Husqvarna 320iB Leaf Blower Owner’s Manual

320iB

Introduction

Product description
Husqvarna 320iB is a blower model with an electrical motor. We have a policy of continuous product development and therefore reserve the right to modify the design and the appearance of products without prior notice.

Intended use
This product is designed for blowing leaves and other debris from lawns, pathways, asphalt roads, and the like. The product is designed for household use.

Product overview

1. Blower nozzle
2. Power trigger
3. Handle
4. ON/OFF position
5. Power trigger cruise settings control (Cruise)
6. Supports
7. Operator’s manual
8. Battery charger
9. Cord
10. Battery release buttons
11. Battery
12. Warning indicator (ERROR LED)
13. Battery indicator button
14. Battery status

Symbols on the product

WARNING! This product is dangerous. Injury or death can occur to the operator or bystanders if the product is not used carefully and correctly. To prevent injury to the operator or bystanders, read and obey all safety instructions in the operator’s manual.

Please read the operator’s manual carefully and make sure that you understand the instructions before use.

Use the approved eye protection.

ON/OFF switch.

The rating plate shows the serial number. yyyy is the production year, WW is the production week and xxxxx is the sequential number.

Symbols on the battery and/or on the battery charger

Recycle this product at a recycling station for electrical and electronic equipment. (Applies to Europe only)

Fail-safe transformer.

Use and keep the battery charger indoors only.

Double insulation.

Proposition 65

WARNING
This product contains or emits a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

Product liability

Safety

Safety definitions
Warnings cautions and notes are used to point out especially important parts of the manual.

WARNING: Used if there is a risk of injury or death for the operator or bystanders if the instructions in the manual are not obeyed.

CAUTION: Used if there is a risk of damage to the product, other materials, or the adjacent area if the instructions in the manual are not obeyed.

Note: Used to give more information that is necessary in a given situation.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

READ ALL INSTRUCTIONS
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

WARNING: To Reduce The Risk Of Electric Shock – Do Not Expose To Rain – Stored Indoors.

• Do not charge the product outdoors.
• Only use the charger supplied by the manufacturer to recharge.
• Do not incinerate the appliance even if it’s severely damaged.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
• Only use the product as described in this manual.
• Only use the manufacturer’s recommended attachments.
• If the appliance is not working as it should have been dropped, is damaged, is left outdoors, or dropped into water, return it to a service center.
• Do not handle chargers, including charger plug, and charger terminals with wet hands.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce the airflow.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

General power tool safety warnings Check before starting

• Inspect the working area. Remove all loose objects, such as stones, broken glass, nails, steel wire, string, etc. that could be thrown out.
• Always remove the battery to prevent the machine being started by accident. Always disconnect the battery before any maintenance on the machine.
• Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.
• Only use original spare parts.
• The machine operator must ensure that no people or animals come closer than 15 meters while working. When several operators are working in the same area the safety distance should be at least 15 meters.
• Do an overall inspection of the machine before use, see the maintenance schedule.
• National or local regulations may regulate the use. Comply to given regulations

Personal safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Keep bystanders away.
• This appliance is not intended for use by a person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Never allow children or other persons not trained in the use of the machine and/or the battery to use or service it. Local laws may regulate the age of the user.
• Keep unauthorized persons at a distance. Children, animals, onlookers, and helpers should be kept outside the safety zone of 15 m (50 ft.). Stop the machine immediately if anyone approaches.
• Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgment, or your coordination.
• Wear personal protective equipment. See instructions under the heading “Personal protective equipment”.
• Always remove the battery when passing the machine to another person.
• Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or hazards.

Power tool use and care

• Never use a machine that has been modified in any way from its original specification. Never use the machine near explosive or flammable materials.
• Never use a machine that is faulty. Carry out the safety checks, maintenance, and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.
• Only use original spare parts.
• Always ensure that ventilation openings are kept clear of debris.
• All covers, guards, and handles must be fitted before starting.
• Only use the machine in daylight or in other well-lit conditions.
• Never use the machine in bad weather, for instance in fog, in rain, damp or in wet locations, strong winds, intense cold, risk of lightning, etc. Extremely hot weather may cause overheating of the machine. Operation in bad weather is tiring and can lead to dangerous conditions, for instance, slippery surfaces.
• If the machine starts vibrating abnormally, stop the machine and remove the battery.
• Walk, never run.

