FORCE USA USA F-MLPHS Ultimate 45 Degree Leg Press Hack Squat Combo User Manual
- June 6, 2024
- FORCE USA
Table of Contents
User Manual
F-MLPHS
ASSEMBLY MANUAL
BEFORE YOU START
Read all instructions in this manual before assembling or using this
equipment.
Remove all parts from the packaging and separate and count each various
component to ensure everything has been correctly provided.
Follow the instructions and consult both the individual assembly pages and the
overall expanded views of the equipment.
It is the owner’s responsibility to ensure that all users of this unit have
read the owner’s manual and are familiar with the safety precautions.
We recommended you keep these Instructions.
SAFETY PRECAUTIONS
- Highly recommended for two or more people to assemble the equipment
- Assemble equipment on a flat surface
- Consider placing a mat under equipment to protect your floor
- Only tighten nuts and bolts by hand until the whole equipment is assembled
- Ensure all parts are in working order prior to use
- Do not use equipment outdoors or around water
- Keep hair, fingers, and clothing away from moving parts
- Only use attachments recommended by the manufacturer
- Never operate if parts are not functioning correctly
- Always stretch prior to using equipment
- Stop immediately if you experience any pain, dizziness, or nausea.
- Before starting any exercise program consult your doctor
IMPORTANT ASSEMBLY INFORMATION
NOTE: It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
FASTENING NUTS AND BOLTS
- Only tighten all nuts and bolts after all components have been fully assembled.
- Do not overtighten any component with pivoting function.
- Make sure all pivoting components are able to move freely.
Place all parts in a cleared area and remove the packing materials. Do not
dispose of the packing materials until you complete all assembly steps.
PLEASE NOTE: Descriptions of pieces as LEFT and RIGHT are from the point of
view of standing behind the equipment facing towards the front.
PARTS LIST
NOTE: SOME PARTS MAY COME PRE-ASSEMBLED, IN WHICH CASE CONTINUE ONTO THE
NEXT
REQUIRED STEP OF ASSEMBLY
| KEY NO. | PART DESCRIPTION | SPEC | QTY |
|---|---|---|---|
| 1 | Left Stabilizer | 1 | |
| 2 | Right Stabilizer | 1 | |
| 3 | Front Connecting Frame | 1 | |
| 4 | Rear Connecting Frame | 1 | |
| 5 | Support Frame | 2 | |
| 6 | Frame | 2 | |
| 7 | Lower Crossmember | 1 | |
| 8 | Upper Crossmember | 1 | |
| 9 | Guide Rod | 2 | |
| 10 | Sliding Frame | 1 | |
| 11 | Upper Foot Support | 1 | |
| 12 | Upper Adjuster | 1 | |
| 13 | Lower Adjuster | 1 | |
| 14 | Left Shoulder Pad Mount | 1 | |
| 15 | Right Shoulder Pad Mount | 1 | |
| 16 | Lock Out | 2 | |
| 17 | Adjuster-Outside | 1 | |
| 18 | Adjuster-Inside | 1 | |
| 19 | Lower Weight Carriage | 1 | |
| 20 | Upper Weight Carriage | 1 | |
| 21 | Left Hand Stand | 1 | |
| 22 | Right Hand Stand | 1 | |
| 23 | Weights Stow Bracket | 4 | |
| 24 | Lock Out Left | 1 | |
| 25 | Lock Out Right | 1 | |
| 26 | Backrest Pad Mount | 1 | |
| 27 | Weights Post | 4 | |
| 28 | Barbell rod | 1 | |
| 29 | Aide | 4 | |
| 30 | Safety Support | 1 | |
| 31 | Foot Support | 1 | |
| 32 | Bracket | 240x158x5 | 4 |
| 33 | Bracket | 180x50x4 | 2 |
| 34 | Bracket | 120x50x3 | 2 |
| 35 | Bracket | 120x101x4 | 2 |
| 36 | Bracket | 120x70x3 | 4 |
| 37 | Moving Lock Pin | 1 | |
| 38 | Backrest Pad | 800x360x70 | 1 |
| 39 | Seat Pad | 380x270x70 | 1 |
| 40 | Shoulder Pad | 500x120x70 | 2 |
| 41 | Rollers | 8 | |
| 42 | Olympic Sleeve | 050×210 | 6 |
| 43 | Weight Bar Olympic Sleeve | (D50 x 335 | 2 |
| 44 | End Cap | E50 | 2 |
| --- | --- | --- | --- |
