1MORE Spearhead VR BT In-Ear Headphones User Manual

1MORE Spearhead VR BT In-Ear Headphones User Manual

Power

Power On: Press and hold the power button for 2 seconds. The blue light will go on for 1 second. Power Off: Press and hold the power button for 4 seconds. The red light will flash for 1 second.

Bluetooth Pairing

The pairing mode starts automatically the first time it was turned on. The red and blue lights will flash alternately.

Pairing:
When the headphones are on, press and hold the power button for 2 seconds to start the pairing mode.
When the headphones are off, press and hold the metallic button for 4 seconds to start the pairing mode.

Placement

Fit

Charging

10- minute fast charge for 3-hour use.
The red light is on while charging. When charging is finished,the red light will turn off.

 Control Box

Phone:

• May not be compatible with some Android cellphone.

Music:

• Above function may vary with different devices.
  

LED lighting modes set-up:

Press the play/pause button to activate the LED lighting modes when standby, then press the either “+” or “-” to shift in 4 modes:

1. Constant
2. Heartbeat
3. Breath
4. Turn Off.

Extra Functions

Security Pairing: If the pairing phone has Bluetooth prior to 3.0, please use the default security code “0000”.

Unpairing: Press and hold Vol+ and Vol- for 3 seconds. The headphones will switch to automatic discovery mode.

Battery/Volume Display: Currently supports iOS only; may not support other operating systems.

Multi-Device Connection: When there are two phones connected to the headphones, only one of the phones will be supported.

If Out of Wireless Connection Range: The headphones will try to reconnect for 5 minutes. Then they will turn off automatically if not connected to any device.

1 MORE PRODUCT WARRANTY

1 MORE products are warranted against defects in materials and craftsmanship for a period of one year from the date of original retail purchase, when used in accordance with 1 MORE’s user manuals. Under this warranty, your claim can be directed to 1 MORE, even if you purchased the product from an authorized third party. During the warranty period, 1 MORE will, at its sole option, repair or replace the original, defective parts or issue a refund in the amount of the original purchase price. This warranty does not include resulting from accidents, or from improper use, maintenance, or repair, or from other causes that are not detects in materials or craftsmanship.

Unfortunately, from time to time, 1 MORE products are sold by dealers or internet sites that are not authorized by 1 MORE. In most cases, products sold by these unauthorized companies were not purchased directly from 1 MORE. 1 MORE products sold by unauthorized details are sometimes:

1. Purchased on a “gray” market from other countries and illegally sold in the US
2. Counterfeit products not produced by 1 MORE
3. Damaged, defective, or previously used products (B-stock)
4. Products stolen from authorized dealers or other sources

Unauthorized dealers may deceive consumers by implying the product is covered by 1 MORE’s warranty policy. Any products sold by unauthorized dealers are not entitled to 1 MORE warranty coverage. We are using our best efforts to prohibit companies from taking advantage of consumers, but these practices still exist. To ensure quality and warranty on your purchase only buy from 1 MORE USA authorized retailers:

1 MORE.com
AMAZON USA 1 MORE USA Inc. Storefront
AMAZON CANADA 1 MORE USA Inc. Storefront
Ebay 1 more-usa
Costco Wholesale Corporation

We Appreciate Your Business

We know you will enjoy new 1 MORE headphones as much as we do. At 1 MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the OR code. Go to www.1more.c,om and sign up for VIP, and 1 MORE will treat you like one.

Tips

1. Please read this instruction manual carefully and retain for future reference.
2. Please fully charge the battery before first use.
3. If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
4. Only use chargers that are FCC (Federal Communications Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the product.

Safety Information

1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones while operating a motor vehicle. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
7. Adult supervision is required for children age 6 and under.
8. If you don’t feel comfortable after wearing the headphones, please refer to an aurist for advice on whether or not in-ear headphones are suitable for you.

FAQ

1. The headphones don’t turn on.
   Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.

2. The headphones and my device do not connect, or take a long time to connect.

   • Check that your headphones are in the “discoverable’ mode (red and blue lights flash alternately).
   • Make sure that your headphones are not connected to other devices, and that your device is not connected to other Bluetooth devices.
   • We recommend that you press and hold both the Vol+ and Vol- buttons simultaneously for 5 seconds. Your headphones’ pairing history will be cleared and will automatically enter the “discoverable” mode.
   • If they are still not connecting, restart your device to connect.

3. My Android device successfully connects to the headphones, but the headphones don’t play music.
   After pairing successfully. on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on.

4. My Android device successfully connects to the headphones, but there is no sound from the headphones while making phone calls.
   After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio’ option is on.

5. The Bluetooth connection is not stable, causing some interruptions.

   • Try shortening the distance between your headphones and device. Avoid solid barriers in between.
   • Please keep away from strong interference sources, such as Wi-Fi and GPRS.
   • Please make sure the Bluetooth antenna of your device is not blocked.

6. While using third party music/video player apps, some in-line remote control functions do not match those in the manual.
   Your operating system and the third party music/video player apps may have different settings for the in-line remote control functions. We recommend that you use the music/video player apps that your device has originally provided.

7. I adjusted the in-line remote control to the maximum volume, but the actual volume still sounds low.
   In different operating systems, especially some Android systems, the headphones and your device have separate volume control systems. Please adjust the volume controls on both the device and the headphones according to your preference.

Note: For more detailed product FAQs, please visit the product support section under www.lmore.com

WEEE

Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage, it must be collected and disposed of separately to protect the environment.

Your 1 MORE retailer will advise you of the correct way of disposal in your country.

Safety Caution

Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.

CE

Hereby, 1 MORE, declares that wireless headphone is in compliance with the essential requirement and relevant provisions of Directive 2014/53/EU.

FCC

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not exi responsible for compliance could voic the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>