Godox LED1000II LED Video Light Instruction Manual
- June 6, 2024
- Godox
Table of Contents
LED
LED VIDEO LIGHT
LED1000D
II LED1000Bi II
Instruction
Manual
Foreword
Thank you for purchasing this Godox product!
This LED1000 II video light is excellent for product shooting,
photojournalistic and video recording, etc. It provides a wide spectrum,
beautifully soft and even illumination for photography. Two models are
available: LED1000D II Daylight Version (5600K), and LED1000Bi II Bicolor
Version (3300K~5600K).
Features:
- 1024-LED-bulbs panel is lithium-ion or DC powered
- Wirelessly adjust brightness or color temperature
- Large-sized LCD panel. Settings auto-saved.
Type | Model |
---|---|
Daylight Version(Color Temperature 5600K) | LED1000D II |
Bicolor Version(Color Temperature 3300K-5600K) | LED1000Bi II |
Warning
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent
to an authorized maintenance center.
Keep out of reach of children.
As this product does not have a waterproof function, please take measures to
waterproof in a rainy or damp environment.
Do not use or store the product if the ambient temperature reads over 50 °C.
Do not use the flash unit in the presence of flammable gases, chemicals, and
other similar materials. In certain circumstances, these materials may be
sensitive to the strong light emitting from this flash unit, and fire or
electromagnetic interference may result.
Observe precautions when handling batteries:
- Do not put batteries into a fire or apply direct heat to them.
- Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove batteries when the product is not used for a long time or when batteries run out of charge.
- Should liquid from the batteries come into contact with skin or clothing, rinse immediately with fresh water.
Parts
|
---|---
01. 1024 LED Beads| 12. Knob A
---|---
02. Color Filters| 13. Knob B
03. Reflector| 14. Knob C
04. ON/OFF Power Switch| 15. Bracket
05. RUN/STOP Button| 16. Bracket Mounting Hole
06. Select Dial + SET Button| 17. Power Adapter
07. CH/GR Button| 18. Power Cord
08. DC Power Jack| 19. DMX In
09. Lithium Battery Compartment| 20. DMX Out
10. Power Indicator| 21. DMX512 Input Port
11. LCD Panel (White in Black)| 22. DMX512 Output Port
Power Management
- Power Supply
Two power supply modes are available:
|
---|---
● Using lithium battery: This light uses a SONY BP-L model lithium battery
(purchased separately).| ● Using DC power jack: This light can be powered by a
DC power supply. Use a 13~16.8V adapter (included) to connect the light with
the DC power jack (08).
Note:
● When using a lithium battery, the Battery Level Indicator is displayed on
the LCD panel. When the indicator blinks, the lithium battery power is low.
Please recharge it immediately before usage in order to avoid forceful auto-
off.
- Installing Lithium Battery
● Turn the Power Switch (04) off.
● Target the socket of the lithium battery towards the “+” “-” contacts of the Battery Compartment (09). Push the battery in until it locks.
● Power the light on.
● After using the light, please power it off.
Using the Video Light
- Screw the Knob C (14) to the highest point and install the light stand onto the Bracket Mounting Hole (16).
- Tighten the Knob C (14).
Operation
-
Power Supply
● Insert lithium battery or connect the light with DC power supply. Switch the power on, the Power Indicator is on and the video light gives out light.
-
LED General Mode:
● in the initial state, power the LED light on to enter LED general mode (long-press the RUN/STOP button to switch LED general mode and DMX mode).
-
Light Brightness/Color Temperature Adjustment:
● Light Brightness Adjustment: turn the selector dial on the body to adjust light brightness from 0% to 100%.
● Color Temperature Adjustment: short press the SET button and the color temperature value will be blinking. Then, turn the select dial to adjust the color
temperature from 3300K to 5600K. Model| Color Temperature| Light Brightness Range
---|---|---
LED1000D II| 5600K| 0%-100%
LED1000Bi II| 3300K/5600K| 0%-100%
3400K-5500K| 25%-100% -
Wireless Remote Control
This product has a remote grouping and control function.
Up to 6 groups of LED light can be controlled. 16 channels are available with strong anti-interference capability.
Please set the channels and groups of LED video lights to the same as those of remote control before usage. Adjusting Channel/Group of the LED Video Light- Press the CH/GR button and the group icon blinks. Turn the select dial to choose a group ID (A to F).
- Press the CH/GR button twice and the channel icon blinks. Turn the select dial to choose a channel ID (1 to 16).
