Introduction
TP-Link’s Smart Wi-Fi Plug Lite is a compact home device that turns your outlet into a controllable, customizable and multi functional outlet, enabling you to easily manage plugged-in electronics devices and set schedules via the Kasa mobile app, no matter where you find yourself.
- Remote Control – Control devices connected to the smart plug wherever you are with the free Kasa app
- Voice Control – Control your lights by voice commands through support from Amazon Alexa, Google Assistant
- Works with Nest – Automatically control devices when Nest detects that you’re home and away
- Scheduling – Program lights to turn on and off at set times throughout the day or night
- Away Mode – Turn your devices on and off at different times to give the appearance that someone is home
- Compact Design – Fit any standard outlet and leaves second outlet free
Appearance
Smart Wi-Fi Plug Lite has an LED that changes color according to its status
and a Power/Settings button to help you better configure your smart plug. See
the explanation below:
-
Press for 1 second to turn the socket ON or OFF.
Press and hold for 5 seconds or until the LED flashes amber and blue alternately to initiate the app onboarding process (SoftAP).
Press and hold for 10 seconds or until the LED flashes amber rapidly to factory reset the Smart Wi-Fi Plug Lite. -
Flashing amber and blue: App onboarding process (SoftAP) initiated.
Flashing blue rapidly: Connecting to the network.
Solid blue: Connected to the network.
Flashing amber rapidly: Factory resetting.
Solid amber: Initializing, rebooting, or no network connection.
Off: The Smart Wi-Fi Plug Lite is switched OFF.
Set Up Your Smart Wi-Fi Plug Lite
Follow the steps below to set up your smart plug via Kasa for Mobile app.
-
Download and install Kasa app Go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet.
-
Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If you don’t have a TP-Link ID, tap Create Account and the Kasa app will guide you through the rest.
-
Add device
Tap the + button in the Kasa app and select Smart Plug Mini or Lite Series.
-
Set up your smart plug
Follow the Kasa app instructions to set up your smart plug and connect it to your home network.
-
Complete and enjoy
Your smart plug is all set up and saved in your device list. You can now enjoy using it.
Main Device Controls
After you successfully set up your Smart Wi-Fi Plug Lite, you will see the home page of the Kasa app. Here you can view the status of all devices that you’ve added to Kasa and manage them. Tap on a smart plug to check the current status and the total runtime.
Home Page
Device Status
Configure Your Smart Wi-Fi Plug Lite
On Device Status page, you can set Schedule, preset Away Mode, set Timer and change the settings of your smart plug.
Set Schedule
Tap to set a schedule for your smart plug to simplify your daily routine by
creating automatic On/Off action.
Preset Away Mode
Tap to preset the Away Mode and your smart plug will be randomly turned on/off
during this time.
Set Timer
Tap to set the time to turn your smart plug on or off after specific times.
Device Settings
Tap to view and change the settings of your smart plug.
Create Scenes
A scene is a preset group of smart devices that can be programmed, customized
and activated simultaneously at the touch of a button from your smartphone or
tablet, allowing you to easily set your mood, activity or fit any special
occasion. This page allows you to preset how your smart home devices should
act automatically at special occasions.
Discover Kasa
Use the Kasa app to pair your Smart Wi-Fi Plug Lite with Amazon Alexa, Google Home Assistant and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Nest to trigger changes when you arrive home or leave for the day.
Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and
Away / Amazon Alexa / Google Assistant for detailed instructions.
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. 
is a registered
trademark of TP-Link Technologies Co., Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or
used to make any derivative such as translation, transformation, or adaptation
without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-
Link Technologies Co., Ltd. All rights reserved.
**FCC compliance information statement
Product Name: Smart Wi-Fi Plug Lite
Model Number: HS103
Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America,
Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail:** sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is
applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation , has determined that the equipment shown as
above has been shown to comply with the applicable technical standards, FCC
part 15. There is no unauthorized change is made in the equipment and the
equipment is properly maintained and operated.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information
- The automatic operation feature is Type 1.B action according to UL 60730-1.
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
- The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Warnings
- Operating Temperature: 0 ºC-40 ºC (32°F-104°F)
- Operating Humidity: 10%-90%RH, Non-condensing
Explanation of the symbols on the product label
Symbol
|
Explanation
---|---
|
AC voltage
|
Indoor use only
|
Protection earth
|
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
References
- Link: Simple, secure one-click payments
- TP-Link Product Support - Wireless Networking Equipment Support
- WiFi Networking Equipment for Home & Business | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>