How to Connect TP-Link Extender: RE230/RE330 User Guide

The TP-Link Range Extender RE230/RE330 User Guide provides detailed instructions on how to connect the extender to your router and extend your Wi- Fi coverage. This guide includes three setup methods: via the Tether App, a web browser, or the WPS button. The Tether App is available for download from the Apple App Store or Google Play, and users can log in with their TP-Link ID or create a new account. The guide also includes tips on how to relocate the extender for optimal Wi-Fi performance and access extender settings via the Tether App or web browser. Additionally, the guide provides information on One Mesh technology, which allows TP-Link routers and extenders to form one unified Wi-Fi network. Users can also find answers to frequently asked questions and safety information. Overall, this user guide is a comprehensive resource for users looking to set up and use their TP-Link Range Extender RE230/RE330.

 _ **tp-link Range Extender RE230/RE330 User Guide**_

https://www.tp-link.com/support/setup-video/

1 Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on. Note: For safety, only plug the extender in the direction as shown below.

2 Set Up

Via the Tether App

1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code. https://www.tp-link.com/app/qrcode/?app=tether
2. Tap the button and select Range Extender. Note: If you cannot find your device, please refer to FAQ > Q1.
3. Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
4. Follow app instructions to complete the setup. The LED should turn solid on, indicating successful connection to your router.

Note: If the LED does not turn solid on, please refer to FAQ > Q2. More Setup Methods

• Via a Web Browser

1. Connect your computer or smartphone to the extender’s network TP-Link Extender.
2. Visit http://tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
3. Follow web instructions to complete the setup.

• Via the WPS Button

1. Press the WPS button on your router.
2. Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid on, indicating successful connection.
3. If the extender connects to a dual-band router, repeat steps 1 and 2 to connect to the other band.

Extended Network Names: Router’s network name with _EXT at the end or Same as your One Mesh router (See back for One Mesh details) Passwords: Same as your router For more details, please refer to the user guide at https://www.tp-link.com/support/download.

3 Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid white. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to Tools > Location Assistant, or simply scan the QR code to visit https://www.tp-link.com/support/faq/3103/. Enjoy! Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extended network is the same as your host router. Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user guide at https://www.tp- link.com/support/download.

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect host network, change extended network settings and more. Note: If your extender and router use the same network name, Method 1 is recommended. Method 1: Via the Tether App

1. Connect your smartphone to the extender`s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.

LED Explanation

One Mesh™ with Seamless Roaming TP-Link One Mesh router and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to One Mesh’s seamless coverage. To check full list of TP-Link One Mesh devices, scan the QR code, or visit https://www .tp-link.com/One-Mesh/compatibility.

SPECIFICATIONS

Same as your One Mesh router
Passwords| Same as your router
Relocation| Plug in halfway between router and Wi-Fi dead zone, within range of router
Access Extender Settings| Via Tether App or Web Browser
LED Explanation| One Mesh technology with seamless roaming
FAQ| Answers to frequently asked questions
Safety Information| Keep away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use where wireless devices are not allowed.

FAQ (Frequently Asked Questions))

Q1. What should I do if the Tether app cannot find my device? Try another method by following the steps below:

1. Connect your smartphone to the extender’s network TP-Link Extender.
2. Launch the Tether app, and select your extender. Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, turn off your cellular data.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
• If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
• Try setting it up via the WPS button.
• Reset the extender and go through the configuration again. If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

• With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot.

If you need more setup help, please visit https://www.tp-link.com/support/faq/3074/, or simply scan the QR code. Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www .tp-link.com/support/ukca To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com. If you have any suggestions or needs for our product guides, you are welcome to email techwriter@tp-link.com.cn. For technical support, replacement services, user manuals and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. AC750/AC1200 Wi-Fi Range Extender Model: RE230/RE330

FAQS

What are the three setup methods for connecting the TP-Link Range Extender RE230/RE330 to my router?

The three setup methods are via the Tether App, a web browser, or the WPS button.

How do I access extender settings after setup?

You can access extender settings via the Tether App or a web browser.

How do I optimize my extender’s location for better signal quality?

Plug in the extender about halfway between your router and the Wi-Fi dead zone. Wait for about 2 minutes until the LED turns solid white. If it doesn’t, relocate the extender closer to the router to achieve better signal quality. Access extender settings via the Tether app and go to Tools > Location Assistant for more tips.

Can I use the extender in Access Point mode?

Yes, you can set up the extender in Access Point mode to transform your existing wired network to a wireless one.

What is One Mesh technology?

One Mesh technology allows TP-Link routers and extenders to form one unified Wi-Fi network for seamless coverage and faster speeds.

How do I access TP-Link Community or technical support?

Visit https://community.tp-link.com or https://www.tp-link.com/support for technical support, replacement services, user manuals, and other information.

References

• 域名售卖
• Trying to Configure the Range Extender? | TP-Link
• TP-Link Community
• CE Regulatory Compliance | TP-Link
• TP-Link OneMesh Devices
• TP-Link Product Support - Wireless Networking Equipment Support
• Range Extender Setup Help | TP-Link
• How to place your wireless Range Extender for optimal reception and performance | TP-Link
• | TP-Link United Kingdom
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>