tp-link HS100 Wi-Fi Smart Plug with Energy Monitoring User Guide

User’s Manual

Wi-Fi Smart Plug HS100
Wi-Fi Smart Plug with Energy Monitoring HS110
© 2020 TP-Link 1910012937 REV 3.0.0

Chapter 1. Introduction

1.1 Product Overview
What This Product Does
The Wi-Fi Smart Plugs make it easy to control your lights or household electronic devices anywhere in the world with the TP-Link Kasa Smart app on your smartphones or tablets.

Schedule and Away Mode
With Kasa’s Schedule and Away Mode, you can automate your lights or plugged-in appliances to turn on and off according to specific schedules, to simulate occupancy when you’re away from home. In addition, the countdown timer enhances safety by automatically switching off the running household appliances after a preset time.

Compatible with Amazon Echo
You can pair the Smart Plugs with Amazon Echo for voice control.

Compatible with Android, iOS
The free Kasa Smart app lets you run them from any Android (5.0 and higher) or iOS (iOS 10 and higher) smartphone.

Energy Conservation (for HS110 only)
You can efficiently conserve energy and save money while using Smart Plugs to control your space heaters and fans. The Smart Plug tracks your device’s power consumption in real-time and has weekly and monthly summaries.

1.2 Main Features

• Control devices connected to the Smart Plug wherever you have Internet using the free Kasa Smart app on your smartphone.
•  Schedule the Smart Plug to automatically power electronics on and off as needed, like setting lights to come on at dusk or turn off at sunrise.
•  Analyze your plugged-in device’s real-time and historical power consumption. (for HS110 only)
•  Turn your devices on and off at different times to give the appearance that someone is home.
•  Amazon Echo (sold separately) lets you control devices connected to the Smart Plugs just using your voice.

1.3 Panel Layout

• Image may differ from actual product due to different regional power specifications. Here we use the E.U. version as an example.

the Wi-Fi LED blinks amber and green to
initiate the app-config process.Press and hold for 10 seconds or until
the Wi-Fi LED blinks amber rapidly to
factory reset.
(Wi-Fi LED)| Blink| Amber and green: App configuring process.
Green: Connecting to the network.
Amber: Factory resetting.
On| Green: Network connection established.
Amber: Rebooting.
Red: No network connection.
(Power LED)| On
Off| The Smart Plug is switched on.
The Smart Plug is switched off.

Supported Load Types:
Coffee Maker: 800 W
Desk Lamp: 235.2 W
LCD: 270 W
Heater: 1500 W
Humidifier: 260 W
Iron: 1500 W
Toaster: 850 W
Tower Fan: 50 W

Chapter 2. Quick Start

1. Download the Kasa Smart app from the App Store or Google Play.
   

2. Connect your mobile device to a 2.4GHz Wi-Fi network.
   Note: The Smart Plug only supports 2.4GHz networks.
   

3.  Launch Kasa and follow the app instructions to connect the Smart Plug to your network.

Troubleshooting

Frequently Asked Questions

1. What devices can I control with the Smart Plug?
   You can control lights, electronics, and small appliances such as humidifiers, air purifiers, portable heaters, and fans.

2. What should I do when I can’t control the connected device?
   • Check that the connected device is switched to ON.
   • Make sure your mobile device and the Smart Plug are on the same Wi-Fi network.
   • Enable Remote Control to control the connected device from outside your home.

3.   What should I do when the Wi-Fi LED is lit red?
   A red LED light indicates no network connection.
   • Check your network connectivity.
   • Relocate the Smart Plug. Avoid placing the Smart Plug near potential sources of radio signal interference.
   • Repeat the app configuring process.
   • Factory reset the Smart Plug and try to add it again.

4.   How do I pair the Smart Plug with Amazon Echo?
   Visit www.tp-link.com/en/faq-944.html or within the Kasa Help section for pairing instructions.

FCC compliance information statement

Product Name: Wi-Fi Smart Plug / Wi-Fi Smart Plug with Energy Monitoring
Model Number: HS100 / HS110
Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference.
2.  This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

We, TP-Link USA Corporation, have determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY(the maximum transmitted power)
2412MHz—2472MHz(20dBm)

EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce.

RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

The device complies with RF specifications when the device is used at 20 cm from your body.

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference.
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements

Equipment name

HS100

HS10

| Type designation (Type)

Wi-Fi Smart Plug

Wi-Fi Smart Plug with Energy Monitoring

---|---
Unit

| Restricted substances and their chemical symbols
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| Hexavalent chromium

(Cr+6)

PCB| 0| 0| |
| 0| 0| | 0
| –| 0| | 0
| –| 0| | 0
Note 1: “Exceeding 0.1 wt %”  and    “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of the present condition.

Note 2: ” 0 ” indicates that the percentage content of the restricted substance does not exceed the percentage of the reference value of presence.

Note 3: The  “—” indicates that the restricted substance corresponds to the exemption.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
•  The socket outlet shall be installed near the equipment and shall be easily accessible.
•  For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

The user has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.

www.tp-link.com

References

• Link: Simple, secure one-click payments
• How to make my TP-Link Kasa Device work with Amazon Alexa
• TP-Link Product Support - Wireless Networking Equipment Support
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>