Honeywell Home FocusPRO TH6320WF1005 Smart Series Programmable Thermostat User Guide

Honeywell Home FocusPRO TH6320WF1005 Smart Series Programmable Thermostat User Guide

Home screen quick reference

Once your thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it.

The screen lights when you press any button. It stays lit for 8 seconds after you complete changes.

Connecting to your Wi-Fi network

1. Connect to your thermostat.

   • Make sure the thermostat displays Wi-Fi SETUP.
   • On the wireless device (tablet, laptop, smartphone), view the list of available Wi-Fi networks.
   • Connect to the network called NewThermostat_123456 (the number will vary).
     Note: If you are asked to specify a home, public, or office network,select  Home Network.

2. Join your home network.

   • Open your web browser to access the Thermostat Wi-Fi Setup page.
     The browser should automatically direct you to the correct page; ifit does not, go to http://192.168.1.1

   • Find the name of your home network on this page and select it.
     Note: Some routers have enhanced features such as guest networks; use your home network.

   • Complete the instructions for joining your Wi-Fi network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.)
     Note: If you did not correctly connect to the thermostat, you may see your home router page. If so, return to Step 1.
     Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page:

   • Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks.

   • If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list. Click on the new network in the list and enter the password if necessary. Click on Connect to join the network.

3. Make sure your thermostat is connected.
   While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success. The Wi-Fi signal strength will appear in the top-right corner.
   After about 60 seconds, the home screen will appear and Register at Total Connect will flash until registration is complete.

Note: If the thermostat displays Connection Failure or continues to display Wi-Fi Setup, confirm you correctly entered your home network password in step 2.

Registering your thermostat online

To view and set your thermostat remotely, you must have a Total Connect Comfort account. Follow the instructions below.

1. Open the Total Connect Comfort web site.
   Go to www.mytotalconnectcomfort.com

Setting the time and day

1. Press Set Clock/Day/Schedule, then press or to set clock.
2. Press Set Day, then press  or  to select the day of week.
3. Press Done to save.

Note: If the Set Clock/Day/Schedule option is not displayed, press Done.

Note: If the display flashes Set Clock, the thermostat will follow your settings for the Monday “Wake” time period until you reset the time and day.

Setting the fan

Press Fan to select On or Auto (toggle to re-select)

• Auto: Fan runs only when the heating or cooling system is on. Auto is the most commonly used setting.
• On: Fan is always on.

Note: Options may vary depending on your heating/cooling equipment.

Selecting system mode

Press System to select:

• Heat: Controls only the heating system.
• Cool: Controls only the cooling system.
• Off: Heating/cooling systems are off.
• Auto: Selects heating or cooling depending on the indoor temperature.
• Em Heat (heat pumps with aux. heat): Controls auxiliary/emergency heat. Compressor is off.

Note: Depending on how your thermostat was installed, you may not see all system settings.

Adjusting program schedules

1. Press Set Clock/Day/Schedule, then Set Schedule.
2. Press or to set your Monday (Mon) Wake time, then press Next.
3. Press or to set the temperature for this period, then press Next.
4. Set time and temperature for the next time period (Leave). Repeat Steps 2 and 3 for each time period.
5. Press Next to set time periods for the next day. Repeat Steps 2 through
6. for each day.
7. Press Done to save and exit.

Note: Make sure the thermostat is set to the system mode you want to program (Heat or Cool).

Overriding schedules temporarily

Press or to immediately adjust the temperature.

The new temperature will be maintained only until the next programmed time period begins.

To cancel the temporary setting at any time, press Cancel. The program schedule will resume.

Overriding schedules permanently

1. Press HOLD to permanently adjust the temperature. This will turn off the program schedule.
2. Press or to adjust the temperature setting. The temperature you set will be maintained 24 hours a day until you manually change it or press Cancel to resume the program schedule

Product Manuals

Search online for 69-2736EFS for the User Guide.

Need help?

Visit honeywellhome.com/support or call 1-855-733-5465 for assistance.

This thermostat works with common 24 volt systems such as forced air,
hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat.

MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.

NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50°F (10°C).

Resideo Technologies Inc.
1985 Douglas Drive North, Golden Valley, MN 55422

33-00306EFS—07 M.S. Rev. 10-20 | Printed in United States

http://www.resideo.com/

© 2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>