FORCE USA G3 All in One Trainer Leg Press Attachment User Manual
- June 6, 2024
- FORCE USA
Table of Contents
FORCE USA G3 All in One Trainer Leg Press Attachment
BEFORE YOU START
Read all instructions in this manual before assembling or using this
equipment.
Remove all parts from the packaging and separate and count each various
component to ensure everything has been correctly provided.
Follow the instructions and consult both the individual assembly pages and the
overall expanded views of the equipment.
It is the owner’s responsibility to ensure that all users of this unit have
read the owner’s manual and are familiar with the safety precautions.
We recommended you keep these instructions.
SAFETY PRECAUTIONS
- Highly recommended for two or more people to assemble the equipment
- Assemble equipment on a flat surface
- Consider placing a mat under equipment to protect your floor
- Only tighten nuts and bolts by hand until whole equipment is assembled
- Ensure all parts are in working order prior to use
- Do not use equipment outdoors or around water
- Keep hair, fingers and clothing away from moving parts
- Only use attachments recommended by the manufacturer
- Never operate if parts are not functioning correctly
- Always stretch prior to using equipment
- Stop immediately if you experience any pain, dizziness or nausea.
- Before starting any exercise program consult your doctor
IMPORTANT ASSEMBLY INFORMATION
NOTE: It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
- Tools Required for Assembling the Bench: Adjustable Wrench and Allen Wrench.
- Ensure Carriage Bolts are inserted through the SOUARE holes on components that need to be assembled. Attach washer only to end of the carriage Bolt.
- Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to be assembled.
- Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not tighten each bolt right after it is installed
FASTEN NUTS AND BOLTS
Securely tighten all Nuts and Bolts after all components have been assembled
in current and previous steps.
NOTE: Do not over tighten any component with pivoting function. Make sure
all pivoting components are able to move freely.
Do not tighten all Nuts and Bolts in this step.
PARTS LIST
NOTE: SOME PARTS MAY COME PRE ASSEMBLED, IN WHICH CASE CONTINUE ONTO THE NEXT REQUIRED STEP OF ASSEMBLY.
| KEY NO. | PART DESCRIPTION | SPEC | QTY |
|---|---|---|---|
| 1 | Safety bracket L | 1 | |
| 2 | Safety bracket R | 1 | |
| 3 | Foot Pedal Set | 1 | |
| 4 | Fixed group | 2 | |
| 5 | Hexagon socket button head screws | M8X20 | 2 |
| 6 | U Spring Pins | 10X80 | 2 |
| 7 | Cover Cap | 30Xcp26X12 | 2 |
| 8 | L Spring Pins | 10X115 | 2 |
| 9 | Rubber sleeve | 13XCl)9.5X58 | 2 |
| 10 | Limit sets | 25.5Xcp30Xcp45X60 | 8 |
| 11 | Dips Handle | 23X150 | 2 |
| 12 | Rectangular End Cap | 32 | 4 |
| 13 | Bushing | 38Xcp34Xcp25X22 | 4 |
| 14 | Self-tapping screws | M6X16 | 8 |
| 15 | Sunk Screw | M &x20 | 2 |
| 16 | Hex Bolt | M10X55 | 2 |
| 17 | Lock Washer | 10 | 2 |
| 18 | Washer | 10 | 2 |
| Allen wrench | 6# | 1 | |
| Allen wrench | 4# | 1 |
Assembled Dimension: 1780mm x 405mm x90mm
EXPLODED DIAGRAM
The F-G3-BASE shown with available attachments
F-G3-LEGPRESS
F- SEAT
F-G3-CHIN-01
F-STABILITYB
PACKAGE LIST
| BOX 1: | BOX 2: |
|---|---|
| 1 | Part 1 |
| 1 | Part 2 |
INNOVATION IN STRENGTH ™
Success doesn’t come from sitting on your ass. Success comes from striving to
be better than yesterday. It comes from the urge to push boundaries and break
through barriers. We know this because we’ve been there from selling the first
piece of Force USA gear in 2007 to providing commercial and home gym equipment
all over the globe. We are for helping you become your strongest self. We are
for INNOVATION IN STRENGTH ™
WARRANTY
LIFETIME WARRANTY ON FRAME-2 YEAR WARRANTY ON MOVING PARTS
The Force USA range of strength equipment carries a Lifetime Structural
Warranty along with two years cover on all cables and pulleys. This warranty
applies to first owners and does not cover second-hand equipment or re-sold
equipment. This Force USA warranty covers only failures due to defects in
structural, cables and pulleys and workmanship that occur during regular home
use. It will not cover damage that occurs in transport/delivery or failure due
to misuse, abuse, neglect, misapplication, alteration or improper assembly of
the product. This warranty does not cover the use or failure of equipment in-
studio commercial applications. The replacement or repair provided for under
the Force USA warranty is the responsibility of the user, and the customer
will be responsible for any freight charges that apply. Force USA will not be
liable for any consequential damages or breach of any implied warranty on the
range of Force USA strength equipment. Force USA reserves the right to provide
reconditioned parts and/or to request a return and repair existing defective
components on the Force USA product.
Force USA uses commercial-grade upholstery for all Force USA strength
equipment. The commercial vinyl comes with a rip-stop mesh backing to help
prevent rips and tears.
FORCEUSA.COM