Godox R1200 Ring Flash Head Instruction Manual
- June 6, 2024
- Godox
Table of Contents
Godox R1200 Ring Flash Head Instruction Manual
R1200
GODOX Photo Equipment Co., Ltd.
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street,
Bao’an District,
Shenzhen, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail:[email protected]
Made in China
Before using this product
Please read this user manual carefully in order to ensure your safety and the
proper operation of
this product. Keep for future reference.
Thank you for purchasing a GODOX product.
Ring Flash Head R1200 should be used in combination with AD1200Pro Power Pack,
which
offers soft and even light effects and shadowless illumination.
Warning
-
Always keep this product dry. Do not use in rain or in damp conditions.
-
Do not disassemble. Should repairs become necessary, this product must be sent to an
authorized maintenance center. -
Keep out of reach of children.
-
Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise,
electric shock may occur if you touch the electronic parts inside it. -
Do not fire the flash directly into the eyes (especially those of babies) within short distances.
-
Otherwise visual impairment may occur.
-
Do not use the flash unit in the presence of flammable gases, chemicals and other similar
materials. In certain circumstance, these materials may be sensitive to the strong light
emitting from this flash unit and fire or electromagnetic interference may result. -
Do not leave or store the flash unit if the ambient temperature reads over 50°C. Otherwise
the electronic parts may be damaged. -
Turn off the flash unit immediately in the event of malfunction.
Conventions used in this Manual
This manual is based on the assumption that both the camera and camera flash’s
power switches are powered on.
Reference page numbers are indicated by “p.**”.
The following alert symbols are used in this manual:
The Caution symbol indicates a warning to prevent shooting problem.
The Note symbol gives supplemental information.
Name of Parts
Usage
Connect to Power Pack
Insert the power cord plug of flash head into the power socket. Please insert
the tail end of the
plug into the slot firstly and insert the other end to finish installation.
When taking the plug out,
hold down the spring and pull out the plug upwards.
Install and Detach the Ring Flash Tube
Cautions
- Do not short circuit.
- Do not expose to rain or immerse into water. This battery is not water proof.
- Keep out of reach of children.
- Store in dry, cool, ventilated places.
- Do not put aside or into fire.
Technical Data
Note: Parameters will be changed by different accessories and distance.
Maintenance
- Shut down the device immediately should abnormal operation be detected.
- Avoid sudden impacts and the product should be dedusted regularly.
- It is normal for the flash tube to be warm when in use. Avoid continuous flashes if unnecessary.
- Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories.
- This product, except consumables e.g. flash tube, is supported with a one-year warranty.
- Unauthorized service will void the warranty.
- If the product had failures or was wetted, do not use it until it is repaired by professionals.
- Changes made to the specifications or designs may not be reflected in this manual.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read More About This Manual & Download PDF: