HDMI 2.0 Audio Extractor User Manual
- June 6, 2024
- HDMI
Table of Contents
HDMI 2.0 Audio Extractor
Introduction:
This audio splitter can be connected between the source device (DVD player, Blu-ray player, network player, set-top box, PS2, PS3, PS4,PS5,Xbox360, PC, etc.) and the display device (TV, HD monitor, projector), It can synchronously separate one optical fiber signal and connect one stereo channel to the sound system to obtain high-quality audio signals. Support audio formats such as AC-3, DTS, LPCM.
Features:
- Support 1 HDMI input port
- Support 1 HDMI output port
- Support 1 optical fiber digital audio output port
- Support 1 stereo audio output port
- Support 4K/60fps resolution input
- Support 3D, HDR. YUV4:4:4
- Support HDCP2.2
- Support AC3, DTS, LPCM and other digital audio formats
- Audio output supports 3 EDID selection modes (2CH/5.1CH/ PASS)
- No signal loss
- Simple installation
Specifications:
- HDCP Version ………………………………………….HDCP 2.2
- Input/Output Resolution………………………..1080p/60fps, 4K/30fps、4K/60fps
- Deep color……………………………4K/60fps-YUV444-8bit; 4K/60fps-YUV422-12 bit 2160p, 10/12 bits, 50/60Hz
- HDMI MaxBandwidth……………………………………600MHz
- HDMI Max Baud Rate…………………………………..18Gbps
- Input Output TMDS Signal……………….0.5~1.5Vp-p(TTL)
- Input Output DDC Signal………………………….5Vp-p(TTL)
- DAC sampling frequency ……………………….32~192 KHz
- DAC bit rate………………………………………………16~24 Bit
- RCA analog output (1KHz@0dB)…………………..1V RMS
- Signal to noise ratio @0dB(CC1R/ARM)………….≥90dB
- Distortion degree…………………………………………..≤0.1%
- Frequency response…………………………….20HZ~20KHz
- HDMI Input Cable Distance……….≤3m AWG26 HDMI Standard Cable
- HDMI Output Cable Distance…….≤3m AWG26 HDMI Standard Cable
- Max Working Current……………………………………..400mA
- Power Adapter Format……..AC 100V-240V 50/60HZ,DC 5V/1A
- Operating Temperature Range…………………..-10~+55℃
- Storage Temperature Range………………………-20~+60℃
- Operating Humidity Range………………….10~90%RH(No Condensation)
- Storage Humidity Range……………………..5~95%RH(No Condensation)
- Case Dimension…………………………..85×60.5×20(mm)
- Weight…………………………………………………………….130g
Diagram of Interfaces:
- HD audio video output interface.
- HDMI output LED indicator Will light when extractor is connected to the TV correctly.
- Digital audio output interface.
- Analog audio output interface.
- DC +5V Power supply interface.
- Will light up in red when power is on.
- HD audio video signal input interface which connect to input device.
- Audio format(EDID)selection switch
PASS: When the witch is shifted to this position, the audio signal format
output from the adapter is according to TV default audio format(EDID).
2CH: When the witch is shifted to this position, the Toslink interface of
the adapter will output 2ch digital audio signal;L/R interface will output
analog 2ch audio signal.
5.1CH: When the witch is shifted to this position, the Toslink interface
of the adapter will output 5.1ch digital audio signal.
Connection and Operation
-
Connect the DVD/BD HDMI HD output to the HDMI input of the splitter via the HDMI cable.
-
Connect the HDMI output of the splitter to the TV/display HDMI input via the HDMI cable.
-
When digital audio is required, connect it from the OPTICAL output of the splitter to the fiber input of the amplifier through the fiber optic cable.
-
When analog audio is required, connect the 2-channel analog audio to the TV or amplifier analog audio input via the RCA audio cable.
Note that the channels correspond one-to-one and the EDID mode switch is selected in 2CH mode. -
Finally connect the DC head of the power adapter to the DC input of the decoder, and then plug the adapter into the power outlet.
Package Contents:
1pcs……HDMI Audio Extractor
1pcs……DC5V/1A Power Adapter or USB Power Cable
1pcs……User Manual
Notes:
In order to prolong the service life, please pay attention to the following
points:
- Please do not expose this unit to the damp, high-temperature, dusty, erosive, or oxidative environment, and make sure that no objects filled with liquids are placed on the unit,such as vases.
- Please handle the item with care and clean only with dry cloth.
- Please do not touch the item with wet hands.
- Please hold the plug when unplugging. Do not pull the power cable directly.
- Please turn the unit off when it is not in use for a long period of time.
- To prevent risk of electric shock or fire hazard due to overheating, please do not obstruct the unit with newspapers, tablecloths, curtains or similar items or open the shell while it is working.
- Please use 5V USB cable and 5V/1A plug.