SOWINK T15S 2-in-1 Wireless Charger User Manual
- June 6, 2024
- SOWINK
Table of Contents
SOWINK T15S 2-in-1 Wireless Charger
Specification
- Model: T15s
- USB-C Input: 9V/2A, 12V/1.5A
- Output (Phone): 15W
- Output (TWS/ Watch): 5W/ 3W (Not for iWatch) After charging the device on the charging station for 20 seconds, the indicator light will go out. After the device is fully charged, it will still shut down.
Warning
- Do not store the device in high temperature environment, including heat caused by intense sunlight or other forms of heat. Do not place the device in fire or other excessively hot environments. Exposure to fire or temperature above 212F(100℃) may cause explosion.
- Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not expose the wireless charger to rain or snow.
- Do not modify, repair or disassemble the unity. If so, please contact the manufacturer.
- Please switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.
Compatibility
Phone
Samsung Galaxy S:
S21/ S21+/ S21 Ultra/ S20/ S20+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ S8 Active/
S7/ S7 Edge/ S7 Active/ S6 Edge/ S6 Edge +/ S6 Active
Samsung Galaxy Note:
Note 20/ 20+/ 20 Ultra/ 10/ 10+/ 9/ 8/ 7/ 5/ FE
Apple:
iPhone 12/ 12 Pro/ 12 Pro Max/ 12 Mini/11/ 11 Pro / 11 Pro Max/ XS/ XS Max/
XR/ X/ 8/ 8 Plus/ SE 2020
Other Qi-Enabled Phones:
Google Nexus 6/ 5/ 4, Pixel 3/ 3XL
Nokia Lumia 1520/ 1020/ 930/ 929/ 928/ 920
Microsoft Lumia 950/ 950XL
LG G3/ G4/ G6/ V30/ V35/ V40/ V50, etc.
Watch (Not for Apple Watch)
Samsung Galaxy Watch3 (SM-R840)/ Watch 46mm (SM-R805 LTE/ R810 WiFi)/ Watch
42mm (SM-R815 LTE/ R810 WiFi)/ Watch (SM-R800)/
Active2 44mm (SM-R820 WiFi/ R825 LTE)/ Active2 40mm (SM-R830 WiFi/ R835 LTE)/
Active1 40mm (SM-R500/ SM-R825)/ Gear S4/ Gear S3 (SM-R770 WiFi Classic/
SM-R760 WiFi Frontier/ SM-R765 LTE Frontier)
Some watch bands may hold the watch up, causing it out of the sensing area. Please press the watch a little bit onto the charging area.
Wireless Earphones
Samsung Galaxy Buds 2/ +/ Pro/ Live Apple AirPods Pro/ AirPods 2
The AirPods charging case of model ‘A1602’ has no wireless charging function. Please refer to the serial number on the lid of the charging case.
Tips
- Please remove your phone case before charging if the thickness >5 mm.
- Only use certified QC 3.0/ PD Charging Wall Adapter to charge the devices. Do not plug into computer USB port or any other non-certified USB ports.
- Place your Qi-enabled devices accurately in the wireless charging area when charging.
- A QC 3.0/ PD adapter is required when charging 2 devices simultaneously. It is suggested to use 9V 2A, 12V 2A adapter.
- Make sure to disconnect the device from power when cleaning.
- It is normal and safe to hear a humming noise when very close to the charger. It means that the wireless charger is adjusting its temperature to achieve a more efficient charging speed.
- If your device can not be fully charged, this may due to high environmental temperature, please recharge after the temperature is lowered. This charger has temperature control to safe guard your device when charging.
FAQ
Q: If the LED light flashes and the wireless charging pad doesn’t work, how
can I deal with this?
A:
- Make sure your device supports the Qi wireless charging function before using this wireless charger.
- Check if you are using the QC 3.0/ PD adapter to charge the devices.
- Test with other USB cables.
- Check whether the cases of your devices come with metal objects. Magnetic and metal attachments will prevent charging and make the LED flash.
- Please make sure that the thickness of your phone case does not exceed 5 mm. Especially the ‘Otterbox’ cases.
Q: Will the led light stay on during charging at night？
A: No, the lights do not stay on. If you have any other questions, please
feel free to contact us via ‘Buyer Message’.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>