SHUXAG LIGHT-PMGD-A1 LED Reading Desk Lamp with No Glare Instruction Manual
- June 6, 2024
- SHUXAG
Table of Contents
SHUXAG LIGHT-PMGD-A1 LED Reading Desk Lamp with No Glare Instruction
Manual
Main Features and Technical Parameters
- Input power supply: DC5V/1A
- Rated power: 4.5W
- Adjustment of light mode: Capacitive touch switches, Sliding dimming
- Light Source: light-emitting diode
- Three mode light switch: natural-white-warm white
Product Illustration
Instruction
-
Hold the lamp pole, open the rotation cover at the bottom, place the product on the computer screen stably; connect one end of the USB cable to the power input interface of the product, and the other end to the power output or with USB 5V output device to connect the power supply.
-
Lamp ON/OFF button .
Short touch: Lamp ON/OFF. -
Lamp switch button M:
Short touch: the color temperature of different lights can be switched, which is (natural light→white light→warm white light) cycle switching. -
Lamp slider button:
Touch the slider icon to adjust the brightness. Slide from “-” to ” +”, brightness will increase. Slide from “+” to “- “, brightness will decrease. -
Pole angle adjustment:
Hold the fixed holder, gently pinch the lamp pole, and swing up and down to adjust the required angle, maximum 35°.
Cautions
- This product is for indoor use only.
- This product might be turned on or off’ under strong electromagnetic wave.
- The light source in this lamp shall be replaced by the manufacturer or its service agent or someone with similar qualifications.
- When the moving part of the product is stretched or rotated to the limited position, don’t pulled strongly to avoid damage.
- Suggest to adjust the color temperature (light effect) to below than 4000K when at night (like natural light, wan white light is better)
Packing Accessories
- USB cable * 1
- Instruction manual * 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>