icron USB 2.0 RG2312 User Guide
- June 6, 2024
- icron
Table of Contents
Icron USB 2.0 RG2312 Quick Start Guide
2-Port USB 2.0 100m (330 ft) CAT 5e/6/7
Extender System with Flexible Power
Product Contents
- USB 2.0 RG2312 Local Extender
- USB 2.0 RG2312 Remote Extender
- USB 2.0 Cable
- AC Power Adapter
- Country Specific Power Cord
- Quick Start Guide
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
-
Place the units where desired, and connect the CAT 5e/6/7 (solid core) extension link cabling into the Link ports (RJ45) of the Local and Remote Extenders.
-
Connect the power adapter into your desired unit – Local Extender or Remote Extender.
Note: Flexible power is different from Power over Ethernet (PoE). Ensure the CAT 5e/6/7 cable is only connected between the Local and Remote Extenders. -
Connect the Local Extender into your computer using the included USB 2.0 cable.
-
Attach your USB device(s) to the Remote Extender.
Certification and Compliance
FCC Radio Frequency Interference Statement Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
CE Statement
We, Icron Technologies Corporation, a Maxim Integrated brand, declare under
our sole responsibility that the USB 2.0 RG2312, to which this declaration
relates, is in conformity with European Standards EN 55024, EN 55032, EN
61000, and RoHS Directive 2011/65/EU + 2015/863/EU.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement
The European Union has established regulations for the collection and
recycling of all waste electrical and electronic equipment (WEEE).
Implementation of WEEE regulations may vary slightly by individual EU member
states. Please check with your local and state government guidelines for safe
disposal and recycling or contact your national WEEE recycling agency for more
information.
Product Operation and Storage
Please read and follow all instructions provided with this product and
operate for intended use only. Do not attempt to open the product casing as
this may cause damage and will void warranty. Use only the power supply
provided with this product. When not in use, product should be stored in a dry
location between -20°C and 70°C.
Icron Technologies Corporation
A Maxim Integrated Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC
V5C 5T5, Canada
+1 604 638 3920
Copyright © 2020 Icron | A Maxim Integrated Brand.
All rights reserved. Information contained herein is
subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>