Godox SLB60 SL Series Video Light Instruction Manual

: June 6, 2024
: Godox

Godox SLB60 SL Series Video Light Instruction Manual

Thank you for purchasing this Godox Product!
SL Series video lights are excellent for product shooting, photojournalistic and video recording, etc. It creates stable light resource and even illumination for photography.
Two models are available: White Version (5600K), Yellow Version (3300K).

Features

60W LED bulbs guarantee high light brightness
Using lithium battery pack (can be in common use with AD600 series lithium battery). And compatible with AD-AC power source that can be used indoor.
The color rendering index is over 93, presenting the objects authentically
Wirelessly adjust light brightness, wireless 433MHz grouping system (6 groups & 16 channels)
Large-sized LCD panel. Settings auto saved
With temperature control function to prevent overheating
With specialized protect cover to protect the LED beads
With red copper heatsink and built –in fan to offer excellent heat dissipation

Type|

Model

---|---

White Version(Color Temperature 5600K)

|

SLB60W

Yellow Version(Color Temperature 3300K)|

SLB60Y

For your safety

Do not place in high temperature or high humidity conditions.
If this product overheats, it will cease operation and resume working after cooling down. This is due to the built-in overtemperature protection.
Do not handle with wet hands, immerse in water, or expose to rain.
Do not dissemble or modify this product. Should the product break open as the result of a fall or other accident, send the defective back to authorized service center for inspection and maintenance.

Parts

Product Overview

Body

01. LED Beads
02. Protect Cover
03. Heatsink
04. Accessory Slot
05. ON/OFF Power Switch
06. Select Dial + SET Button
07. CH/GRP Button
08. LCD Panel (White in Blue)
09. Mounting Bracket
10. Umbrella Input
12. Lithium Battery

LCD Panel

Accessories

Lamp Cover
Power Cord
Battery charger
Standard Reflector
Lithium battery pack
AD-AC Power Source (Optional Accessory)

Operation

Using the Video Light

Connect the light with lithium battery pack.
Long press the ON/OFF button for 1 second to turn on; press again the ON/OFF button to turn off.
LCD panel shows the information.

Light Brightness Adjustment

Turn the select dial to adjust the light brightness.
The light brightness adjustable range is at 10%~100%.

Temperature Indication

This video light checks its temperature at any time to avoid dangerous situations. It will auto power off when the temperature is too high.
Press the SET button for 2 seconds and the temperature can be switched between Celsius and Fahrenheit.
Quickly double-click the SET button, the temperature icon will blink, you can turn the select dial to set the temperature (40°~60°) with fan.

Wireless Remote Control

With 433 MHz wireless system, this product has remote grouping and control function. Up to 6 groups of video lights can be controlled. 16 channels are available with strong anti-interference capability.

Please set the channels and groups of video light to the same as those of remote control before usage.
When using the White Version, please set the color temperature of the remote control as 5600K constantly;
When using the Yellow Version, please set the color temperature of the remote control as 3300K constantly;
Adjusting Channel/Group of the Video Light
- Press the CH/GRP button and the group icon blinks. Turn the select dial to choose a group ID (A to F).
- Press the CH/GRP button twice and the channel icon blinks. Turn the select dial to choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
- Press the CH/GRP button and the group icon blinks. Press the”-““+” button to choose a group ID (A to F).
- Press the CH/GRP button twice and the channel icon blinks. Press the”-““+” button to choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
- Press the”-““+” button to adjust the light brightness.
- Press the SET button of the remote control once and the color temperature icon blinks.
  Press the”-““+” button to adjust the color temperature.

Other Operation Tips

Pressing the ON/OFF button on the remote control can turn on/off all the video light groups.
Pressing the “SET” button on the remote control for 2 seconds can turn on/off the current video light group.
Please remove the battery if the light will not be used for an extended period of time.

Warning Icon When there are some abnormal situations in the inner video light, the relevant LCD signs will blink as warnings. For example:

When the fan stops working due to fault, signs will blink to alarm.
When heatsink’ temperature is over 70 Celsius degrees, the temperature on the LCD panel will blink and the video light will stop working.
When the battery level is low, the battery icon will blink and the video light will stop working.
Note: Remote control is available separately

Battery

Features

This Video light uses Li-ion polymer battery (can be in common use with AD600 series lithium battery) which has long runtime. The available charge-and-discharge times are 500.
It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit.
Take only 4 hours to fully charge the battery by using the standard battery charger.

Cautions

Do not short circuit.
Do not expose to rain or immerse into water. This battery is not water proof.
Keep out of reach of children.
No over 24 hours’ continuous charging.
Store in dry, cool, ventilated places.
Do not put aside or into fire.
Dead batteries should be disposed according to local regulations.
If the battery had ceased using for over 3 months, please make a full recharge.

Loading and Unloading the Battery Pack

Loading:

Match the battery’s groove with the main battery compartment’s ridge.
Push down the battery pack until it is locked.

Unloading:

Push the Battery Locking Ring to the right.
Push the battery pack upward to unload it.

Battery Level Indication

Make sure the battery pack is securely loaded in the video light. Check the battery level indication on the panel to see the remaining battery level.

Battery Level Indication

|

LED Indication on the Battery

|

Meaning

---|---|---

3 grids

|

1 red grid + 3 green grids

|

Full battery

2 grids

|

1 red grid + 2 green grids

| Medium battery

1 grid

|

1 red grid + 1 green grid

|

Low battery

Blinking

|

1 red grid + red blink

| The battery level is going to be used out immediately. And the flash will auto power off in 1 minute. Note: Please recharge the battery as soon as possible (within 10 days ).
Then, the battery can be used or be placed for long period.

Note: please allow some error on the display when the gears is changing.

Technical Data

Video Light

|

White Version SLB60W

|

Yellow Version SLB60Y

---|---|---
Lithium Battery| 11.1V/8700mAh
Battery Duration (full power)| >60 minutes
Channel| 16
Group| 6 groups (A, B, C, D, E, F)
Power| Max. 60W
Color Temperature|

5600K±200K

|

3300K±200K

Product design and specifications are subject to change without notice.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!

Product Information

| Model| Product Code Number
---|---|---
Customer Information| Name| Contact Number
Address

Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller.

Applicable Products

The document applies to the products listed on the Product Maintenance information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories is implemented according to the relevant Product Maintenance information.
The warranty period is calculated from the day(purchase date) when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:

The product or accessory has expired its warranty period;
Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
The original identifying information of product or accessory is modified, alternated, or removed;
No valid warranty card;
Breakage or damage caused by using illegally authorized, nonstandard or non public released software;
Breakage or damage caused by force majeure or accident;
Breakage or damage that could not be attributed to the product itself.

Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type

|

Name

|

Maintenance Period(month)

|

Warranty Service Type

---|---|---|---

Parts

|

Circuit Board

|

12

| Customer sends the product to designated site

Battery

|

3

| Customer sends the product to designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.|

12

| Customer sends the product to designated site

Other Items

| Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc.|

No

| Without warranty

Godox After-sale Service Call 0755-29609320-8062

Support

GODOX Photo Equipment Co., Ltd

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com

godox.com

Made in China

Icons