VFORCE GRILL 2.0 Mask Instruction Manual
- June 6, 2024
- VFORCE
Table of Contents
 Use and Care Instructions for
Paintball Vision System
One size fits most
This product meets ASTM standards F 1776
Instruction Manual
With your VFORCE™ GRILL 2.0™ mask, you have the latest in goggle technology and the best quality and comfort available.
This Mask protects from both 50cal and 68cal paintballs and includes a
standard Dual-Pane Thermal Lens.
This Paintball Mask provides basic head coverage. Head Protection is further
increased with included visor accessory.
VFORCE™ GRILL 2.0™ has a number of unique features, such as:
- Quick-Change™ ClickDry™ Foam – Swap to a clean, dry, comfortable foam set in a snap!
- Low Profile, Lightweight Design – Sunglass-inspired sleekness in a hard-to-hit low profile shape…
- QuickChange™ ThermoCured™ AntiFog Lens – The standard of the industry for clear, fog-free vision.
- Optional Lenses – The world-famous Quick-Change™ lens lets you swap the lens in a wink to clean or replace it with a tinted lens for different light conditions.
GOGGLES ARE FOR PAINTBALL ACTIVITIES ONLY AND NOT FOR INDUSTRIAL USE.
Every VFORCE™ mask has been handcrafted from the finest materials modern technology can provide. We test and refine everything we make to ensure you get reliable performance from a quality product.
Meets or exceeds International Standards for:
CCQS Certification Services Ltd. NB 2834
Block 1, Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown,
Dublin, D15 AKK1, Ireland
WARNING
Read and follow carefully the instructions and warnings contained in this
manual. Failure to observe all instructions and warnings could lead to severe
or permanent injuries. Remember that your mask cannot offer protection in all
situations.
- ALWAYS wear your mask when you are within or near an area in which paintball markers are being used or when using or handling a paintball marker.
- NEVER remove or lift your mask in the playing area, even if the lens fogs or gets dirty. If your mask accidentally comes off, throw yourself on the ground and protect your eyes. Tell the players to stop shooting and ask the referees or one of the other players to help you leave the area with your eyes covered.
- Make sure the lens and the lens retention clips are firmly in place before wearing the mask.
- Before the beginning of the game, all paintball markers must be chronograph had to ensure that the speed of the paintballs does not exceed 300 f.p.s. (91 m/s). Higher speeds could exceed the resistance limits of your mask and lead to serious or permanent injury. Do not play if the speed of the paintballs exceeds 300 f.p.s., or if speed is not verified.
- Always follow all safety rules regarding the game and the handling of paintball markers.
- In rare cases, any mask may cause irritation and should not be worn by persons who are subject to dermatitis. Discontinue the use of the mask immediately in case of irritation and consult your physician.
- Always wear your mask with a visor and chin strap securely attached as per instructions.
| DIAGRAM NUMBER | PART DISCRIPTION | SKU |
|---|---|---|
| 1 | HEADSTRAMP ASSEMBLY | 2,3438 |
| 2 | SKIRT SKIRT W/ NAM PLATES | 23439 |
| 3 | FRAME | 23440 |
| 4 | BUTTON LOCK PIN | 23443 |
| 5 | -LENS LOCK RH | 23442 |
| 6 | LENS LOCK LH | 23441 |
| 7 | CHINSTRAP ASSEMbLY | N/A |
| 8 | son EAR SET (UR) – BLK`GRY + RIVETS | 23422 |
| 9 | REPLACEMENT FOAM SET TOPsoncau | 23422 |
| 10 | LENS – DERMAL CLEAR | 23361 |
| 11 | VISOR | 23444 |
PROPER MASK FIT
Check that the strap is inserted properly in the slots provided in the mask
and that it fits snugly around your head. Ensure that the foam around the lens
sits closely around your eyes.
The mask’s chin strap should be fastened and secured at all times during play.
Simply adjust the chin strap so it rests comfortably against your chin, then
fasten the strap buckles.
WARNING
Before each game, breathe on the inside surface of the lens. If it fogs up
before you use your mask: replace the lens or treat it with VForce anti-fog
solution.
WARNING
No paintball mask can prevent fogging under all conditions. If your lens fogs
up NEVER remove your mask in the playing area!
V-Force is a brand of Kore Outdoor US inc.
PATENT(S): See www.paintballsolutions.com/patents © 2020 Kore Outdoor US inc.