General safety instructions

WARNING: Read the warning instructions that follow before you use the product.

• Incorrect or careless use of the product can turn it into a dangerous tool that can cause serious or even fatal injury to the operator or others. You must read and understand the contents of this operator’s manual.
• Under no circumstances may the design of the product be modified without the permission of the manufacturer. Never use a product that has been modified in any way from its original specification and always use original accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.
• This product produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this product.

Safety instructions for operation

WARNING: Read the warning instructions that follow before you use the product.

• If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all
  usage that you consider to be beyond your capability.

• Never use the product in bad weather, for instance in fog, in the rain, strong winds, intense cold, etc.

• Do not allow children to use or be in the vicinity of the product. Since the product is easy to start, children may be able to start it if they are not kept under full surveillance. This can mean a risk of serious personal injury. Disconnect the battery when the product is not under close supervision.

• Ensure that no people or animals come closer than 15 meters (50 ft.) while you work. When several operators are working in the same area the safety distance should be at least 15 meters. Otherwise, there is a risk of serious personal injury. Stop the product immediately if anyone approaches. Never swing the product around without first checking behind you to make sure that no one is within the safety zone.

• Make sure that you can move and stand safely. Check the area around you for possible obstacles (roots, rocks, branches, ditches, etcetera) in case you have to move suddenly. Take great care when you work on sloping ground.

• Keep a good balance and a firm foothold at all times. Do not overreach.

• Listen out for warning signals or shouts when you wear hearing protection. Always remove your hearing protection as soon as the product stops.

• Show consideration to persons in your surroundings by avoiding using the product at unsuitable times, such as late in the evening or early in the morning.
  Follow local regulations and ordinances.

• Use the product with the lowest possible airflow. It is seldom necessary to use full airflow, and many work procedures can be done at half airflow. A lower
  airflow means less noise and less dust, and it is also easier to keep control over the rubbish collected together/moved.

• Use a rake or a brush to release rubbish stuck to the ground.

• Hold the opening of the blower as close to the ground as possible.

• Observe your surroundings. Direct the product away from persons, animals, play areas, cars, etc..

• Minimize the blowing time by lightly wetting dusty areas or using spray equipment.

• Be aware of the wind direction. Work with the wind to make your work easier.

• Stop the product and remove the battery if the product starts to vibrate abnormally.

• Using the blower to move large piles is time-consuming and creates unnecessary noise.

• Clean up afterward. Make sure that you have not blown rubbish into someone’s garden.

• Do not run with the product.

• The powerful currents of air can move objects at such a speed that they can bounce back and cause serious eye injuries.

• Do not direct the airflow towards people or animals.

• Stop the motor before you assemble or dismantle accessories or other parts.

• Keep all parts of your body away from hot surfaces.

• Never put the product down when it is activated unless you have it in clear sight.

• The blower must not be used while on a ladder or scaffolding.

• Do not use the product unless you are able to call for help in case of an accident.

• Watch out for thrown objects. Stones, rubbish, etc., can be thrown up into the eyes causing blindness or serious injury.

• Use a residual-current device (RCI) for increased security. A residual-current device is fitted to protect operators in case an electrical fault should occur.

• This product is renowned for its low vibration load. Overexposure to vibration can lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin color or condition. These symptoms normally appear in the fingers, hands, or wrists.

• Only use the product for the purpose it was intended for.

• It is not possible to cover every conceivable situation you can face. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert
  before continuing.

Personal protective equipment

WARNING: Read the warning instructions that follow before you use the product.

