CELESTRON 93612 Ultima Pan Tilt Head Tripod User Manual
- June 6, 2024
- Celestron
Table of Contents
CELESTRON 93612 Ultima Pan Tilt Head Tripod
INTRODUCTION
Thank you for purchasing your Celestron Ultima Pan/Tilt Head Tripod. This tripod will provide you with years of enjoyment and faithful service. Before using your tripod for the first time, read these instructions carefully to ensure proper use and care.
FEATURES
(A) Quick release plate
(B) Quick release plate lock lever
(C) Bubble level
(D) Tilt control knob
(E) Panning tension knob
(F) Pan/tilt handle
(G) Center column lock knob
(H) Aluminum legs
(I) Leg lock levers
(J) Rubber feet
(K) Pan/tilt head
(L) Center column adjustment handle
(M) Center column
(N) Balance hook
USING YOUR TRIPOD
The Ultima tripod will provide you with a stable platform for your spotting
scope, binocular or camera in the field. With three leg sections and an
adjustable center column, the tripod can be set in multiple configurations to
get the exact height needed for your terrain and conditions. The Ultima is the
perfect tripod for any outdoor excursion from bird watching to stargazing and
everything in between.
ADJUSTING THE PAN/TILT HEAD
The pan/tilt head of the Ultima tripod has two control knobs. To pan with
the tripod, loosen the panning tension knob until the head moves smoothly
around the horizontal plane. To tilt the mounting platform, loosen the tilt
control knob and adjust the mounting platform to the desired position. Once
the tripod is in position, tighten the tension knobs to secure.
QUICK RELEASE PLATE
The quick release plate allows you to quickly attach your optics to the
tripod. To remove the quick release plate from the pan/tilt head, push the
lock lever to the left until it locks.
Attach the quick release plate to any device or optic with a ¼”-20 mount
thread by placing the front of the quick release plate into the head. Next,
slide the plate into place.
When the plate is fully seated, press down. The lock lever will automatically
lock the plate into place.
ADJUSTING THE CENTER COLUMN
The center column of the Ultima tripod can be extended to raise the tripod
head when additional height is needed. To extend the center column, loosen the
center column lock knob and move the center column to the desired height. Once
the head is in place, tighten the center column lock knob to secure.
ADJUSTING THE LEG LENGTH
The length of each leg section of the Ultima tripod can be adjusted. To
adjust the length of a leg section, release the leg lock lever and extend the
leg section to the desired height. Press the leg lock lever back into position
to secure it. Repeat the process for all leg sections. The legs will extend to
a maximum of three sections.
BALANCE HOOK
The balance hook on the Ultima tripod can be used to provide added
stability in windy conditions. Hang a heavy object, such as a bag, from the
hook.
NOTE: The maximum load is 8.8 lb (4 kg).
BUBBLE LEVELS
To ensure that the tripod legs and pan head are level, reference the bubble
levels on the Ultima tripod.
CARE AND STORAGE
Your Celestron tripod will provide you years of dependable service if it is cared for and stored properly.
- Protect the tripod from impact and do not force any of the moving parts beyond their limits.
- Do not exceed the maximum specified load.
- Store your tripod in a cool, dry place whenever possible.
- Do not leave the product in the sun for long periods of time. Avoid hot environments, like the inside of a car. Do not place the tripod near anything that generates heat as this may cause damage.
- Clean your tripod with a mild detergent and a soft cloth. Wipe away any dust, dirt or water on the tripod or inside moving parts as soon as possible to prevent damage.
SERVICE AND REPAIR
If warranty problems arise or repairs are necessary, U.S. and Canadian residents should contact Celestron Technical Support. If you live outside of these countries, contact the dealer that sold you your tripod or the Celestron distributor in your country. You’ll find a full list of our distributors at www.celestron.com
WARRANTY
Celestron warrants your tripod to be free from defects in materials and
workmanship for two years. Celestron will repair or replace the tripod which,
upon inspection by Celestron, is found to be defective in materials or
workmanship and within the definitions of the limits described below.
This warranty does not cover products that have been subject to abuse, misuse,
physically damaged, altered, or had unauthorized repairs or modifications.
This warranty does not cover defects due to normal wear and tear and other
conditions.
This warranty is valid to USA and Canadian customers who have purchased their
tripod from an authorized Celestron dealer in the USA or Canada. For products
purchased outside of the USA or Canada please contact your local Celestron
Distributor or authorized Dealer for applicable warranty information.
Additional warranty information and eligibility details can be found on the
Celestron website.
This product is designed and intended for use by those 14 years of age and
older. Product design and specifications are subject to change without prior
notification.
For complete specifications and product information:
www.celestron.com
celestron.com/pages/technical-support
References
- Technical Support | Celestron
- Celestron - Telescopes, Telescope Accessories, Outdoor and Scientific Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>