Marshall True 4k30 Compact Camera CV380-CS User Manual

Broadcast A/V Division

CV380-CS
True 4k30 Compact Camera
User Manual

Menu Structure

WB
CONTROL| ATW|
AWB|
ONE PUSH|
INDOOR|
OUTDOOR|
MANUAL| BLUE
RED
AE CONTROL| AUTO| AGC MAX
SENS LW
AE BRIGHT
FIX CONTROL
SHUT FIX| SHUTTER
AGC MAX
SENS LW
AE BRIGHT
FIX CONTROL
IRIS FIX| IRIS
AGC MAX
SENS LW
AE BRIGHT
FIX 03NTROI.
AGC FIX| AGC
SENS LW
AE BRIGHT
0.K CONTROL
MANUAL| SHUTTER
IRIS
AGE
SENS LW

COLOR BURST
AUDIO| MIC/LINE|
AUDIO LEVEL|
MIC ATTENUATOR|
SAMPLE BITS|
IMAGE
CONTROL| LENS SHADING|
CONTRAST|
BRIGHTNESS|
SATURATION|
HUE|
EDGE ENHANCE|
AUTO SATURATE|
AUTO EDGE|
BLACK LEVEL|
GAMMA CORRECT|
DNR| DNR MODE
DNR LEVEL
SPECIAL| DZOOM|
DEFOG|
DIS|
BACKLIGHT|
BINNING|
DEFECT PIXEL|
DISP FUNCTION|
FLICKER DETECT|

OSD Joystick and Button

Press SET button to access the MAIN MENU.

WB CONTROL

Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT buttons.

• AUTO: Controls the automatic adjustment of the light source’s color temperature from 3,000°K – 8,000°K.
• ATW: Continuously adjusts camera color balance in accordance with any change in color Compensates for color temperature changes within the range of 1,900°K to 11,000°K.
• PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place the white paper in front of the camera when the OSD button is pressed to obtain the optimum results.
• MANUAL: Select this to fine-tune White Balance manually.
• You can adjust the blue and red tone level manually

1. BLUE: Adjust the Blue tone of the image. (0-20)
2. RED: Adjust the Red tone of the image. (0-20)

• INDOOR: Select this to adjust white balance to indoor lighting condition.
• OUTDOOR: Select this to adjust white balance to outdoor lighting condition.

1. Adjust White Balance first by using the AUTO or ATW mode before switching to MANUAL mode.
2. White Balance may not work properly under the following conditions. In this case, select the ATW mode.
   • When the ambient illumination of the subject is dim.
   • If the camera is directed towards a fluorescent light or installed in a place where illumination changes dramatically, the White Balance operation may become unstable.

AE CONTROL

Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or DOWN buttons.

• AUTO: Adjusts the exposure level automatically. Detailed fine-tuning options are available under this menu.
• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the selected shutter speed.
• IRIS FIX: Provides more detailed iris control options. All other controls are tuned for the selected iris setting.
• AGC FIX: Provides a more detailed gain option. All other controls are tuned for the selected gain

1. SHUTTER: Speed can be set at auto or (1/30-1/10,000)
2. AGC MAX: Used to set maximum gain value to control the video noise caused by Auto Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)
3. SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust the picture quality. (Off, x2-x10)
4. AE BRIGHT: Select this to adjust auto exposure brightness levels. (0-10)
5. IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens (0-5)
6. LENS MODE: Lens setting will be optimized for selected enviornment, for DC Iris lens
7. FLK CONTROL: Provides a proper image sensor frequency to match the power frequency in order to minimize video flicker.

DAY / NIGHT

Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN buttons.

MODE: Set camera to either color mode or B&W mode. (Day, Night)
DAY: When set to DAY mode, the camera stays in color and IR cut filter is engaged.
NIGHT: When set to NIGHT mode, the camera stays in B&W and IR cut filter is removed.

• NIGHT COLOR : When on, the camera stays in color mode. Night (B&W) can be selected from
  this mode. (On, Off)

• COLOR BURST : Signal ON or OFF can be set for the CVBS signal. (On, Off)

AUDIO

Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one sub-mode using the UP or DOWN buttons.

• MIC / LINE: When using audio microphone use MIC mode, when using other audio sources use the LINE setting
• AUDIO LEVEL: Select this to adjust audio levels manually.
• MIC ATTENUATOR: Audio attenuation can be controlled from this menu to minimize the audio noise level

1. SAMPLE BITS: Select the bit depth of audio

IMAGE CONTROL

Select IMAGE CONTROL using the UP or DOWN button. You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN buttons.

• LENS SHADING: Corrects inconsistent brightness level in the image.
• CONTRAST: Adjust the image contrast level.
• BRIGHTNESS: Adjust the image brightness level.
• SATURATION: Adjust the image saturation level.
• HUE: Adjust the image hue level.
• EDGE ENHANCE: Adjust the image sharpness level.
• AUTO SATURATE: Decrease saturation automatically when noise scene is detected.
• BLACK LEVEL: Adjust the image black level.
• GAMMA CORRECT: Adjust the image output gamma level.
• DNR: Reduces video noise at low ambient light. Select the DNF? level from OFF LOW MIDDLE, and HIGH using the LEFT or RIGHT

SPECIAL

Select SPECIAL using the UP or DOWN button. You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using the UP or DOWN buttons.