• Always use approved personal protective equipment when you use the product. Personal protective equipment cannot fully prevent injury but it decreases the degree of injury if an accident does occur. Let your dealer help you select the right equipment.
• Long-term exposure to noise can result in a damaged hearing. In general, battery-powered products are relatively quiet but damage can result from a combination of noise level and long usage. recommends that operators use hearing protectors when using products for a longer coherent time of the day. Continual and regular users should have their hearing checked regularly.

WARNING: Hearing protectors limit the ability to hear sounds and warning signals.

• Use approved eye protection. If you use a visor, you must also use approved protective goggles. Approved protective goggles must comply with the ANSI Z87.1 standard in the USA or EN 166 in EU countries.

• Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not wear jewelry, short pants, sandals, or go with bare feet. Put your hair up safely above shoulder level.

• Keep first aid equipment close at hand.

• A breathing mask should be used when there is a risk of dust.

Safety devices on the product

WARNING: Read the warning instructions that follow before you use the product.

In this section the product’s safety features, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See instructions under the heading Product overview on page 2 to find where these parts are located on your product.
The life span of the product can be reduced and the risk of accidents can increase if product maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer.

WARNING: Never use a product with defective safety components. The product’s safety equipment must be inspected and maintained as described in this section. If your product fails any of these checks, contact your service agent to get it repaired.
CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and services. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

To do a check of the ON/OFF switch
1. Make sure that the machine is operated and stopped when the ON/OFF switch lever is moved to the ON and OFF positions.

To do a check of the power trigger

WARNING: The product is a low vibration load. Do not overexposure to vibration. For persons who have impaired circulation, it can cause circulatory or nerve damage, such as numbness, prickling, loss of feeling or strength, and changes in skin color. Speak to your doctor if you experience such symptoms in the fingers, hands, or wrists.

1. Make sure the throttle operates easily.

Battery safety

WARNING: Read the warning instructions that follow before you use the product.

• Only use the BLi battery. Refer to Technical data on page 13. The battery is software encrypted.

• Use the BLi battery that is rechargeable as a power supply for the related Husqvarna products only. To prevent injury, do not use the battery as a power
  supply for other devices.

• Risk of electrical shock. Do not connect the battery terminals to keys, coins, screws, or other metal. This can cause a short circuit of the battery.

• Do not use non-rechargeable batteries.

• Do not put objects into the air slots of the battery.

• Keep the battery away from sunlight, heat, or open flame. The battery can cause burns and/or chemical burns.

• Keep the battery away from rain and wet conditions.

• Keep the battery away from microwaves and high pressure.

• Do not try to disassemble or break the battery.

• If the battery leaks, do not let the liquid touch your body or eyes. If you have touched the liquid, clean the area with a large quantity of water and soap, and get medical aid. If you get liquid in your eyes, do not rub but flush with water for a minimum of 15 minutes and get medical aid.

• Use the battery in temperatures between -10 °C (14 °F) and 40 °C (114 °F).

• Do not clean the battery or the battery charger with water. Refer to To clean the product, the battery, and the battery charger on page 12.

• Do not use a defective or damaged battery.

• Keep batteries in storage away from metal objects such as nails, screws, or jewelry.

• Keep the battery away from children.

Battery charger safety

WARNING: Read the warning instructions that follow before you use the product.

• Risk of electrical shock or short circuit if the safety instructions are not obeyed.

• Use an approved grounded mains socket that is not damaged.

• Do not use other battery chargers than the one supplied for your product. Only use chargers when you charge BLi replacement batteries.

• Do not try to disassemble the battery charger.

• Do not use a defective or damaged battery charger.

• Do not lift the battery charger by the power cord. To disconnect the battery charger from a mains socket, pull out the plug. Do not pull the power cord.

• Keep all cables and extension leads away from water, oil and sharp edges. Make sure that the cable is not caught between objects, for example, doors,
  fences or equivalent.

• Do not use the battery charger near flammable materials or materials that can cause corrosion. Make sure that the battery charger is not covered. Pull out the plug to the battery charger if there is smoke or fire.

• Only charge the battery indoors in a location with good airflow and away from sunlight. Do not charge the battery outdoors. Do not charge the battery in
  wet conditions.

