Godox LC500 LED Light Stick Instruction Manual
- June 6, 2024
- Godox
Table of Contents
Godox LC500 LED Light Stick Instruction Manual
Foreword
Thank you for purchasing this Godox Product!
This LED Light Stick LC500 is a continuous light with double color
temperature, high light brightness and wireless adjustment. Suitable for
almost all shooting occasions, which can offer lighting for live, camping,
make up, portrait shooting, video, wedding, children photography, etc. It’s
portable and easy to be operated. Features:
- High light brightness which can be freely adjusted in wide range
- Double color temperature: 3300K and 5600K can be switched
- Wireless adjustment
- Built-in lithium battery
- High-temperature resistance
- Handle use or being fixed on the tripod
- Suitable for almost all situation
- Intellectual memory
Warning
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals
and other similar materials. In certain circumstance, these materials may be
sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
As this product has built-in lithium battery, do not disassemble, impact,
squeeze or put it into fire. If serious bulge occurs, please do not use. Do
not use or store the
product if the ambient temperature reads over 50°C. Please charge the product
with
specialized charger and correctly operate it within the defined voltage and
working
temperate according to the instruction manual.
****The light source contained in this luminaire shall only be replaced by
the manufacturer or his service agent or a similar qualified person.
Parts
Body
**LCD Panel
**
Included Items
Body 1
Reflector 1
Charger(16.8V/1.2A) *1
Portable Bag *1
Battery Management
Power Supply
With built-in Li-polymer battery which can offer about 2 hours’lighting once
got fully charged.
Charge
The whole charging time takes about 2.5 hours. The charge indicator turns to
red in charging while green once got fully charged.
Attaching Reflector
Installation : Choose the side which needs reflector and adjust the reflector’s direction. Match the ridge in the reflector’s handle ring with the groove on the handle(as shown) and slip the reflector over the LED light stick and push in. Extend the reflector for shooting.
Detachment: Hold the handle and push the reflector from the bottom up to
detach.
Operation
-
Switch: long press the power switch to power on the LED light and long press the button again to power off.
-
Mode selection: press the MODE button to switch the 5600K cold color
temperature and 3300K warm color temperature.
-
Channel/group selection: press the CH/GRP button to choose the CH channel value or GRP group value, then, pressing the “-“ or “+”button to change the channel or group value.
-
Light brightness adjustment: short press the “-” or “+” button to decrease or increase the value in 1% while long pressing the “-” or “+”button to decrease or increase the value in 10%. The light brightness can be adjusted from 10% to 100%.
-
Operation: This LED light stick can be used by handle or on the light stand,
which can be freely applied according to the user requirement.
Wireless Remote Control
With 433MHz wireless system, this product has remote grouping and control function. Up to 6 groups of LED lights can be controlled. 16 channels are available with strong anti-interference capability.
Please set the channels and groups of LED light stick to the same as those of
remote
control before usage.
Adjusting Channel/Group of the LED Light Stick
- Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to choose a group ID (A to F).
- Press the CH/GRP button twice and the channel icon blinks. Press the “-” or
“+” button to choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
- Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to choose a group ID (A to F).
- Press the CH/GRP button twice and the channel icon blinks. Press the “-” or “+” button to choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
- Press the “-” or “+” button to adjust the light brightness.
- Press the SET button of the remote control once and the color temperature icon blinks. Press the “-” or “+” button to adjust the color temperature.
Note: Remote control purchased separately
Note: The wireless signal can be received only when the LED Light Stick is power on.
Other Operation Tips
- Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
- Pressing the “SET” button on the remote control for 2 seconds can only turn on/off the current LED group.
- The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(1) When using the cold temperature light, please set the color
temperature of the remote control as 5600K constantly.
(2) When using the warm temperature light, please set the color
temperature of the remote control as 3300K constantly.
(3) Please remove the battery if the light will not be used for an
extended period of time.
Technical Data
| Model | LC500 |
|---|---|
| Built-in Lithium Battery | 14.8V/2600mAh lithium battery |
| Power | Max. 18W |
| Double Color Temperature | 5600K±300K |
3300K±300K
Channel| 16
Group| 6 (A, B, C, D, E, F)
100% Light Brightness(LUX)| 1200 (1 m)
TLCI Index| ≥95
CRI Index| >95
Light Brightness Range| 10%~100%
LED Beads Quantity| 516
Operation Temperature| -5~50°C
Dimension| 5655656mm (reflector is not included)
Net Weight (without reflector)| 760g
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!
| Product Information | Model | Product Code Number |
|---|---|---|
| Customer Information | Name | Contact Number |
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:
Note: This form shall be sealed by the seller
Applicable Products
The document applies to the products listed on the Product Maintenance
lnformation (see below for further information). Other products or accessories
(e.g. promotional items,giveaways and additional accessories attached,etc.)
are notincluded in this warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the
relevant Product Maintenance lnformation. The warranty period is calculated
from the day(purchase date) when the product is bought for the first time,And
the purchase date is considered as the date registered onthe warranty card
when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the
following cases: (1)The product or accessory has expired its warranty period;
(2)Breakage or damage caused by inappropriate usage, maintenance or
preservation, such as improper packing, improper usage, improper plugging
in/out external equipment, falling off or squeezing by external force,
contacting or exposing to the improper temperature, solvent, acid, base,
flooding and damp environments, etc; (3)Breakage or damage caused by non-
authorized institution or staff in the process of installation, maintenance,
alternation, addition and detachment; (4)The original identifying information
of product or accessory is modified, alternated, or
removed; (5)No valid warranty card; (6)Breakage or damage caused by using
illegally authorized, nonstandard or non-public released software; (7)Breakage
or damage caused by force majeure or accident; (8)Breakage or damage that
could not be
attributed to the product itself. Once met these situations above, you should
seek solutions from the related responsible parties and Godox assumes no
responsibility. The damage caused by parts, accessories and software that
beyond the warranty period or scope is not included in our maintenance scope.
The normal discoloration, abrasion and consumption are not the breakage within
the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
Product Type| Name| Maintenance Period(month)| Warranty
Service Type
---|---|---|---
Parts| Circuit Board| 12| Customer sends the
product to designated site
Battery| 3| Customer sends the
product to designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.| 12|
Customer sends the product to designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice,
package, etc.| No| Without warranty
Godox After-sale Service Call 0755-29609320-8062
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>