vooni B07B5YKL8V Bluetooth Speaker Table User Manual
- June 7, 2024
- vooni
Table of Contents
Bluetooth Speaker Table with Wireless Charging
User Manual
Voni Bluetooth Speaker Table with Wireless Charging
User Manual
What’s in the Box
Speaker table with 3 legs, USB cable (80 cm), user manual
Specifications
- 5W wireless charging
- Audio input: Bluetooth (JL0)
- Bluetooth transmit distance: up to 10 meters
- Speaker: 10W
- Li-ion battery (2400mAh),7V
- Playing time: 2-3 hours (on max volume)
- Charging time: 3-4 hours
- Measurements: 39.6 x 39.6 x 63 cm
- Weight: 3.6 kg
- Material: MDF with polyester mesh
- The maximum load weight of this table is 5 kg, do not put more weight on it as it might cause damage to the unit
Assembly instructions
- Put the speaker with the fixed holes upwards.
- Take one of the legs and match it with one fixed hole.
- Screw the leg in place by rotating it clockwise until tightly fixed.
- Follow the same procedure to fix the other two legs.
- Make sure that all three legs are correctly screwed
- Place the speaker on the ground legs down, and it is ready to use.
Product description
- Power On/Off
- Mode: connect/disconnect Bluetooth device (long press) / Play or pause music (short press)
- Micro USB charging port
- Volume up (long press) / Play next song (short press)
- Volume down (long press) / Play previous song (short press)
- USB charging port
- Speaker position
Charging the speaker table
Use the included USB cable to charge the speaker table with a standard USB power adapter (not included). Make sure to fully charge the device prior to first use. Charging time is 3-4 hours.
Bluetooth speaker
Press the on/off button on the table once. Connect to the Bluetooth device
“Vooni Table” on your phone, computer or tablet. You are successfully
connected when you hear a beeping sound to confirm the pairing.
Press the Mode button once to play/pause music. A long press on the button
will connect/disconnect the speaker from a Bluetooth-connected device.
While playing music, you can adjust the volume by long-pressing the + and –
buttons, and switch to the next or previous song by short pressing the volume
buttons.
Wireless charging
- If you have a smartphone with wireless charging capability (Qi Charging), you can charge it by placing the phone on the top of the speaker table.
- Make sure to place your smartphone centered within the marked charging If there is a charging connection, you will hear a short acoustic signal. You can remove your smartphone from the charging area at any time to end the charging process.
- Please note that the table needs to be connected to a power source when you use wireless charging.
USB charging
When the speaker is powered on (or connected to a power source), the USB ports can charge mobile phones. The USB port output is DC 5V/1A. You can use both ports simultaneously to charge two different devices.
Care and Maintenance
- The Bluetooth speaker table is intended for indoor use
- If needed, wipe clean with a damp cloth
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>