• Only use the battery charger where the temperature is between 5 °C (41 °F) and 40 °C (104 °F). Use the charger in an environment that has good airflow, is dry, and is free from dust.

• Do not put objects into the cooling slots of the battery charger.

• Do not connect the battery charger terminals to metal objects as this can short circuit the battery charger.

• Use approved main sockets that are not damaged. Make sure that the cord of the battery charger is not damaged. If extension cables are used, make sure that the extension cables are not damaged.

Safety instructions for maintenance

WARNING: Read the warning instructions that follow before you do maintenance on the product.

• Remove the battery before you do maintenance, other checks or assemble the product.

• The operator must only do the maintenance and servicing shown in this operator’s manual. Turn to your servicing dealer for maintenance and servicing
  of a larger extension.

• Do not clean the battery or the battery charger with water. Strong detergent can cause damage to the plastic.

• If you do not do maintenance, it decreases the life cycle of the product and increases the risk of accidents.

• Special training is necessary for all servicing and repair work, especially for the safety devices on the product. If not all checks in this operator’s manual are approved after you have done maintenance, turn to your servicing dealer. We guarantee that there are professional repairs and servicing available for your
  product.

• Only use original spare parts.

Assembly

Introduction

WARNING: Read and understand the safety chapter before you assemble the product.

To assemble the tube on the product

1. Put the blower nozzle over the tubular end of the product.
   

2. Push the blower nozzle in fully and turn the blower nozzle to lock it to the product.
   

To connect the battery to the product

WARNING: Only use Husqvarna original batteries in the product.

1. Make sure that the battery is fully charged.

2. Slide the battery into the battery holder of the product. The battery must slide easily, if not, it is not installed correctly.

3. Press the lower part of the battery and push it in as far as it will go into the battery compartment. The battery will lock into position when you hear a click.

4. . Make sure that the latches snap in place correctly.

Operation

WARNING: Read and understand the safety chapter before you use the product.

To connect the battery charger

1. Connect the battery charger to the voltage and frequency that is specified on the rating plate.
2. Put the plugin in a grounded socket outlet.

Note: The battery does not charge if the battery temperature is more than 50 °C/122 °F.

1. Connect the battery to the battery charger
   

2. Make sure that the green charging light on the battery charger comes on. That means that the battery is connected correctly to the battery charger.

3. When all LEDs on the battery come on, the battery is fully charged.

4. To disconnect the battery charger from the main socket, pull the plug. Do not pull the cable.

5. Disconnect the battery from the battery charger.

Note: Refer to the battery and battery charger manuals for more information.

To do a function check before you use the product

1. Do a check of the air inlet for dirt and cracks. Use a brush and clean off grass and leaves from the product.
2. Make sure that the product works correctly.
3. Do a check of all nuts and screws and make sure that they are tight.

To start the product

1. Move the ON/OFF switch lever to the ON position.

2. Use the power trigger to control the speed.

To set the optimal airflow for your work

1. Move power trigger control to increase or decrease the airflow.
   

2. Use position 1 to blow very gently. This mode can be used for indoor use.

To temporarily increase the airflow
This mode is used only on occasions when leaves and trash is blocked or when the usual airflow is not sufficient. In most conditions, usual airflow is sufficient.
An increasing airflow is used mainly for brief measures. Temporary increasing of the airflow can be used in all power trigger settings.

1. Press the power trigger to get a temporary increased airflow.
2. The airflow increases for approximately 10 seconds and then goes back to usual airflow.

Automatic shutdown function
The product is equipped with a shutdown function that deactivates the product after 30 minutes if it is not used.

To stop the product

Note: Always remove the battery to prevent the product being started by accident.

1. Release the power trigger.
2. Move the ON/OFF switch lever to the OFF position.
3. Remove the battery from the product. Press the two release buttons and pull out the battery.

Maintenance

Introduction

WARNING: Before you do any maintenance work you must read and understand the safety chapter.

Maintenance schedule

WARNING: Remove the battery before you do maintenance.

The following is a list of the maintenance steps that you must do on the product.

