DIGITNOW DT18 Wireless Bluetooth Earphone User Manual

DIGITNOW DT18 Wireless Bluetooth Earphone

Product demonstration

Products Show

Battery: Li-battery 3.7V 50mAh
Charging Time:2Hrs for earbuds/ 3Hrs for charging case
Call/Music playing time: 3-4Hrs (Real using time based on type of music, volume sizeetc.)
Bluetooth Protocol: AVRCP:V1.3/A2DP:V1.2/HFP:V1.5/HSP:V1.2

CUSTOMIZATION

To improve your wearing experience, please select a best-fit ear cap for you.

How to pair earbuds with your phone

For the first time, please pick up two earbuds from charging case, and they will power and pair to each other automatically within 10 seconds.
The indicators will flash to white light.(In pairing mode)
Selecting the [T18] from device list in your bluetooth manual.

Reset

If only one earbud connect the phone/the two earbuds can not pair together,please try the below reset steps:

• Please put the earbuds back into the earbud charging case, then restart the earbud, and the earbud will automatically handle the abnormality once.
• If you cannot connect or connect abnormally, Please put the earbuds back into the charging case, delete all [T18] records on your device, and retry the pairing operation.

Button Control

Basic operation

1A
Charging case full recharge| About 3hours| Digital tube percentage display|  |
Charging case discharge|  | Digital tube percentage display/Running light Power indicator|  |
Headset charge|  | White light long bright|  |
Headset full charge| About 2hours| Headset indicator, digital tube and running light turn off|  |
Set-up paring| Long press Menu for 2 seconds| White light flashing| Voice prompt|
Turn off| Long press Menu for 4 seconds| White light long bright| Voice prompt|
Left/Right headsets auto pairing| When the headset is taken out from the charging case, the white lights of the headset will flashing. Turn on the bluetooth of the phone to search for the pairing name of the headset, click “pair”,and the voice prompt “connected” will appear after pairing.| White lights of the main headset Double flashing, and white light of vice headset flashing|  |
Call|  |  | Call reporter|
Answer call| X1 Multifunctional key|  |  |
Hand-up call| X1 Multifunctional key|  |  |
Refuse call| X2 Multifunctional key|  |  |
Voice control| X3 Multifunctional key|  | “Du”| Smart phone support

this function

Music play| X1 Multifunctional key|  |  |
Music Pause| X1 Multifunctional key|  |  |
PREV Song| X2 Left earphone Multifunctional key|  |  |
Next Song| X2 Right earphone Multifunctional key|  |  |
Volume Adjust| Short press +- keys to adjust|  | Voice prompt of max volume|

Waterproof

Waterproof for daily use (sweating,rain, washing face, etc, but not for swimming under water
Please note that the phone’s Bluetooth signal can not be transmitted underwater.

Notes for Signal Transmission Distance (as illustrate)

Bluetooth Pairing instruction

1. White indicator on means earbuds turn on , white light flash into pairing mode after picking up the earbuds from charging case. L (main) earbuds Double flashing white light and “R” (vice) earbuds flash white light means earbuds pairing done, then turn on the mobile and search the Bluetooth pairing name (some mobile phones need to input the pairing code “0000”), finally, click the connection and done (White indicator off means already connect with mobile.).
2. Manual turn on with white indicator, pairing mode white indicator flashing. When “L” main earbud white light Double flashing, “R” vice earbud flash white indicator means earbuds pairing done. White indicator off means already connect with mobile. Turn on mobile and search the Bluetooth pairing name (some mobile phone need to input the pairing code “0000”), finally, click connection and done.
3. Automatically re-connection: The last paired device will reconnect by default after the first successful connection

Charging Instruction

1. Making sure earbuds and charging case are full battery at first use.

Charging case charging

1. Put the Type-C port into the charging case, and other USB ports plug into the Adapter PC, then it will start charge. The charging case battery-display screen will show the battery charging ratio status. The screen keeps light on when full charge and the earbuds indicator flashes into charge mode.
2. Make sure full battery of charging case.
3. Earbuds start to charge only when you put the earbuds into the charging slot with right way. (You can charge the charging case and earbuds at the same time, or you can charge the charging case first then to charge the earbuds. The charging case will
   automatically stop charging and the earbuds LED light is off once full battery is charged.

Turn On/Turn Off

1. Turn On: Press MFB(multi-function button) 3-5 Secs until the white indicator flashing, also “Turn On” prompt voice ( Automatically Turn On when picking up the earbuds from charging case)
2. Turn Off: Press MFB 5 Secs until the white indicator long bright, also “Turn Off” prompt voice (Automatically Turn Off when putting it back into charging case)

Charging Warning

1. After using a period of time, the earbuds don’t charge or even can’t turn on because of the oxidized magnet connector. You can handle this problem by using an alcohol rag to clean the magnet connector on earbuds and charging case.

2. Earbuds can automatically turn off immediately, meanwhile, start charging when you put back into the charging case. Also will automatically turn on and pairing when pick it up.

3. When it happens that the sound of the headphone is too low or the volume cannot be adjusted, the reason is that some android phones does not support synchronous control of the volume of Bluetooth devices.
   Please do as follows: Volume up and volume down. Both the smartphone volume button and the headphone volume button need to be operated independently to Volume up and volume down;

4. When charging the headphone, please use a charger that does not exceed 5V 1A output. Prohibited to use the fast-charging power adapter to charge it to avoid damage to the headphone battery.

Storage and Maintenance

1. Storage
   Please store in a cool and dry place

2. Maintenance

   • Recommended operating temperature range is 0-35℃; Overcooling, overheating or high-temperature environment will reduce the battery life, affect product performance.
   • Do not use in thunderstorms.
   • After a long time without use, please charge it before use.
   • Please clean the earphones with a soft dry cloth.
   • if there is water or sweat in the slot, wipe it with a dry cloth, which will not affect normal use.
   • Do not approach hard objects, which may damage the product.

Warranty Card
This card is the product warranty certificate, please keep it properly

Contact:

Maintenance records

Thanks for your choice for our products.
Please read this instruction manual carefully before use and keep it well for future use.

At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center electrical and electrotechnical waste recycling center, designated by your local authorities

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>