DIGITNOW Dual Monitor HDMI KVM Switch User Manual

DIGITNOW Dual Monitor HDMI KVM Switch User Manual

When the computer is connected to it for the first time, it will automatically install the driver on the computer. You will need to wait for 1 to 2 minutes to complete the driver installation.
Thank you for purchasing the Dual Monitor HDMI KVM. This product can control 2 computers with only one set of keyboard, mouse and 2 monitors, the mouse and keyboard can be used alternately between the two computers, and it can also control 4 HDMI output devices. It supports keyboard hot keys, infrared remote control and front panel key control. It is suitable for high-resolution display monitoring, multimedia design, multimedia post-production, video editing and other applications, providing users with great convenience.

Feature

• Portable, no software required, plug and play.
• Support headset.
• Using only 1 set of keyboard,mouse and 2 monitors to control 2 computers.
• Support resolution up to 3840*2160@60HZ.
• Support hot plug,disconnect or connect devices to the KVM at any time without turning off PC.
• With EDID emulators in each input port,keep PCs always have correct information, prevent displays setting change while switching input ports.
• Support keyboard hotkeys,IR remote control and front panel button to control KVM.
• With extra USB 2.0 port,it is possible to connect USB hard device or other USB device.

Packing List:

1 Dual Monitor HDMI KVM
1 IR remote control
1 DC 12V power adapter
1 User manual
4 * HDMI Cable

Panel Description:

computer. USB: connect to computer by USB type A totype B cable.
2| PC 2 input| HDMI input A/B: Connect to the two outputs of the same computer. USB: Connect to computer by USB type A totype B cable
3| Standard USB 2.0 port| Connect to USB 2.0 devices,printers,USB drives.
4| Keyboard and mouse input| Connect to keyboard and mouse.
5| HDMI output ports| Connect to HDMI displays.(Display1 displays the signal of Input A, Display2 displays the signal of Input B)
6| DC 12V| DC 12V power supply
7| L/R audio output| Analog audio output,connect to speaker
8| USB connection status| LEDs will be lit if the USB type B ports connect to computers,and computers are on
9| Input selection status| Indicate current active selected input source LED1 on:Both monitors display PC1LED2 is on:Both monitors display PC2 LED1&LED2 on:One monitor display one PC
10| Input selection button| Switch inputs between 2PCs
11| IR receiver| Receive IR remote signal
12| Power switch| Turn on or turn off power supply

Display Mode:

Display mode 1:
LED1 on :Both monitors display PC1

LED2 on :Both monitors display PC2

Display mode 2:
LED1&LED2 on :one monitor display one PC

Connection Diagram:

Step1: Connect the two outputs of the PC1 to the input A and input B of the KVM PC1 input. Connect the USB of the PC to the USB of the KVM PC1 inputs with USB type A to B cable.

Step2: Connect keyboard, mouse or wireless dongle of the keyboard and mouse to the specified ports.

Step3: Connect speaker and monitor to the KVM.

Step4: Turn on the power switch to start the Dual Monitor KVM.

Sound card settings
HDMI audio output settings are as follows.

1. Right click  on the desktop taskbar, choose “Playback devices”
   

2. Set as the speaker output of the display, the setting is completed as shown below.
   

How To Use:

1. Set up the connection according to the connection diagram.
2. After all the PCs are started in step 1, then you can control or the front panel key “SW”

How to use keyboard hot keys:

 Select input source 1 in display mode 1

 Select input source 2 in display mode 1

 Keyboard and mouse focus on the desktop of input source 1 in display mode 2

 Keyboard and mouse focus on the desktop of input source 2 in display mode 2

 Enable or disable buzzer sound

 Reset the keyboard and mouse

 Press[Right-Alt] key twice to change active selected computer in display mode 2

HON TO CHANGE THE HOT KEYS COMBINATION:

If no [Scroll Lock] key on your keyboard or the [Scroll Lock] key is used for other functionality, you can take [Right-Ctrl] hotkey instead of [Scroll Lock] key by below two ways:

1. After turning on KVM 10s, press front panel button “Select” until you hear the buzzer is beeping, the restart the KVM.
2. Execute hotkey command [Scroll Lock] + [Scroll Lock] + [F1].
   Switch the control hotkey to [Right-Ctrl] After you had done as above,the hotkey combinations would be change to:[Right-Ctrl] + [Right-Ctrl] + [xxx].
   Note: xxx refers to keyboard key 1~4, F1,F2,F11 .

The same if you want to change the hotkey from [Right-Ctrl] to [Scroll Lock], you could do as follows:

1. After turning on KVM 10s,press front panel button “select” until you hear the buzzer is beeping, then restart the KVM.
2. Execute hotkey command: [Right-Ctrl] + [Right-Ctrl] + [F1].
   Switch the control hotkey to [Scroll Lock]

IR Remote Control:

monitors
| Select keyboard and mouse to focus on the desktop of PC1/PC2
| Select input source “B”
__| Select input source “A”
__| Select headphone input

Note: The remote control battery model is CR2025

 At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authoritie

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>