alcatel IK42 4G USB Dongle User Guide
- June 4, 2024
- Alcatel
Table of Contents
alcatel IK42 4G USB Dongle
Safety and Use
We recommend that you read this chapter carefully before using this device. The manufacturer disclaims any liability for damage, which may result because of improper use of this device or from use contrary to the instructions contained herein.
- Do not switch on your device when its use is prohibited or when using the device may cause interference or danger.
- Follow rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatuses.
- Switch off your device while on an aircraft. The device may cause interference to aircraft control signals.
- Switch off your device near high-precision electronic devices. The device may affect the performance of these devices.
- Do not attempt to disassemble your device or its accessories. Only qualified personnel are allowed to service or repair the device.
- Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them.
- Do not subject your device to high temperatures or use it in a place with flammable gas such as a petrol station.
- Keep your device and its accessories away from children. Do not allow children to use your device without supervision.
- Do not place your device or its accessories in containers with a strong electromagnetic field.
- Observe the laws or regulations on device use. Respect others’ privacy and legal rights when using your device.
It is recommended that the equipment only be used in an environment where the temperature is between -10°C and 55°C and humidity is between 5% to 95%.
Package Contents
Getting to Know Your Modem
- Cap
- USB interface
- Indicator LED
- SIM Card Slot
- TS9 external antenna interface x 2
How to start your modem
- Step 1: Insert SIM card into the device.
- Step 2: Plug into Computer.
- Step 3: Software will auto-install. Once installation is complete, your modem is ready for use.
LED Indicator Description
How to send AT Command in Windows PC for IK42
-
Open the AT Command tool.
Select the language you want and configure the port via the port’s drop down menu.
Select the correct port:
-
Send AT Command in the input window, and then tap “SEND”
The result is displayed in the following window:
References
- Home | Alcatel Mobile | Alcatel 1S | Alcatel 1X | Alcatel 3
- Home : Alcatel Mobile – Canada
- Alcatel Mobile | Smartphones, Tablets & Connected Devices : Alcatel Mobile
- Home | Alcatel Mobile | Alcatel 1S | Alcatel 1X | Alcatel 3
- EU doc - Alcatel
- Accessibility & Compliance : Alcatel Mobile – Canada
- Accessibility & Compliance : Alcatel Mobile
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>