All rights reserved. This Kore Outdoor US inc. product is protected by one or
more United States patents. Kore Outdoor US inc. Trademarks, Designs and
Copyrights are protected by one or more United States patents and
International Law. For more information contact Kore Outdoor US inc. at
info@koreoutdoor.com
www.paintballsolutions.com
MASK AND LENS CARE
Your VFORCE™ mask comes with a polycarbonate Dual Pane Thermal lens treated with scratch-resistant coating. More information on the lens is provided in the next section of this manual.
CLEANING
- Clean your lens within two hours of any contact with paintball fills or residues. Remove the lens from the mask to ensure that all surfaces of the lens and the mask are thoroughly cleaned with clean water.
- Use only clean warm water to clean the lens. DO NOT USE any other products or cleaners, as they could contain substances that may damage or weaken the lens, or reduce the Anti-Fog effect. Change the lens if it has come in contact with chemical products or fumes.
- To dry the lens, simply air dry, or use a clean soft cloth or micro-fiber on the outside of the lens. DO NOT RUB THE INSIDE OF THE LENS. DO NOT USE substances that could scratch or dull the lens, like newspaper, paper towels or clothing. It is normal for the anti-fog coating on the inside surface to go through a tacky phase while drying. To dry this surface, blot with a soft clean cloth and let it dry. Do not rub the inside, as it will streak, and you will have to begin again.
ANTI-FOG TREATMENT
- Despite the longest-lasting ThermoCured™ Anti-Fog process available, over time the unit-fog process available, over time the anti-fog treatment may lose its effectiveness. When this happens, only use the VForce™ Anti-Fog solution. Do not use any other products, since it could weaken or damage the lens.
STORAGE
- Ensure that your VForce™ mask is clean before storing it. Protect the lens against impacts and scratches. Store your mask in a cool, clean and dry place, far from chemical products or fumes and protected from high temperatures.
LENS INFORMATION
VFORCE™ offers 4 lens types with varied transmissions to provide optimum vision in lighting conditions.
- CLEAR Dual Pane Thermal Lens for everyday use.
- SMOKE Dual Pane Thermal Lens for bright days.
- YELLOW Dual Pane Thermal Lens for cloudy days or deep woods.
- HDR Dual Pane Thermal Lens for harsh sunlight and overcast conditions.
LENS REMOVAL
WARNING
Check the lens before and after each use. Replace the lens after one year of
use, even if it seems to be intact. Replace the lens immediately if it shows
cracks or if it has received a direct impact from a ball shot from a distance
of less than 10 feet (3 m).
|
---|---
1. Unclip the Strap by pressing on both sides of the Clip.| 2. Lift the Lock
Clip free of the Frame.
|
3. Press the tabs on the sides of the Lens to remove them from the Frame.|
4. Push the Lens out of the Frame.
LENS INSTALLATION
WARNING
Use only VFORCE™ approved lenses that have been designed for your mask.
|
---|---
1. Insert the Lens and secure each tab of the Lens into the Frame.| 2. Place
the Lock Clips back into the Mask under the Lens tabs, marked L for left, R
for right.
3. Push the Strap Clip through the loop in the Soft Ear and securely into the
Lock Clip.
WARNING
Ensure that the lens is firmly in place before wearing the mask. Do not make
any modifications to your mask. Use only accessories that have been approved
for your VFORCE™ mask. Depending on the shape of your head, it may be
necessary to wear additional ear and face protection. The retention strap is
not an ear protector.
FOAM REMOVAL
|
---|---
1. The Upper and Lower Foam Holders are attached to the Frame using a post-
and-hole system.| 2. Grip the Upper Foam Holder and pull it away from the
Frame and then repeat with the Lower Foam Holder.
FOAM INSTALLATION
|
---|---
1. Match the shape of the Lower Foam Holder to the lower section of the
Frame and align the posts with the holes.| 2. Completely press each post into
the corresponding hole and then repeat with the Upper Foam Holder
MOUNTING THE VISOR
|
---|---
1. Align the posts of the Visor with the holes in the Frame.| 2. Completely
press each post into the corresponding hole.
STRAP REPLACEMENT
| 1. Press the upper tab | 3. Remove the strap |
|---|---|
| 2. Pivot and pull in the same motion | 4. Clip the strap back |
VFORCE™ Vision Systems
2955 South Maplecrest Road
Fort Wayne, IN 46803
www.vforce.com
MADE IN TAIWAN VFORCE™ and GRILL™
are Registered Trademarks| G.I. Sportz Europe Ltd.
Adrenaline House Brooklands Park
Farningham Road
Crowborough TN6 2JD
Great Britain
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>