| 45 | End Cap | ❑45 | 7 |
| 46 | End Cap | 025 | 18 |
| 47 | End Cap | :=150×100 | 2 |
| 48 | End Cap | 760 | 1 |
| 49 | End Cap | L– 70×50 | 3 |
| 50 | End Cap | ‘_:40×20 | 4 |
| 51 | Sliding Sleeve | .60x_750 | 1 |
| 52 | Bumper | 100x50x25 | 1 |
| 53 | Lock Pin | 016 | 1 |
| 54 | Spring | 043x027x08x80 | 2 |
| 55 | Grip | 023×150 | 4 |
| 56 | Magnetic Pin | 2 | |
| 57 | Spring Clip | (D49 | 8 |
| 58 | Hexagon socket button head screws | M8x25 | 2 |
| 59 | Allen Bolt | M8x16 | 8 |
| 60 | Allen Screw | M10x10 | 1 |
| 61 | Allen Bolt | M10x25 | 2 |
| 62 | Hex Bolt | M12x25 | 4 |
| 63 | Hex Bolt | M12x110 | 8 |
| 64 | Hex Bolt | M10x125 | 8 |
| 65 | Hex Bolt | M10x120 | 4 |
| 66 | Hex Bolt | M10x115 | 4 |
| 67 | Hex Bolt | M10x110 | 2 |
| 68 | Hex Bolt | M10x70 | 40 |
| 69 | Hex Bolt | M10x95 | 2 |
| 70 | Hex Bolt | M10x20 | 14 |
| 71 | Hex Bolt | M8x60 | 4 |
| 72 | Hex Bolt | M8x35 | 4 |
| 73 | Socket countersunk head screw | M8x20 | 4 |
| 74 | Carriage Bolts | M10x70 | 2 |
| 75 | Aircraft Nut | M12 | 8 |
| 76 | Aircraft Nut | M10 | 64 |
| 77 | Washer | 12 | 20 |
| 78 | Washer | 10 | 134 |
| 79 | Washer | 8 | 16 |
| 80 | Larger Washer | 010x030x2 | 6 |
| 81 | Hex Bolt | M10x75 | 2 |
| Allen Wrench | 8# | 1 | |
| Allen Wrench | 5# | 1 | |
| Allen Wrench | 4# | 1 |
Assembled Dimension: 2385mm x 1510mm x 1980mm
| 
---|---
| 
| 
| 
| 
| 
| 
| 
| 
---|---
EXPLODED DIAGRAM
PACKAGE LIST
| BOX 1: | BOX 3: |
|---|---|
| 1 | Part 1 |
| 1 | Part 2 |
| 2 | Part 5 |
| 2 | Part 6 |
| 2 | Part 43 |
| BOX 2: | 1 |
| 1 | Part 7 |
| 1 | Part 8 |
| 1 | Part 10 |
| 1 | Part 11 |
| 4 | Part 23 |
| 2 | Part 33 |
| 2 | Part 34 |
| 2 | Part 35 |
| 4 | Part 36 |
| 1 | Part 39 |
| 2 | Part 40 |
| 6 | Part 42 |
| Parts bag 8-1 | 2 |
| Parts bag 8-2 | BOX 4: |
| Parts bag 8-3 | 2 |
| Parts bag 8-4 | 2 |
| Parts bag 8-5 | 1 |
| Parts bag 8-6 | 1 |
| Parts bag 8-7 | 1 |
| Parts bag 8-8 | 1 |
| 1 | |
| 4 | |
| 1 | |
| 4 |
We believe success comes from striving to be better than yesterday. It comes from the urge to push boundaries and break through barriers. Fueled with the belief that everybody deserves a fit and healthy lifestyle, we are dedicated to providing innovative strength and fitness solutions to build stronger. happier and healthier lives.
WARRANTY
LIFETIME WARRANTY ON FRAME – 2 YEAR WARRANTY ON MOVING PARTS
The Force USA range of strength equipment carries a Lifetime Structural Warranty along with two years’ covers on all cables and pulleys. This warranty applies to first owners and does not cover second-hand equipment or re-sold equipment. This Force USA warranty covers only failures due to defects in structural, cables, and pulleys and workmanship that occur during regular home use. It will not cover damage that occurs in transport/delivery or failure due to misuse, abuse, neglect, misapplication, alteration, or improper assembly of the product. This warranty does not cover the use or failure of equipment in- studio commercial applications. The replacement or repair provided under the Force USA warranty is the responsibility of the user, and the customer will be responsible for any freight charges that apply. Force USA will not be liable for any consequential damages or breach of any implied warranty on the range of Force USA strength equipment. Force USA reserves the right to provide reconditioned parts and/or to request a return and repair of existing defective components on the Force USA product.
Force USA uses commercial-grade upholstery for all Force USA strength equipment. The commercial vinyl comes with a rip-stop mesh backing to help prevent rips and tears.