HIFIMAN TWS800 Twister 6 Earphone Owner’s Manual
- June 6, 2024
- HIFIMan
Table of Contents
Innovating the Art of Listening
TWS 800
Owner’s Guide
Accessories
Overview
1 | Music & Call Button |
---|---|
2 | Microphone |
3 | Indicator Light |
Power on/off
The earbuds will automatically power on when removed from the charging case.
The earbuds will automatically power off and begin recharging when you return
them to the charging case.
Attention: When you first use the product, please allow the case and
earbuds to charge for 1.5 hours before use.
To turn on the earphone without using the charging box, press the button for 2
seconds. Its blue light will flash and you can hear “power on” when you wear
it. To turn off the earphone without the charging box, press the button for 4
seconds. The light will turn red for 1 second, after which you will hear
“power off “.
Bluetooth Pairing
-
On removing the earbuds from the charging case the earbuds will enter pairing mode and the LED will flash red and blue.
Tips:
You have 5 minutes to connect the earbuds to your device, otherwise, the earbuds will exit the pairing mode and automatically power off. (You can re- enter pairing mode by replacing earbuds in the case and then extracting once more.) -
Open the Bluetooth connection menu on your device, select: HIFIMAN TWS800. Once paired, you will hear “Connected.” The red and blue LEDs will stop flashing.
Use Left Earbud Only
Leave the right earbud in the charging case. The left earbud will enter
one-sided mode. The TWS800 will automatically to return to stereo if and when
the right earbud is removed from the charging case.
Use Right Earbud Only
Leave the left earbud in the charging case.
The right earbud will automatically enter one-sided mode. To return to stereo,
simply remove the left earbud from the charging case.
Wear
Try all the ear tips to find the best fit. It is important to get a complete seal to achieve the best performance.
Insert the
earbuds into your ear canal and twist toward the back of your neck in order to
achieve the best fit and performance.
Tips: When first using the TWS800, take some time to try on the various ear tips to see which offer the best fit and performance.
Music & Calls
Music
- Press once to pause, press again to resume play.
- Double-press the left earbud to reduce volume, double-press the right earbud to increase volume.
- Triple-press the left earbud to turn to the next track, triple-press the right earbud to turn to the previous track.
Calls
Calls are initiated and answered with either the left or right earbud.
Press once to accept an incoming call, or press and hold 2 seconds to reject.
- Press once to end the call.
- When you are talking on the phone and receive another call: Press once to end the first call and answer the new coming call, press and hold for 2 seconds to switch calls between the old/new call.
*Press and hold two seconds to activate the phone’s voice control.
Charging
Charge the Earbuds
Place the earbuds in the charging case and close the lid. The red light will
turn on when charging, and a blue light will appear when finished.
Charge the Charging Case
Insert a Type-C USB cable into the socket to charge the battery case and
earbuds. One to four LED lights will appear, indicating the case and earbuds.
Up to four will be visible: One light indicates minimal power remains, and
four buds indicate charging is complete.
User Guide
Charge Level
When the battery power is low or entirely drained, the words “Battery Low” will be heard every 20 seconds.
Charging Case Status Light
charging | One-to-four lights are visible while charging |
---|---|
Full charged | Steady light |
Note:
Please do not remove or replace the internal battery, doing so will void your
warranty automatically.
Reset the Earphones
When the earphones are turned off, press the button for 10 seconds, during
this period, the red/blue lights will flash for two times. After that, the
earphones reset successfully.
Basic Specification of Earbud
Earbud size | 25.620.227.6mm |
---|---|
Single head weight | 6.9g |
Earbud charging time | 1H |
Work voltage | 5V |
Standby time of Earbud | 120H |
Music time | 4.5H |
Call time | 3.5H |
Bluetooth version | Bluetooth 5.0 |
RF transmit power | 3-4.2dbm |
Transmission range (Hz) | 2.40GHz-2.48GHz |
Transmission distance | >10m, up to 35m (depending on the environment) |
Audio coding format | HFP 1.7, HSP 1.2, A2DP 1.3, AVRCP 1.6, SPP 1.2 and PBAP |
1.0
Specification of Charging Case
Size | 76.7 48.338.6mm |
---|---|
Weight | 74.4g |
Charging port | Type-C USB |
Base charging (full) provides power to the earbud | 6 times |
Charging time | 2 H |
Safety Information
- Avoid listening to high volumes. Failure to do so may lead to hearing loss.
- Do not use the TWS800 when driving a car, cycling, near traffic, or in any environment that requires full attention.
- To maximize battery life, disconnect the USB cable after
- Please note that If using TWS800 to watch videos or for gaming, the audio will be slightly delayed. This is unavoidable due to the latency of Bluetooth transmissions.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure conditions without RF striction.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
HIFIMAN Limited Warranty
HIFIMAN warrants this product to be free of defects in material or workmanship for a period of one year from the date of original retail purchase. If your product is found to be defective during the warranty period, HIFIMAN will, at its sole option, either repair the product or replace the product with a new or factory reconditioned or substantially equivalent model. This limited warranty does not apply to any defects attributable to damage beyond the reasonable control of HIFIMAN including damage caused by abuse, misuse, misapplication or modifications performed by anyone other than HIFIMAN.
If your product is under warranty and a problem appears, please contact HIFIMAN customer service or your authorized dealer. If necessary, and at our discretion, we will provide a warranty repair or replacement of your product.
Caution: do not disassemble or modify the product in any way. Tampering with or modifying your HIFIMAN product will void its warranty.
This Limited Warranty does not apply to :
- Defective or discolored parts if the damages are caused by fluids, dirt, missing keys, broken plastic parts or improper use.
- Damage caused by misuse of another product.
- Use of the product for other than its normal intended use, including, without limitation, failure to use the product in accordance with the supplied “Owner’s Guide”
- Damage caused by accident, abuse, neglect or misuse.
- If you do not have a valid dated receipt showing proof of purchase.
- Damage caused by services/repairs or other modifications to the system carried out by anyone other than HIFIMAN or an authorized HIFIMAN distributor or dealer.
- Damage caused by self-repair or if the unit has been disassembled or modified in any way.
HIFIMAN greatly desires your satisfaction and will do everything reasonable to achieve that. If you have any questions or concerns with your product, simply contact your authorized dealer or HIFIMAN directly (if purchased from us) and explain the issue in detail. Should a return be required, an RMA# will be issued. Return shipping to HIFIMAN or authorized service facility will be at the owner’s expense.
The warranty applies to the first purchaser and is not transferable.
For any further information or questions, please contact your authorized HIFIMAN dealer, or email us directly at
FACEBOOK
Scan QR Code to join HIFIMAN on Facebook
https://www.facebook.com/HiFiMANElectronics
facebook.com/hifimanelectronics
twitter.com/hifimanofficial
www.hifiman.com