Note: The wireless signal can be received only when the LED light is
powered on.
Other Operation Tips:
● Pressing the ON/OFF button on the remote control can turn on/off all the LED
groups.
● Pressing the “SET” button on the remote control for 2 seconds can turn
on/off the current LED group.
● The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
(1)When using the Daylight Version LED1000D II, please set the color the
temperature of the remote control as 5600K constantly;
(2)Please remove the battery if the light will not be used for an extended
period of time.
- Replacing A Color Filter
● Pinch the edge of the color filter (02) and pull it out upwardly.
● Insert a new color filter in and push it downward. Then the color filter is securely in position.
DMX Mode
-
Choose DMX Mode
● In the initial state, hold down the RUN/STOP button and power the light on to enter DMX mode, and the brightness value and color temperature value will be displayed on the LCD panel.
● In LED general mode, long-press the RUN/STOP button to enter DMX mode. In this way, the brightness value and color temperature value won’t be displayed on the LCD panel. -
Set DMX Channel
● Press the SET button and the DMX channel will be blinking. Turn the select dial to set DMX from 1 to 512. -
Connect to Console
● Choose DMX port according to the model to be controlled. Each light will occupy two DMX channels and the light brightness or color temperature can be adjusted.
Note: In DMX mode, the color temperature and light brightness can only be controlled by the console.
What’s in the Box of LED1000II?
NO. | Included Item | LED1000D II | LED 1000Bi II |
---|---|---|---|
1 | LED Video Light | 1 PC | 1 PC |
2 | Power Adapter | 1 PC | 1 PC |
3 | Power Cord | 1 PC | 1 PC |
4 | Diffusion Filter | 1 PC | 1 PC |
5 | Yellow Filter | 1 PC | NO |
6 | Blue Filter | 1 PC | NO |
Technical Data
LED100011 Video Light| Daylight Version LED1000D II|
Bicolor Version LED1000Bi II
---|---|---
Lithium Battery| 14.8V Lithium Battery(SONY BP-L model lithium battery) (sold
separately)
DC Power Supply| 13-16.8V
Channel| 16
Group| 6 groups(A,B,C,D,E,F)
Power| Max. 70W
Color Temperature| 5600K±300K| 3300K-5600K ±300K
Brightness(LUX) (“x-)| 5400(1m)| 4800 (1m/4200K)
2200 (1m/3300K)
2600 (1m/5600K)
CRI (A%)| 96
TLCI (-—c;)| 98
Light Brightness Range| 0°/0-100°/0
LED Beads Quantity| 1024| 5600K: 512
3300K: 512
Operation Temperature| -10-40°C
Dimension| 430460100mm
Net Weight| 2.51kg
***** Product design and specifications are subject to change without notice.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safely keep it. Thank you!
Product
Information| Model| Product Code Number
---|---|---
Customer
Information| Name| Contact Number
Address
Seller
Information| Name
Contact Number
Address
Date of Sale
Note:
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance
information (see below for further information). Other products or
accessories (e.g. promotional items, giveaways, and additional accessories
attached, etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories is implemented according to
the relevant Product Maintenancelnformation. The warranty period is calculated
from the day(purchase date) when the product is bought for the first time, And
the purchase date is considered as the date registered onthe warranty card
when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product
distributor or authorized service institutions. You can also contact the Godox
after-sale service call and we will offer you service. When applying for
maintenance service, you should provide a valid warranty card. If you cannot
provide a valid warranty card, we may offer you a maintenance service once
confirmed that the product or accessory is involved in the maintenance scope,
but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the
following cases:
- The product or accessory has expired its warranty period;
- Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposure to the improper temperature, solvent, acid, base, flooding, and damp environments, etc;
- Breakage or damage caused by the non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment;
- The original identifying information of product or accessory is modified, alternated, or removed;
- No valid warranty card;
- Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software;
- Breakage or damage caused by force majeure or accident;
- Breakage or damage that could not be attributed to the product itself.
Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories, and software beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion, and consumption are not the breakages within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
Product Type | Name | Maintenance Period(month) | Warranty Service Type |
---|---|---|---|
Parts | Circuit Board | 12 | The customer sends the product to the designated |
site
Battery| 3| The customer sends the product to the designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.| 12| The
customer sends the product to the designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, locking device,
package, etc.| No| Without warranty
Godox After-sale Service
Call 0755-29609320-8062
QCPASS
GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone,
Tangwei Community,
Fuhai Street, Baoan District,
Shenzhen, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
godox.com
Made in China