Alcatel Temporis IP10 Corded SIP Phone User Guide
- June 6, 2024
- Alcatel
Table of Contents
Temporis IP10
QUICK START GUIDE
| Status indicator | Redial | Programmable key |
|---|---|---|
| Call Hold / Resume | Handsfree mode | Ringing: mute ringer In conversation: |
mute /
unmute microphone
Idle mode / ringing: ringervolumen control In conversation: speaker/earpiece
volumen control
Phone web interface
-
To find out your phone’s IP address long-press # key; the IP address will be readout
-
Open a web browser on your computer.
Enter http://and the IP address in the address bar and validate. -
Default login and password are « admin/admin » for an administrator.
-
The minimum required configuration is one sip account. Check the administrator guide for details.
Making a call
Direct dialing: Lift the handset and enter the number. To end the call hang up the handset. Handsfree: Enter the number and press , or vice versa. Press again to end the call.
Accepting a call
Lift the handset or press .
Redial
Lift the handset and press to redial last **** dialed number.
Putting a call on hold
To put a call on hold press . To resume the call press again.
Speed dial
Configure up to 10 speed dial memories on the web interface.
To dial out, long press the corresponding digit key (0 to 9)
Installation
Package content:
Handset, base, handset cord, Quick start guide
Wall mounting
– Drill 2 holes on the wall, with 131.2 or 162.2mm vertical separation
– Insert screws and anchors (not included)
– Plug phone connections
– Align phone mounting holes with screws and slide down
Declaration of
conformity for the European Community ATLINKS declares that Temporis IP10
telephone complies with the basic health, safety, and environmental
requirements in all relevant EU directives. You can download the declaration
of conformity from the following address: www.alcatel-
business.com.
The CE logo shown on the products indicates that they are compliant with the
basic requirements of all the applicable directives.
Environment
This symbol means that your inoperative electronic appliance must be collected
separately and not mixed with the household waste. The European
Union has implemented a specific collection and recycling system for which
producers’ are responsible.
This appliance has been designed and manufactured with high-quality materials
and components that can be recycled and reused.
Electrical and electronic appliances are liable to contain parts that are
necessary in order for the system to work properly but which can become a
health and environmental hazard if they are not handled or disposed of in the
proper way. Consequently, please do not throw out your inoperative appliance
with household waste. If you are the owner of the appliance, you must deposit
it at the appropriate local collection point or leave it with the vendor when
buying a new appliance.
(a) – If you are a professional user, please follow your supplier’s
instructions.
(b) – If the appliance is rented to you or left in your care, please contact
your service provider.
Please help us protect the environment in which we live!
Notice of copyright and trademarks
Copyright © 2020 ATLINKS. All rights reserved. ATLINKS reserves the right to
change the technical specifications of its products without prior notice, so
as to make technical improvements or respect new regulations.
Alcatel and Temporis are registered trademarks. Alcatel logo and Alcatel name
are trademarks of Alcatel-Lucent and used under license by ATLINKS.
ATLINKS
147 avenue Paul Doumer
92500 RUEIL-MALMAISON France
RCS Nanterre 508 823 747
Model : Temporis IP10
A/W No.: 10002309 Rev.1 (EN/DE/FR/ES)
Printed in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>