Check that the release buttons on the battery works and lock the battery into the machine.| X| |
Check that the battery charger is intact and functional.| X| |
Check that all couplings, connections, and cables are intact and free from dirt.| | X|
Check the connections between the battery and the machine and also check the connection between the battery and the battery charger.| | | X

To do a check of the air intake

1. Make sure that the air intake is not blocked on any side of the product.

2. Stop the product and remove leaves or unwanted material if necessary.

CAUTION: A blocked air intake decreases the blowing capacity of the product and increases the motor’s

working temperature. This can result in motor failure due to overheating.

To examine the battery and the battery charger

1. Examine the battery for damages, for example, cracks.
2. Examine the battery charger for damages, for example, cracks.
3. Make sure that the battery charger connection wire is intact and that there are no cracks in it.

To clean the product, the battery and the battery charger

1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the battery charger are clean before the battery is put in the battery charger or the product.

Troubleshooting

Troubleshooting of the product

to ON po­sition to start the product again.
The product has not been in operation for more than 30 minutes.

Troubleshooting of the battery and/or charger
Troubleshooting the battery and/or the battery charger during charging.

Troubleshooting does not include the backpack battery, refer to the separate manual.

Battery

are between -10°C (14°F) and 40°C (104°F).
Error LED is lit| Permanent battery error| Speak to your servicing dealer.

Battery charger

charger in tempera­ tures between 5 °C (41 °F) and 40 °C (104 °F).
Red error LED comes on.| | Speak to your servicing dealer.

Transportation, storage and disposal

Transportation and storage

• The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements.

• Obey the special requirement on packages and labels for commercial transportations, including by third parties and forwarding agents.

• Speak to a person with special training in dangerous material before you send the product. Obey all applicable national regulations.

• Use tape on open contacts when you put the battery in a package. Put the battery in the package tightly to prevent movement.

• Remove the battery for storage or transportation.

• Put the battery and the battery charger in a space that is dry and free from moisture and frost.

• Do not keep the battery in an area where static electricity can occur. Do not keep the battery in a metal box.

• Put the battery in storage where the temperature is between 5 °C (41 °F) and 25 °C (77 °F) and away from open sunlight.

• Put the battery charger in storage where the temperature is between 5 °C (41 °F) and 45 °C (113°F) and away from open sunlight.

• Charge the battery 30% to 50% before you put it in storage for long periods.

• Put the battery charger in storage in a space that is closed and dry.

• Keep the battery away from the battery charger during storage. Do not let children and other not approved persons touch the equipment. Keep the
  equipment in a space that you can lock.

• Clean the product and do a full servicing before you put the product in storage for a long time.

• Use the transportation guard on the product to prevent injuries or damage on the product during transportation and storage.

• Attach product safety during transportation.

Disposal of the battery, battery charger, and product

The symbol below means that the product is not domestic waste. Recycle it at a recycling station for electrical and electronic equipment. This helps to prevent damage to the environment and to persons. Speak to local authorities, domestic waste service, or your dealer for more information.

Note: The symbol shows on the product or package of the product.

Technical data

| 320iB
---|---
Motor
Motor type| I BLDC (brushless) 36V
Weight

| 320113
---|---
Weight without battery, Lbs/kg| 5.3/2.4
Sound levels’
Bystanders sound pressure level measured at 50 ft (15m), ANSI 8175.2, dB(A)| 60
Equivalent sound pressure level at the operator’s ear, measured according to EN ISO 22868 dB(A), min./max.| 80
Fan performance
Airflow with a standard nozzle, cfm / m3/min| 410/11.6
Blowing force with a standard nozzle, N| 12.2
Max. air velocity with a standard nozzle, mph / m/s| 120.8/54

Accessories

Approved batteries for the product

Approved battery chargers

1 Reported data for equivalent sound pressure level for the product has a typical statistical dispersion (standard deviation) of 3 dB (A).

800 – 001 – 31.08.2018

www.husqvarna.com

Original instructions
Instrucciones originales
Instructions d’origine

References

• Husqvarna Forest & Garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>