• DZOOM: Digitally zoom the video by the desired ratio.
• DEFOG: This feature will help increase visibility in extreme weather conditions, such as fog, rain, or strong luminous intensity.
• DWDR: This feature enables users to view both the object and background more clearly when the background is too bright.
• MOTION DETECT: Select a zone to be sensitive to motion, when motion is detected the camera will adjust to better capture subject in motion.
• BLACKLIGHT: Adjust backlight compensation by choosing either BLC or HLM from this
• BINNING: Enable or disable pixel
• DEFECT PIXEL: Advanced defective pixel correction menu.
• DISP FUNCTION: Display effects such as freeze mirror, rotation, and style can be applied from this menu.
• FLICKER DETECT: Adjust the image sensor frequency to match the power frequency.
• PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones.

SETUP

CAMERA setup can be adjusted from this menu. You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN buttons.

• CAM TITLE: Camera title can be turned ON or OFF.
• COMMUNICATION: VISCA communication can be

1. CAM ID: Camera ID can be (0-7)
2. ID DISPLAY: Camera ID display can be
3. BAUDRATE: Camera baudrate can be set.

(2400, 4800, 9600, 19200, 38400)

• SYSTEM INFO: Camera information can be found under this menu.
• OUTPUT FORMAT: Camera resolution and frame rate can be (1080 by default)

Select the FRAME RATE using the LEFT or RIGHT buttons. Available Frame Rates are:

4096 x 2160p
3840 x 2160p
1920 x 1080p| 30,
30,
60,| 29.94,
29.94,
59.94,| 25,
25,
50,| 24,
24,
30,| 23.98
23.98
29.9Z| 25,| 24,| 23.98
---|---|---|---|---|---|---|---|---

1920 x 1080i 60, 59.94, 50

1280 x 720p 60, 59.94, 50

RESET

Select RESET using the UP or DOWN buttons.

• RESET: Reset the camera settings the factory defaults or user setting value.

• ON: Set the camera set to either “FACTORY” or “USER” of the “CHANGE” menu. Make sure to select the right mode from “CHANGE” before defaulting the camera.
• RESET MODE: Select the desired setting mode.

Select from USER or FACTORY using the LEFT or RIGHT button.

1. USER: Select “USER” if setting value user saved last is needed.
2. FACTORY: Select “FACTORY” if the factory default setting is needed.

“FRAME RATE”, “CAM ID”, and “BAUDRATE” will note a change.

To RESET Camera to default settings (1920x1080p30fps) power-cycle the camera then use the following combo on OSD Joystick: UP, DOWN, UP, DOWN, then push and HOLD
joystick in for 5 seconds then release.

EXIT

Select EXIT using the UP or DOWN button.

• SAVE: Exit the setup after saving the value changes.

TROUBLESHOOTING

Before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult with your supplier.

Nothing appears
on the screen.| a. Check that all connected devices are powered on.

b. Confirm that the voltage is correct.

c.  Confirm that the power supply provides enough current to power the camera.

d. Check that all video cables are correctly connected.

The picture is
not clear.| a. Check that your monitor is correctly adjusted.

b. Confirm that the glass in front of the lens is clean. If there is dust, dirt, or fingerprints on the glass, the image quality will be affected.

To clean the glass, use a soft, dry, and non-abrasive cloth or a commercially available lens cleaning set

c.  Correctly adjust the focus.

The picture has
interference.| a.   The camera may be close to a high voltage source, such as a power generator.

b.   The BNC cable is not terminated properly.

c.    The video cables are not connected properly.

The picture is
flickering
continually.| a.   Check the termination and set the impedance at 750 properly.

b.   Ensure that the camera is not pointing towards the Sun or any light source.

c.    Check if there is an intermediate device.

d.   Check if the distance of the video cable exceeds the maximum transferable limitation.

The camera is not synchronizing with the reference signal.| a. Make sure Tri- Level reference signal is used.

b. Locking takes up to 1 minute depending on the signal strength.

Make sure the sync LED is solidly lit.

c.  Check if the cable and connectors used in reference sync are in good condition.

d. Make sure the cable length used in reference sync does not exceed 100 ft.

e. Make sure OUTPUT EN is on when using the genlock output.

Warranty

Marshall Electronics warranties to the first consumer that this device will, under normal use free from defects in workmanship and materials when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations, or modifications in design or construction void this warranty. No sales personnel of the seller any other person is authorized to make any warranties other than those described above or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without notice.

20608 Madrona Avenue, Torrance, CA 90503
Tel: 800-800-6608 / 310-333-0606 • Fax: 310-333-0688
www.marshall-usa.com
support@marshall-usa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>